Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Journal Archive

Volume 10 (2023)

Best Paper of ICME 2022

Best Paper of ICME 2022

Best Paper of ICME 2022

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)

Most Visited Articles

Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model

Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings

Hydro assisted tube pressing as a new severe plastic deformation method for producing high strength tubes

Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating

An Examination of Environmental and Dimensional Parameters on Force and Critical Time of the Manipulation Process Using the Mechanical Theory of DMT Contact

Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break

Pages 1-15

10.22034/ijme.2023.412811.1822

Mohammad Purhaji; Amir Hosein Hamdollahzade; Mohammad Reza Nakhaei

Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body

Pages 16-28

10.22034/ijme.2023.392262.1770

Fateme Ahmadi; Mohammad Zabihi Gargari; Hamidreza Shahverdi

Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading

Pages 29-39

10.22034/ijme.2023.409379.1813

Majid Elyasi; Meghdad Roohol amini Ahangar; Vahid Modanloo

Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM

Pages 40-52

10.22034/ijme.2023.418523.1845

Farzin Azimpour Shishevan; Hossein Rahimi Asiabaraki; Bahman Rahmatinejad

Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper

Pages 53-64

10.22034/ijme.2023.413891.1824

Davood Afshari; Hasan Modaresinia; Moahmmad Karimi Ivanaki; Mohammad Mahdi Entezarian

Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling

Pages 65-76

10.22034/ijme.2024.416957.1833

Arash Ghasemi; Seyed Mahdi Abbasi; Maryam Morakabati; Adly Akhondzadeh

Publication Information

Director-in-Charge

Gholamhossein Liaghat

Editor-in-Chief

Gholamhossein Liaghat

Editorial Board

Gholamhossein Liaghat Hassan Moslemi Naeini Yousef Hojjat AmirReza Shahani Farhang Honarvar Behrooz Arezoo Mohammad Bakhshi-jooybari Karim Shelesh-nezhad Mahmoud Farzin Behnam Davoodi Sadegh Rahmati

International Editorial Board

Mahmoud Moradi

Frequency

Monthly

Print ISSN

Search

Advanced Search

Indexing and Abstracting

Islamic World Science Citation Center (ISC)

Scientific Information Database (SID)

CIVILICA

magiran

JREF

Keywords Cloud