Iranian Journal of Manufacturing Engineering

Articles in Press: ALL Accepted Manuscript Corrected Proof

Presentation of a new construction methodology and experimental study of the energy absorption of pyramid core sandwich panels

Volume 8, Issue 7, September 2021, Pages 10-19

Ako Parsa; Mojtaba Yazdani

Study of hardness and impact resistance in Friction Stir Welding process with Bobbin tool in Aluminum 6061-T6 alloy

Volume 9, Issue 1, April 2022, Pages 10-18

10.22034/ijme.2022.155982

meysam eksiri; mohamad Azimi Aghghaleh; Nasrolah Bani Mostafa Arab; Soroush Parvizi

Experimental investigation of mechanical and microscopic properties of ABS-Ni composite made by Fused Deposition Modeling (FDM) method

Volume 9, Issue 9, November 2022, Pages 10-20

10.22034/ijme.2023.371411.1716

Siavash Moayedi Manizani; Jamal Zamani Ashani; Mohammad Salehi

Design and manufacturing of three layer pressure vessel by Shrink fit process

Volume 9, Issue 12, February 2023, Pages 10-18

10.22034/ijme.2023.403285.1797

Amir Naseroleslami; Hadi Eivazi Bagheri; Seyyed Mohammad Vahab Mousavi; Salman Seyyed Afghahi

Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams

Volume 10, Issue 7, September 2023, Pages 10-16

10.22034/ijme.2024.433989.1907

Nima Feizlou; Taher Azdast; Rezgar Hasanzadeh; Milad Rostami; nima ashrafi

The Effect of Thickness, Welding Metals Sequence and Composition on Residual Stresses in Welding Gas Steel Pipes using LTT filler

Volume 8, Issue 2, April 2021, Pages 11-22

alireza jami; mohammadreza khoshravan azar; Mojtaba Yazdani

The effect of H900 and H1150 heat treatment on the machinability of 15-5 PH stainless steel

Volume 8, Issue 12, March 2022, Pages 11-20

Mostafa Elyasi; Hamid Soleimanimehr; Adel Maghsoudpour; Ali Akhavan Farid

Design and construction of advanced sorting inorder to chromite segregation

Volume 9, Issue 3, June 2022, Pages 11-17

10.22034/ijme.2022.157664

Masumeh Ghorbani; Shahin Mesroghli

Investigating the mechanical behavior of the infinity structure inspired by the silkworm cocoon and comparing it with the rod structure for use in architectural cellular structures

Volume 9, Issue 6, September 2022, Pages 11-23

10.22034/ijme.2022.160938

Mostafa Hosseini Vajari; Hossein Moradi Nasab; Morteza Behzadnasab; Mahmoud Nikkhah Shahmirzadi; Majid Soltani

Investigation of process parameters of the hydrodynamic deep drawing assisted by radial pressure using Taguchi and finite element methods

Volume 9, Issue 10, December 2022, Pages 11-20

10.22034/ijme.2023.390896.1762

Vahid Modanloo; Hossein Talebi-Ghadikolaee; Behnam Akhoundi; Ahmad Mashayekhi; Farzad Ahmadi Khatir; Ali Zeinolabedin Beygi

Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates

Volume 10, Issue 1, March 2023, Pages 11-19

10.22034/ijme.2023.420505.1865

Alireza Moallemzadeh; Seyed Alireza Sabet; Hamed Saghafi

Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel

Volume 10, Issue 10, December 2023, Pages 11-25

10.22034/ijme.2023.417333.1832

Yaser Emamian; AliReza Kollahi; Yahya Palizdar

Experimental feasibility study of forming copper sheets by vacuum forming method

Volume 10, Issue 8, October 2023, Pages 11-19

10.22034/ijme.2024.432653.1892

Mohsen Khadem; Seyed Jalal Hemmati

Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling

Volume 10, Issue 9, November 2023, Pages 11-18

10.22034/ijme.2024.434413.1908

Aminollah Mohammadi; Alireza Fadaei Tehrani; Houman Rahnama

Optimization of surface roughness, striation and burr formation during machining of aluminum 2024-T351 with abrasive water jet machining

Volume 7, Issue 10, December 2020, Pages 12-25

Armin Rezaei; Ehsan Shakouri

Manufacturing gypsum composite with short fiber of bagasse (sugarcane wastes)

Volume 8, Issue 4, June 2021, Pages 12-18

S. Hossein Elahi; Mobina Fakhimi; mohamad Abdi

Experimental study and sobol sensitivity analysis in optimizing the effective parameters of dry turning process of aluminum alloy 6061-T6

Volume 8, Issue 8, October 2021, Pages 12-23

Vahid Tahmasbi; Ali Zeinolabedin Beygi; Hassan Moslemi Naeini

Suspension and trapping particles with a positive contrast factor and investigating the effect of particle volume in a liquid medium by the acoustophoretic phenomenon

Volume 9, Issue 4, July 2022, Pages 12-23

10.22034/ijme.2022.159958

Yousef Hojjat; Mohsen Ghazvini; Vahid Fartashvand; Alireza Khozestani

Development of an Integer Linear Programming for Automatic Layout Design in Blanking and Piercing Progressive Dies

Volume 9, Issue 8, October 2022, Pages 12-25

10.22034/ijme.2022.167385

Mehran Afshari; Behrooz Arezoo

Study of nonconductive Si3N4 ceramic machining ability by electrical discharge machining process by assisting electrode

Volume 9, Issue 5, August 2022, Pages 13-22

10.22034/ijme.2022.160055

Seyyed Salman Seyyed Afghahi; Farshad Soleymani; Hadi Eivazi Bagheri

Investigating the energy absorption quality of the porous Schwarz P structure made by 3D printing method

Volume 9, Issue 11, January 2023, Pages 13-20

10.22034/ijme.2023.383269.1744

Seyyed Mohammad Bagher Mirafzali; Ali Hasanabadi

Effect of Infill Percentage and Raster Angle in Fused Deposition Modeling (FDM) Process on Shape Memory Properties of Poly (lactic acid) and Comparison with Compression Molding

Volume 7, Issue 5, July 2020, Pages 14-23

sara abidaryan; َََAmir Hossein Behravesh; mohsen barmouz; seyyed kaveh hedayati

Experimental Investigation of Aluminum Foam Sandwich Panels under Quasi-static Loading

Volume 7, Issue 7, September 2020, Pages 14-23

Saeed Darab; mohammad hossein pol; Abbas Rahi

Investigation of the effect of surface transformation hardening by high power diode laser on the microstructure, hardness and wear behavior of AISI O1 cold work tool steel

Volume 8, Issue 1, March 2021, Pages 14-22

Amirsalar Dehghani; امیررضا فرنیا; Mohammad Javad Torkamany

Prototyping of piezoceramic-polymer composites using Solution Casting method for use in acoustic Transducers

Volume 8, Issue 5, July 2021, Pages 14-22

Mohammad Sadeghi kia; Hamid Ghasemi meyghani

Iranian Journal of Manufacturing Engineering

Journal Archive

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)