Volume & Issue: Articles in Press / Accepted Manuscript

Deposition of Continuous Glass Fibers on a Curved Surface by 3D Printer Based on Fused Filament Fabrication Technology

Articles in Press, Accepted Manuscript, Available Online from 08 January 2024

10.22034/ijme.2024.429126.1885

Behnam Akhoundi; Erfan Khosravian; Vahid Modanloo


The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding

Articles in Press, Accepted Manuscript, Available Online from 18 January 2024

10.22034/ijme.2024.418127.1841

Ali Dehghani; Sadegh Bidarmaghz; Mohammad Sedighi


Statistical Analysis and Optimization of Friction Stir Additive Manufacturing Process Variables for Aluminum Silicon Carbide Nanocomposite Using the Response Surface Method

Articles in Press, Accepted Manuscript, Available Online from 01 February 2024

10.22034/ijme.2024.431334.1888

Mohammad Sharifizadeh; nasrollah bani mostafa arab; Amir Refahi Oskouei


Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate

Articles in Press, Accepted Manuscript, Available Online from 05 February 2024

10.22034/ijme.2024.428239.1883

Parviz Asadi; Ali Fazli; Hossein Jafarzadeh; hossein maleki


The use of neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys

Articles in Press, Accepted Manuscript, Available Online from 13 February 2024

10.22034/ijme.2024.412021.1816

Amin Siahvashi; Mohammad Shahbazi; Seyed Ali Niknam


Failure Mode, Effects & Criticality Analysis on C.N.C lathe engine spindle system in Uncertain Condition

Articles in Press, Accepted Manuscript, Available Online from 15 February 2024

10.22034/ijme.2024.420051.1856

Masomeh Lajevardy; Masoud Vaseei; Hoori Davoodi; Mohammadreza Nasiri Jan Agha; Milad Abolghasemian


Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.422437.1870

Alireza Khouzestani; Mohammad Hossein Nasr-Esfahani; Yousef Hojjat; Marziyeh Tavalaee; Hesam Sadeghian


Production of aluminum-based composites from recycled chips by hot extrusion processing

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.432303.1889

Hamidreza Rezaei Ashtiani; Hossein Ehsani


Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending

Articles in Press, Accepted Manuscript, Available Online from 17 March 2024

10.22034/ijme.2024.419337.1849

Reihaneh Shahvari; Mohammad sajjad Gazor


Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites

Articles in Press, Accepted Manuscript, Available Online from 17 March 2024

10.22034/ijme.2024.435372.1917

Hossein Kazemi; Mazaher Salamat-Talab; Davood Ghanbari


Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.440510.1924

Amin Safi Jahanshahi; Majid Elyasi; Farzad Ahmadi Khatir


The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.434812.1912

Hossein Eidi; Iman Zohourkari


Effect of Temper and Quench Heat Treatment on Mechanical Properties and Microstructure of AISI 4130 to AISI 4340 Steel Joint with GTAW Process

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.423695.1876

MEHDI Mizabi asl; majid belbasi; Mohammad Ammar Mofid


An experimental study of GLARE 2/1 and 3/2 tensile behavior using Digital Image Correlation

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.427374.1881

Alborz Mohebi; Gholamhossein Majzoobi; Mohammad Kashfi


Investigating the energy absorption of sandwich panel with aluminum core and skin under Quasi-static loading: A numerical and experimental study

Articles in Press, Accepted Manuscript, Available Online from 02 May 2024

10.22034/ijme.2024.434159.1900

Hamid reza Rezayat; hossein toozandehjani; amir Zakeri


An investigation of residual stress distribution in friction drilling of AA-7075 sheets by finite element modeling

Articles in Press, Accepted Manuscript, Available Online from 04 May 2024

10.22034/ijme.2024.436544.1920

Alireza Bagheri bami; Mohammad Honarpisheh


Study of the effect of fumed silica on mechanical, electrical, and magnetic properties of epoxy/ fumed silica composite

Articles in Press, Accepted Manuscript, Available Online from 06 May 2024

10.22034/ijme.2024.426954.1879

Reza Sarkhosh; mohammad kazemi nasrabadi; Reza ParsaFar


Investigating the effect of polyurethane foam filling on the energy absorption of hybrid tubes with different thickness of composite layer

Articles in Press, Accepted Manuscript, Available Online from 06 May 2024

10.22034/ijme.2024.433178.1893

Vahid Zal; Hossein Talebi-Ghadikolaee; Sadegh Mirzamohammadi


Fabrication and characterization of the mechanical properties of Al1050-CNT composites using accumulative channel-die compression bonding process

Articles in Press, Accepted Manuscript, Available Online from 13 May 2024

10.22034/ijme.2024.437634.1922

Hossein Jafarzadeh; Ehsan Shalchi; Moharram Shameli


Designing and manufacturing of the ultrasonic cutting tools for cutting of polymeric based composites

Articles in Press, Accepted Manuscript, Available Online from 13 May 2024

10.22034/ijme.2024.442180.1928

Saba Javadian; Mohammad Moradi; Aminollah Mohammadi; Peiman Mosaddegh