Iranian Journal of Manufacturing Engineering

Experimental study of energy absorption of sandwich panel with composite/elastomer skin

Volume 10, Issue 10, December 2023, Pages 26-42

10.22034/ijme.2023.418015.1840

Hamid Reza Rezayat; Hossein Toozandehjani; Amir Zakeri

Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061

Volume 10, Issue 7, September 2023, Pages 26-35

10.22034/ijme.2024.434954.1913

Hamed Samimi; Abbas Pak

Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process

Volume 8, Issue 4, June 2021, Pages 27-38

Rasoul Naderli; Mahdi Soltanpour; Parviz Asadi

Strength analysis of long edge freight wagon underframe using finite element method

Volume 10, Issue 4, June 2023, Pages 27-36

10.22034/ijme.2023.419496.1850

Hamid Ghasemi; Iman Delfani

Performance evaluation of self-propelled rotary tool in turning

Volume 10, Issue 8, October 2023, Pages 27-35

10.22034/ijme.2024.435019.1915

Mohammad Azizi Yousefvand; Habibollah Akbari; Behnam Davoodi

Incremental forming of cylindrical aluminum flanges using a new eccentric tool

Volume 7, Issue 8, October 2020, Pages 28-35

Seyed Jalal Hashemi

Effect of machining parameters on heat-affected zone and kerf width in hybrid laser- waterjet process

Volume 8, Issue 10, December 2021, Pages 28-37

Mohammad Saber Asadollahi; Hamid Soleimanimehr; Shahram Etemadi Haghighi

Numerical simulation and of gas turbine nozzle baffle manufacturing by hydroforming method

Volume 9, Issue 10, December 2022, Pages 28-41

10.22034/ijme.2023.386880.1752

Pouria Raissi; Ali Mohammad Kolagar; Mohammad Cheraghzadeh; Mohammad Javad Mirnia

Comparison of experimental and numerical correction factors from seam weld fracture energy by drop weight tear testing of gas transportation pipelines

Volume 9, Issue 3, June 2022, Pages 29-37

10.22034/ijme.2022.157666

Ali Akbar Majidi-Jirandehi; Seyyed Hojjat Hashemi; Sajjad Seifoori

Investigating the Effect of the Number of Passes and Tool Design in the Friction-Stirring Process on the Grain Size, Hardness and Wear Resistance of Ck45 Steel

Volume 9, Issue 7, October 2022, Pages 29-38

10.22034/ijme.2022.163350

Mohammad Javad Marzban; Seyed Ahmad Behgozin; Maziar Janghorban; Ahmad Afsari

Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading

Volume 10, Issue 6, August 2023, Pages 29-39

10.22034/ijme.2023.409379.1813

Majid Elyasi; Meghdad Roohol amini Ahangar; Vahid Modanloo

Minimizing piston mass of Neuman Esser reciprocating compressors using genetic algorithm

Volume 8, Issue 5, July 2021, Pages 30-42

Kamal Alinaghi; Sa'id Golabi

The assessment of energy absorption capability of aluminum/epoxy-glass fibers laminates after exposer to the thermal cycling

Volume 9, Issue 2, May 2022, Pages 30-40

10.22034/ijme.2022.157560

Mohammad Askari; Mehrdad Javadi; Reza Eslami Farsani; Abdolreza Geranmayeh

Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section

Volume 10, Issue 1, March 2023, Pages 30-37

10.22034/ijme.2023.417115.1830

Amir Aghababaei; Mohammad Honarpisheh

Analytical and Numerical Investigation of Machining Forces of Ultrasonic Assisted Milling

Volume 7, Issue 4, June 2020, Pages 31-38

Abbas Pak; Ali Farahani

Determination of stiffness coefficients and buckling strength of composite lattice conical shells using shell fiber path and lattice rib analysis

Volume 8, Issue 7, September 2021, Pages 31-42

Naderi َALI Aghar; Hamed Ahmadi

Investigating the healing-mechanical behavior of glass fibers/epoxy self-healing composites containing microcapsules and silica nanoparticles under the shear loading

Volume 9, Issue 1, April 2022, Pages 31-42

10.22034/ijme.2022.155984

Sadegh Mirzamohammadi; Reza Eslami-Farsani; Hossein Ebrahimnezhad-Khaljiri

Microstructure design of heterogeneous material using multisided patch

Volume 8, Issue 2, April 2021, Pages 32-40

Ali Hasanabadi

Experimental study of two-point incremental forming of St12 sheet using negative dies

Volume 9, Issue 12, February 2023, Pages 32-42

10.22034/ijme.2023.402149.1794

Alireza Hajfathalian; Mohammad Javad Mirnia; Majid Elyasi

Simulation of the forming process and the spring back of the spacer part using the finite element method

Volume 10, Issue 9, November 2023, Pages 32-41

10.22034/ijme.2024.434340.1905

Amir Mahdi Shouri; Seyed Mohammad Hossein Mousavi; Pouria Oliazadeh; Mohammad Hossein Farshidianfar

Synergic effect of flower-like Cu-based metal-organic framework/graphene nanostructures on electrochemical performance of supercapacitors

Volume 7, Issue 2, May 2020, Pages 33-41

Marziyeh Azadfalah; Arman Sedghi; Hadi Hosseini

Using Micro/Nano Scale Contact Models in 3D Manipulation of Deformation of Au Particles Under Angular Effect

Volume 7, Issue 5, July 2020, Pages 33-43

moharam korayem; Moiein Taheri; hesam khaksar; Seyed Hasan Bathaee

The influence of the amount of CaCO3 foaming agent on the physical structure and mechanical properties of LM13 aluminum foam

Volume 9, Issue 5, August 2022, Pages 33-39

10.22034/ijme.2022.160057

Sadegh Soltani; Hamed Deilami Azodi; Seyed Hossein Elahi

Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite

Volume 10, Issue 2, April 2023, Pages 33-40

10.22034/ijme.2023.420947.1861

Alireza Ronaghi; Amirhossein Jabbari Mostahsan; Mohammad Sedighi

Investigating the effect of pin and shoulder rotational speed on the mechanical properties of friction stir processed region in Al6061

Volume 7, Issue 3, June 2020, Pages 34-41

Sayed Hassan Nourbakhsh; Yasin Karbali; Mohammad Solati

Iranian Journal of Manufacturing Engineering

Journal Archive

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)