[1] N. Biswas, J. L. Ding, Numerical study of the deformation and fracture behavior of porous Ti6Al4V alloy under static and dynamic loading,
International Journal of Impact Engineering, Vol. 82, pp. 89-102, 2015.
https://doi.org/10.1016/j.ijimpeng.2014.08.011
[2] A. Ajdari, H. Nayeb-Hashemi, A. Vaziri, Dynamic crushing and energy absorption of regular, irregular and functionally graded cellular structures,
International Journal of Solids and Structures, Vol. 48, No. 3-4, pp. 506-516, 2011.
https://doi.org/10.1016/j.ijsolstr.2010.10.018
[4] A. Faramarzian Haghighi, A. Haerian Ardakani, M. Kafaee Razavi, A. Moloodi, Simulation of Mechanical Behavior and Construction of Regular PLA Scaffolds, Modares Mechanical Engineering , Vol. 19, No. 8, pp. 1953-1958, 2019. (in Persian)
[6] S. Blanquer, M. Werner, M. Hannula, S. Sharifi, G. Lajoinie, D. Eglin, J. Hyttinen, A. Poot, D. Grijpma, Surface curvature in triply-periodic minimal surface architectures as a distinct design parameter in preparing advanced tissue engineering scaffolds,
Biofabrication, Vol. 9, No. 2, p. 025001, 2017.
https://doi.org/10.1088/1758-5090/aa6553
[7] J. Shin, S. Kim, D. Jeong, H. G. Lee, D. Lee, J. Y. Lim
, J. Kim, Finite Element Analysis of Schwarz P Surface Pore Geometries for Tissue-Engineered Scaffolds,
Mathematical Problems in Engineering, vol. 2012, p. 694194, 2012.
https://doi.org/10.1155/2012/694194
[8] S. Abdulqadir, A. Abdullah, Enhancement of Energy Absorption for Crashworthiness Application: Octagonal-Shape Longitudinal Members, International Journal of Advanced Engineering and Nano Technology, Vol. 2, No. 2, 2015.
[9] J. Contreras Raggio, C. Arancibia, C. Giovanetti, H.L. Ploeg, A. Aiyangar, J. Vivanco, Height-to-Diameter Ratio and Porosity Strongly Influence Bulk Compressive Mechanical Properties of 3D-Printed Polymer Scaffolds,
Polymers, Vol. 14, No. 22, p. 5017, 2022.
https://doi.org/10.3390/polym14225017
[10] L. Collini, C. Ursini, A. Kumar, Design and optimization of 3D fast printed cellular structures,
Material Design & Processing Communications, Vol. 3, No. 4, p. e227, 2021.
https://doi.org/10.1002/mdp2.227
[11] R. Ramadani, S. Pal, M. Kegl, J. Predan, D. Igor, S. Pehan, A. Belšak, Topology optimization and additive manufacturing in producing lightweight and low vibration gear body,
The International Journal of Advanced Manufacturing Technology, Vol. 113, pp. 3389–3399, 2021.
https://doi.org/10.1007/s00170-021-06841-w
[12] A. Hasanabadi, Microstructure design of heterogeneous material using multisided patch, Iranian manufacturing production engineering, Vol. 8, No. 2, pp. 32-40, 2021. (in Persian)
[13] M. Hosseini Vajari, M. Behzadnasab, An experimental investigation on mechanical properties of 3D-printed bio-inspired sandwich panels based on silk cocoon geometry, Iranian Journal of Manufacturing Engineering, Vol. 8, No. 4, pp. 19-26, 2021. (in Persian)
[14] M. Hosseini vajari, H. Moradi Nasab, M. Behzadnasab, M. Nikkhah Shahmirzadi, M. Soltani, Investigating the mechanical behavior of the infinity structure inspired by the silkworm cocoon and comparing it with the rod structure for use in architectural cellular structures, Iranian Journal of Manufacturing Engineering, Vol. 9, No. 6, pp. 11-23, 2022. (in Persian)
[15] Z.y. Zhang, H. Zhang, J. Zhang, S.k. Qin, M.d. Duan, Study on flow field characteristics of TPMS porous materials,
Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 45, p. 188, 2023.
https://doi.org/10.1007/s40430-023-04113-0
[16] M. Flores-Jimenez, R. Fuentes-Aguilar, A. García-González, Review on Porous Scaffolds Generation Process: A Tissue Engineering Approach,
ACS Applied Bio Materials, Vol.6, No. 1, pp. 1-23, 2023.
https://doi.org/10.1021/acsabm.2c00740
[17] M. Flores-Jimenez and R. Fuentes-Aguilar, Bone Tissue Scaffolds Designed With A Porosity Gradient Based On Triply Periodic Minimal Surfaces Using A Parametric Approach, Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2021.
[19] S. M. B. Mirafzali and A. Hasanabadi, Geometric Modeling of Functionally Graded Material Structures Using Multisided Patch, The 10th International Conference on Materials and Metallurgical Engineering, Online Tehran, Novamber 16-17, 2021.
[21] N. Shahrubudin, T. C. Lee, R. Ramlan, An Overview on 3D Printing Technology: Technological, Materials, and Applications,
Procedia Manufacturing, Vol. 35, pp. 1286-1296, 2019.
https://doi.org/10.1016/j.promfg.2019.06.089
[22] H. Kamel, O. Harraz, Developing an Optimized Low-Cost Transtibial Energy Storage and Release Prosthetic Foot Using Three-Dimensional Printing,
ASME J of Medical Diagnostics, Vol. 3, No. 2, p. 021103, 2020.
https://doi.org/10.1115/1.4046319
[23] H. Balakrishnan, A. Hassan, M. Imran, M. U. Wahit, Toughening of Polylactic Acid Nanocomposites: A Short Review,
Polymer-plastics Technology and Engineering, Vol. 51, No. 2, pp. 175-192, 2012.
https://doi.org/10.1080/03602559.2011.618329
[24] F. Vieira, A. Scari, P. Junior, J. Ribeiro, C. Magalhães, Analysis of Stresses in a Tapered Roller Bearing Using Three-Dimensional Photoelasticity and Stereolithography,
Materials, Vol. 12, No. 20, p. 3427, 2019.
https://doi.org/10.3390/ma12203427
[25] I. Ahmed, K. Sullivan, A. Priye, Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components,
Biosensors, Vol. 12, No. 8, p. 652, 2022.
https://doi.org/10.3390/bios12080652