[1] Salamat-Talab M, Tahmasbi V, Safari M, Zeinolabedin Beygi A. Mathematical modeling, sobol sensitivity analysis and optimization of main parameters in drilling of E-glass/epoxy laminated composites. Iranian Journal of Manufacturing Engineering. 2022 Feb 19;8(11):43-53. [In Persain]
[2] Zeinolabedin Beygi A, Salamat-talab M, Farrokhabadi A, Moslemi Naeini H. Experimental investigation of the effect of natural microfibers on the mode I fracture toughness of plain-woven laminated composites. Modares Mechanical Engineering. 2022 Jan 10;22(2):71-9. [In Persain]
[3] Bajpai PK, Singh I, Madaan J. Development and characterization of PLA-based green composites: A review. Journal of Thermoplastic Composite Materials. 2014 Jan;27(1):52-81.
doi: 10.1177/0892705712439571
[4] Shekar HS, Ramachandra MJ. Green composites: a review. Materials Today: Proceedings. 2018 Jan 1;5(1):2518-26.
doi: 10.1016/j.matpr.2017.11.034
[5] Akil H, Zamri MH, Osman MR. The use of kenaf fibers as reinforcements in composites. InBiofiber reinforcements in composite materials 2015 Jan 1 (pp. 138-161). Woodhead Publishing.
doi: 10.1533/9781782421276.1.138
[6] Aziz SH, Ansell MP. The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1–polyester resin matrix. Composites science and technology. 2004 Jul 1;64(9):1219-30.
doi: 10.1016/j.compscitech.2003.10.001
[7] Nikfar N, Esfandiar M, Shahnazari MR, Mojtahedi N, Zare Y. The reinforcing and characteristics of interphase as the polymer chains adsorbed on the nanoparticles in polymer nanocomposites. Colloid and Polymer Science. 2017 Oct;295:2001-10.
doi: 10.1007/s00396-017-4164-z
[8] Shahnazari MR, Esfandiar M. Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium. Mechanics of Advanced Composite Structures. 2018 Apr 1;5(1):83-90.
doi: 10.22075/MACS.2017.1558.1074
[9] Azimpour Shishevan F, Rahimi Asiabaraki H, Rahmatinejad B. Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM. Iranian Journal of Manufacturing Engineering. 2023 Aug 23;10(6):40-52.
doi: 10.22034/IJME.2023.418523.1845 [In Persian]
[10] Yousif BF, Shalwan A, Chin CW, Ming KC. Flexural properties of treated and untreated kenaf/epoxy composites. Materials & Design. 2012 Sep 1;40:378-85.
doi: 10.1016/j.matdes.2012.04.017
[11] Sarkhosh R, Zarei H. Design, Manufacturing and mechanical and electrical properties evaluation of glass fiber reinforced PTFE polymer matrix composites. Modares Mechanical Engineering. 2021 Jan 10;21(2):117-27. [In Persain]
[12] Manral A, Bajpai PK. Static and dynamic mechanical analysis of geometrically different kenaf/PLA green composite laminates. Polymer Composites. 2020 Feb;41(2):691-706.
doi: 10.1002/pc.25399
[13] Mann GS, Singh LP, Kumar P, Singh S. Green composites: A review of processing technologies and recent applications. Journal of thermoplastic composite materials. 2020 Aug;33(8):1145-71.
doi: 10.1177/0892705718816354
[14] Ahmad Nadzri SN, Hameed Sultan MT, Md Shah AU, Safri SN, Basri AA. A review on the kenaf/glass hybrid composites with limitations on mechanical and low velocity impact properties. Polymers. 2020 Jun 4;12(6):1285.
doi: 10.3390/polym12061285
[15] Beigpour R, Shokrollahi H, Khalili SM. Experimental and numerical analysis of a biodegradable hybrid composite under tensile and three-point bending tests. Composite Structures. 2021 Oct 1;273:114255.
doi: 10.1016/j.compstruct.2021.114255
[16] Malik K, Ahmad F, Gunister E. A review on the kenaf fiber reinforced thermoset composites. Applied Composite Materials. 2021 Apr;28(2):491-528.
doi: 10.1007/s10443-021-09871-5
[17] Setyayunita T, Widyorini R, Marsoem SN, Irawati D. Study on the characteristics of NaCl treated kenaf fiber epoxy composite board. InIOP Conference Series: Earth and Environmental Science 2021 Nov 1 (Vol. 891, No. 1, p. 012006). IOP Publishing.
doi: 10.1088/1755-1315/891/1/012006
