[1] Saeed N, Ronagh H, and Virk A. Composite repair of pipelines, considering the effect of live pressure-analytical and numerical models with respect to ISO/TS 24817 and ASME PCC-2. Composites Part B: Engineering: 2014;58: 605-610.
doi: 10.1016/j.compositesb.2013.10.035
[2] Vaziri A. and Estekanchi H. Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression. Thin-Walled Structures: 2006; 44(2): 141-151.
doi: 10.1016/j.tws.2006.02.004
[3] Zecheru G. Methods for determining the remaining strength factor of pipelines with volumetric surface defects. Rev Chim: 2015.; 66: 710-717.
[4] Cai J, Jiang X, and Lodewijks G. Residual ultimate strength of offshore metallic pipelines with structural damage a literature review. Ships and Offshore Structures: 2017;12(8):1037-1055.
doi: 10.1080/17445302.2017.1308214
[5] Bjørnøy O, Sigurdsson G, and Cramer E. Residual strength of corroded pipelines, DNV test results. Paper presented at the tenth international offshore and polar engineering conference; Seattle; Washington; USA; May 2000. ISOPE-I-00-140
[6] Abeele F, Galvan B, Ramose P,and Muylle J. Numerical simulation of the interference between trawl gear and offshore pipelines. in proceedings of the sixth international pipeline technology conference; Ostend: Lab. Soete and tiratsoo technical; Clarion teechnical conferences the european pipline research group; 2013.
[7] Ghaednia H, Sreekanta D, Rick W, Richard K. Safe burst strength of a pipeline with dent–crack defect: effect of crack depth and operating pressure. Engineering Failure Analysis; 2015; 55: 288-299.
doi: 10.1016/j.engfailanal.2015.06.005
[8] Karamanos S ,and K Andreadakis. Denting of internally pressurized tubes under lateral loads. International Journal of Mechanical Sciences; 2006; 48(10): 1080-1094.
doi: 10.1016/j.ijmecsci.2006.03.018
[9] Lavigne O, Gamboa E,Castin W, Law M, Luzin V, Linton V. Microstructural and mechanical factors influencing high pH stress corrosion cracking susceptibility of low carbon line pipe steel. Engineering Failure Analysis; 2014; 45: 283-291.
doi: 10.1016/j.engfailanal.2014.07.011
[10] Smiderle J, Juan Manuel P, Sérgio T. Premature failure of superduplex stainless steel pipe by pitting in sea water environment. Engineering Failure Analysis: 2014;46: 134-139.
doi: 10.1016/j.engfailanal.2014.08.001
[11] Abtahi A, and Rahimi M. Analytical and numerical investigation of defective metal reservoirs using composite layering. In: Proceedings of the 29th International Congress of the Iranian Society of Mechanical Engineers and the 8th Symposium on the Industry of Thermal Power Plants. 1400. ISME: Khajeh Nasir Toosi University of Technology; Tehran; Iran.
[12] Piping A, API 5L seamless & welded pipe, A.P.P. stock, Editor. 2015, American Piping: UNITED STATES.
[13] Stress Engineering Services, I., ASME PCC-2 & ISO 24817 Certification Document Armor Plate 360 ZED Repair System. 2017, 13800 Westfair East Drive: Houston, Texas.
doi: 10.1115/IPC2020-9571
[14] Lim K, Azraai S, Yahaya N, Noor N, Zardasti L, Kim J. Behaviour of steel pipelines with composite repairs analysed using experimental and numerical approaches. Thin-Walled Structures: 2019; 139: 321-333.
doi: 10.1016/j.tws.2019.03.023