[1] Wong CC, Dean TA, Lin J. A review of spinning, shear forming and flow forming processes. ternational Journal of Machine Tools and Manufacture. 2003 Nov; 43(14):1419–35.
doi: 10.1016/S0890-6955(03)00172-X
[2] Liu Y, Wang J, Cheng H, Sun Y. Kinematics Analysis of the Roller Screw Based on the Accuracy of Meshing Point Calculation. Mathematical Problems in Engineering. 2015 Jan; 2015(1):303972.
doi: 10.1155/2015/303972
[3] Podder B, De T, Saikumar S, Kumar KR. Process capability study of flow formed shell diameter. Materials Today: Proceedings. 2018 Jan 1;5(13):27094-9.
doi: 10.1016/j.matpr.2018.09.015
[4] Runge M. Spinning and flow forming: spinning and flow forming technology, product design, equipment, control systems. Verlag Moderne Industrie; 1994.
[5] Klocke F, Brummer CM. Laser-assisted metal spinning of challenging materials. Procedia Engineering. 2014 Jan 1;81:2385-90.
doi: 10.1016/j.proeng.2014.10.338
[6] Khodadadi M, Khalili K, Ashrafi A. Optimizing parameters effective on built-up edge in internal gear flowforming process. Sādhanā. 2022 Jun;47(2):99.
doi: 10.1007/s12046-022-01860-z
[7] Khodadadi M, Khalili K, Ashrafi A. Single-and multi-objective optimization of internal gear flowforming process based on increasing tooth height and reducing force and built-up edge. Transactions of the Canadian Society for Mechanical Engineering. 2022 Oct 28;47(1):43-53.
doi: 10.1139/tcsme-2022-0073
[8] Zixuan LI, Rezaei S, Tao WA, Jianchao HA, Xuedao SH, Pater Z, Huang Q. Recent advances and trends in roll bonding process and bonding model: A review.
Chinese Journal of Aeronautics. 2023 Apr; 36(4):36–74.
doi: 10.1016/j.cja.2022.07.004
[9] Zhang Z, Xu W, Shan D. An analytical model on spin-bonding of composite tube. Procedia Engineering. 2014 Jan 1;81:2024-9.
doi: 10.1016/j.proeng.2014.10.275
[10] Mohebbi MS, Akbarzadeh A. Fabrication of copper/aluminum composite tubes by spin-bonding process: experiments and modeling. The International Journal of Advanced Manufacturing Technology. 2011 Jun;54:1043-55.
doi: 10.1007/s00170-010-3016-5
[11] Jiang S, Ren Z, Li C, Xue K. Role of ball size in backward ball spinning of thin-walled tubular part with longitudinal inner ribs. Journal of Material Processing Technology. 2009 Feb 19; 209(4):2167–2174.
doi: 10.1016/j.jmatprotec.2008.05.006
[12] Hong SI, Rhee SH, Yun SJ. A Study on the Neck-in Process by Flow-forming. Metals and Materials. 1998 Aug;4:895-8.
doi: 10.1007/BF03026419
[13] Jiang SY, Ren ZY, Bin WU, Wu GX. General issues of FEM in backward ball spinning of thin-walled tubular part with longitudinal inner ribs. Transactions of Nonferrous Metals Society of China. 2007 Aug 1;17(4):793-8.
doi: 10.1016/S1003-6326(07)60176-9
[14] Guo X, Yu Y, Tao J, Wang H, El-Aty AA, Wang C, Luo X, Kim N. Maximum residual contact stress in spinning process of SS304/20 bimetallic pipe. The International Journal of Advanced Manufacturing Technology. 2020 Feb;106:2971-82.
doi: 10.1007/s00170-019-04774-z
[15] Rezaei Ashtiani H, Ahari A. Fabrication of two layer Al/Cu rods using hot forward extrusion. Iranian Journal of Manufacturing Engineering, 2019 Sep; 6(4): 7-13. [In Persian]
[16] Afshari H, Ashrafi A. Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube. Iranian Journal of Manufacturing Engineering. 2023 May 22;10(3):18-33.
doi: 10.22034/ijme.2023.424349.1873 [In Persian]
[17] Fatemeh B, Elyasi M, Mohammad JM, Rohollah J. The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process. Iranian Journal of Manufacturing Engineering. 2020 Jan 21;6(8):1-9. [In Persian]
