تاثیر خنک کننده برودتی بر توپوگرافی سطح در فرایند سنگ‌زنی پلی اتر اتر کتون(PEEK)

نوع مقاله : مقاله پژوهشی

نویسندگان

1 گروه مهندسی مکانیک-ساخت و تولید، دانشکده فنی و مهندسی، دانشگاه بیرجند

2 موسسه KSF، دانشگاه فورتوانگن، شهر توتلینگن، آلمان

3 هیئت علمی دانشگاه نیشابور

چکیده

با توجه به رشد روز افزون استفاده از پلیمرهای مخصوص در صنایع، به ویژه صنایع پزشکی و هوایی لزوم بررسی و مطالعه روز افزون تولید و ماشینکاری این مواد احساس می‌گردد. پلی اتر اتر کتون (پیک) یک پلیمر مقاوم در برابر گرما است که امروزه به کرات در حال استفاده در صنایع پزشکی است. سنگ‌زنی یکی از فرایندهای مهم ماشینکاری این ماده محسوب می‌شود. استفاده از مایعات روانکار و خنک کننده در ماشینکاری پیک مطلوب نیست زیرا قطعات سنگ زده شده قبل از مصرف باید درچند مرحله تمیزکاری شوند. در این مقاله از فن آوری خنک کننده برودتی به عنوان یکی از خنک‌کنندهای نو ظهور در عرصه ماشینکاری که قابلیت بسیار بالای دارد، دارای اثرات منفی زیست محیطی نیست و نیاز به تمیزکاری قطعات ماشینکاری شده را شدیدا کاهش می‌دهد، جهت خنک‌کاری منطقه ماشینکاری استفاده شده است. یکی از موارد مهم خروجی ماشینکاری، یکپارچگی سطح است. یکپارچگی و زبری سطح اهمیت بالای در کارایی محصول نهایی دارند و پارامتر مهمی برای بررسی قابلیت ماشینکاری محسوب می‌شوند. مقایسه نتایج استفاده از هوای فشرده و خنک کننده برودتی بر زبری سطح و شرایط سطح ایجاد شده نشان دهنده تاثیر قابل توجه خنک کننده برودتی بر خروجی مورد مطالعه این پژوهش بوده است.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

The effect of cryogenic cooling on surface topography in the PEEK grinding process

نویسندگان [English]

  • Mohammad Khoran 1
  • Bahman Azarhoushang 2
  • Hossain AmirAbadi 3
1 Department of Engineering, Birjand university, Birjand, Iran
2 KSF institute, HFU, Tuttlingen, Germany
3 Member of faculty, Birjand University
چکیده [English]

Due to the increasing applicant of special polymers in industries, especially in the medical and aerospace industries, it is necessary to study and investigate the production and machining of these materials. Polyether ether ketone is a heat resistant polymer that is used in the medical industry nowadays. Grinding is one of the important machining processes of this material. Using conventional lubricants and cooling liquids is not optimal in machining of PEEK, because grinded workpiece must be cleaned several steps before use. In this paper, cryogenic cooling technology, as one of the newly emerging cooling systems in the field of machining that have a very high ability, does not have a negative environmental impact, and greatly reduces need to clean machining parts, has been used for cooling of the machining zone. One of the important issues of machining output parameters is surface integrity. Surface Integrity and roughness have a high importance in the performance of the finished product and is an important parameter for investigation the machinability. Comparison of the results of using compressed air and cryogenic cooling on surface roughness and surface conditions indicate the significant effect of cryogenic cooling on the output of this study

کلیدواژه‌ها [English]

  • Grinding
  • Surface roughness
  • Cryogenic cooling
  • PEEK