[1] Fomin O, Gorbunov M, Gerlici J, Vatulia G, Lovska A, Kravchenko K. Research into the strength of an open wagon with double sidewalls filled with aluminum foam. Materials. 2021;14:3420.
doi: 10.3390/ma14123420
[2] Patrascu A I, Hadar A, Pastrama S D. Structural analysis of a freight wagon with composite walls. Materiale Plastice. 2020;57(2):140-151.
doi: 10.37358/MP.20.2.5360
[3] Haraka S S, Sharmaa S C, Harshaa S P. Structural dynamic analysis of freight railway wagon using finite element method. Procedia Materials Science. 2014;6:1891–1898.
doi: 10.1016/ j.mspro .2014.07.221
[4] Fomin O, Lovska A, Bukatova O, Yarenchuk L, Chimshir V. Peculiarities of determining the bearing structure load of the body of articulated open wagon made of round pipes. Materials Science and Engineering. 2019;708:012009.
doi: 10.1088/1757-899X/708/1/012009
[5] Milovanović V, Jovanović N, Bojović M, Jovičić G, Živković M. Strength analysis of the freight wagon for the transport of petroleum. Article in IMK-14 - Istrazivanje i razvoj. 2018.
doi: 10.5937/IMK1801011M
[6] Milovanović V, Živković M, Dišić A, Rakić D, Živković J. Experimental and Numerical Strength Analysis of Wagon for Transporting Bulk Material. IMK-14 – Research & Development. 2014;20(2):61-66.
[7] Milovanović V, Dunić V, Rakić D, Živković M. Identification causes of cracking on the underframe of wagon for containers transportation – Fatigue strength assessment of wagon welded joints. Engineering Failure Analysis. 2013;31:118-131.
doi: 10.1016/j.engfailanal.2013.01.039
[8] Šťastniak P, Kurčík P, Pavlík A. Design of a new railway wagon for international transport with the adaptable loading platform. MATEC Web of Conferences. 2018;235:00030.
doi: 10.1051/matecconf/201823500030
[10] Lovska A O. Computer simulation of wagon body bearing structure dynamics during transportation by train ferry. Eastern-European Journal of Enterprise Technologies. 2015;3:9–14.
doi: 10.15587/1729-4061.2015.43749
[11] Lee H A, Jung S B, Jang H H, Shin D H, Lee J U, Kim K W, Park G J. Structural-optimization-based design process for the body of a railway vehicle made from extruded aluminum panels. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2016;230(4):1283-1296.
doi: 10.1177/0954409715593971
[12] Płaczek M, Wróbel A, Buchacz A. A concept of technology for freight wagons modernization. IOP Conference Series: Materials Science and Engineering; 2016;161:012107.
doi: 10.1088/1757-899X/161/1/012107
[13] Kuczek T, Szachniewicz B. Topology Optimization of Railcar Composite Structure. International Journal of Heavy Vehicle Systems. 2015;22: 375–385.
doi: 10.1504/IJHVS.2015.073206
[14] Fomin O, Lovska A. Improvements in passenger car body for higher stability of train ferry. Engineering Science and Technology, an International Journal. 2020;23:1455–1465.
doi: 10.1016/j.jestch.2020.08.010
[15] EN 12663-2: Railway applications. Structural requirements of railway vehicle bodies. Part 2: Freight wagons. European Committee for Standardization. 2011.
[16] ERRI B12/RP17, No. 8: Programmed of Stresses to be carried out on Wagons with Steel Underframe and Body Structure. European Rail Research Institute.1996.
[17] EN10025-3: Hot rolled products of structural steels. Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels. 2005.
[18] Norton R L. Machine design an integrated approach. Forth ed. Pearson Education, Inc.2011.