Iranian Journal of Manufacturing Engineering

Investigation of the energy absorption in three-layer Al/Polypropylene/Steel deep drawn cups

Volume 7, Issue 6, August 2020, Pages 34-43

Ali Nassiri; Amir Atrian

Effect of cutting tool vibration and tool wear on the surface topography of workpiece while machining Ti6Al4V Titanium alloy using laser profilometry

Volume 7, Issue 10, December 2020, Pages 34-45

Mahdi Danesh; Ali Rahimi

Experimental investigation of Buckling after impact strength of grid stiffened composite panels

Volume 7, Issue 11, January 2021, Pages 34-41

ahmad Ataei; Hamed Ahmadi; Amin Farrokhabadi

A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings

Volume 8, Issue 6, August 2021, Pages 34-40

Niromand Jasimi Zindashti; Bharam Afsharmanesh; Afshin Taghvaeipour; Hamed Ghafarirad; Amirhosein Riazi; Kiamehr Oladzad Abbasabadi; Bahram Ilkhani

Prediction of hot deformation behavior of 304 stainless steel using Johnson-Cook equation

Volume 8, Issue 12, March 2022, Pages 34-43

Hamidreza Rezaei Ashtiani; Meysam Mohammadi

Buckling and bending analysis of functional porous plate using shear deformation theory

Volume 9, Issue 8, October 2022, Pages 34-43

10.22034/ijme.2023.370966.1714

mohammad javad khoshgoftar; Mona Hajiveiseh

Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading

Volume 10, Issue 3, May 2023, Pages 34-42

10.22034/ijme.2023.419708.1853

MirMeysam Niksirat; Gholamhosein Rahimi; Shahram Hosseini

Dynamic modeling and decoupled control of linear and angular velocity for robotic fish

Volume 8, Issue 1, March 2021, Pages 35-45

Farnaz Dehkordi; Majid Sadedel

Incorporation of Al2O3 powder for improvement of the mechanical and metallurgical properties of multi-passes friction stir welding of Al 2024

Volume 8, Issue 3, May 2021, Pages 35-46

Majid Farhang; Mohammadreza Farahani; Mohammad Nazari

Investigation of microstructure and hardness of recycled aluminum seamless tube using friction stir consolidation

Volume 8, Issue 11, February 2022, Pages 35-42

Reza َAbdi Behnagh; Rasoul Jabarshayan

Numerical and experimental investigation of the effect of local heating on the reduction of the spring back defect in the flexible roll forming process

Volume 9, Issue 9, November 2022, Pages 35-44

10.22034/ijme.2023.389451.1759

Mehdi Shamshiri; Valiollah Panahizadeh; Yaghoub DadgarAsl

Optimizing the failure analysis of a network structure using artificial neural network and genetic algorithm

Volume 9, Issue 11, January 2023, Pages 35-44

10.22034/ijme.2023.400071.1789

Noushin Ghanadi; Amin Farrokhabadi; Shahram Hosseini

The effect of current intensity and feed rate on surface roughness and fatigue life of work piece in wire electrical discharge turning (WEDT) process

Volume 7, Issue 8, October 2020, Pages 36-44

Hossein Dehestani

Investigating the microstructure variation of commercially pure titanium in hot resistance spinning

Volume 9, Issue 4, July 2022, Pages 36-46

10.22034/ijme.2022.159960

Mohsen Ghafari; Majid Elyasi; Mohammad Javad Mirnia

Determination of the type of anisotropy and stiffness tensor in additive manufacturing polymer components by using ultrasonic waves

Volume 9, Issue 6, September 2022, Pages 36-48

10.22034/ijme.2022.160940

Alireza Bagheri-Bami; Farhang Honarvar

Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores

Volume 10, Issue 7, September 2023, Pages 36-44

10.22034/ijme.2024.434979.1916

Kiana Sadaat Mousavi Jarahi; Yousef Hojjat; Behzad Ghavami Namin

The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts

Volume 10, Issue 8, October 2023, Pages 36-48

10.22034/ijme.2024.434383.1906

Ehsan Amini; Alireza Fathi; Ali-Mohammad Baghestani

Investigating the effect of build orientation on surface roughness and build time using Fused Deposition Modelling

Volume 7, Issue 12, February 2021, Pages 37-53

Mohammad Javad Hooshmand; Saeed Mansour

Fabrication of polylactic acid / polyethylene glycol/ hydroxyapatite nanoparticles nanocomposite foam by mass porosity method

Volume 8, Issue 9, November 2021, Pages 37-49

Arash Goodarzi; Hamzeh Shahrajabian

An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load

Volume 10, Issue 4, June 2023, Pages 37-47

10.22034/ijme.2023.412900.1821

Ali Shirafkan; Gholamhossein Majzoobi; Mohammad Kashfi

Study on the effect of thickness of layers, temperature and speed of nozzle on circularity error and surface roughness of holes in parts produced during fused deposition modeling

Volume 7, Issue 7, September 2020, Pages 38-50

payam saraeian; ehsan shakouri

Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy

Volume 8, Issue 8, October 2021, Pages 38-51

Mohammad Eftekhari; Ghader Faraji; Mostafa Bahrami; Majid Baniassadi

The effect of flexible die support from polymeric foam on the incremental forming of polyethylene sheet

Volume 8, Issue 10, December 2021, Pages 38-48

Masoud Rakhshkhorshid; Seyyed Mohammad Hosseini

Additive manufacturing of nickel-based superalloy gas turbine components

Volume 9, Issue 3, June 2022, Pages 38-45

10.22034/ijme.2022.157668

Ali Mohammad Kolagar

Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming

Volume 10, Issue 1, March 2023, Pages 38-48

10.22034/ijme.2023.420524.1858

Seyed Jalal Hashemi; Farzad Rahmani

Iranian Journal of Manufacturing Engineering

Journal Archive

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)