Optimization of the Lorentz force in an electromagnetic pump by the surface response method with numerical solution of Maxwell equations in three dimensions and comparison with experimental results

Volume 8, Issue 9, November 2021, Pages 14-22

vahid rezaee; mohammad hossein sadeghi; seyed peyman hashemi

• View Article
• PDF 828.58 K

Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber

Volume 10, Issue 2, April 2023, Pages 14-21

10.22034/ijme.2023.418064.1848

Vahid Moradzadeh; Mahdi Danesh; Fatemeh Arabgol

• View Article
• PDF 602.13 K

Investigating the effect of different variables to reduce delamination due to drilling in composite laminates

Volume 8, Issue 6, August 2021, Pages 15-20

Hadi Ghesmati-Kucheki; Mahnaz Zakeri; M. R. Ayatollahi

• View Article
• PDF 552.9 K

Effect of temperature-dependent physical properties on finite element modeling of laser welding of titanium alloy

Volume 8, Issue 10, December 2021, Pages 16-27

Farid Vakili Tahami; Hamed Halimi Khosroshahi; Ebrahim Safari

• View Article
• PDF 3.76 M

Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel

Volume 8, Issue 11, February 2022, Pages 16-34

Hamid Reza Shahverdi; Amirsalar Dehghani; Mohammad Zabihi Gargari; Mohammad Emami

• View Article
• PDF 1.77 M

Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body

Volume 10, Issue 6, August 2023, Pages 16-28

10.22034/ijme.2023.392262.1770

Fateme Ahmadi; Mohammad Zabihi Gargari; Hamidreza Shahverdi

• View Article
• PDF 1.35 M

Investigation of Corrosion of Aluminum – Brass Alloy in Desalination Plant of South Pars Gas Complex

Volume 7, Issue 2, May 2020, Pages 17-25

Behroz Afshari Bahman Biglo; Esmaeil Jafari

• View Article
• PDF 601.35 K

Vibration analysis of the wire tool in wire-cut EDM

Volume 10, Issue 4, June 2023, Pages 17-26

10.22034/ijme.2023.401485.1795

Vahid Zare; Abbas Mazidi; Ghasem Amirian

• View Article
• PDF 337.85 K

Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method

Volume 10, Issue 7, September 2023, Pages 17-25

10.22034/ijme.2024.435811.1919

Sara Esfandiari Ghollezu; Mohammad Hossein Farshidianfar; Sina Nejati Eghteda

• View Article
• PDF 527.13 K

The effects of surface preparation and curing procedures on load carrying capacity and fatigue life of adhesively bonded lap joints

Volume 7, Issue 6, August 2020, Pages 18-32

Pedram Zamani; Abdolrahman Jaamialahmadi

• View Article
• PDF 1.74 M

Experimental Investigation on Micro Friction Stir Welding of Al-Cu

Volume 9, Issue 2, May 2022, Pages 18-29

10.22034/ijme.2022.157559

Ali Mahdianikhotbesara; Mohammadjafar Hadad

• View Article
• PDF 1009.47 K

Nondestructive measurement of residual stress in welded steel parts using digital image correlation method

Volume 9, Issue 3, June 2022, Pages 18-28

10.22034/ijme.2022.157665

Peyman Ghasemi Tamami; Davood Akbari

• View Article
• PDF 814.21 K

Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube

Volume 10, Issue 3, May 2023, Pages 18-33

10.22034/ijme.2023.424349.1873

Hossein Afshari; Amir Ashrafi

• View Article
• PDF 989.52 K

Development of a new process for the severe plastic deformation of AA 1050 to improve the mechanical properties

Volume 7, Issue 4, June 2020, Pages 19-29

Behzad Akbarzadeh; Hamid Gorji; Mohammad Bakhshi; Rooholla jamaati; Mohammad javad Mirnia

• View Article
• PDF 1.18 M

Effect of periodic variations of wing’s angle of attack on flapping lift force with variable wing geometry

Volume 7, Issue 8, October 2020, Pages 19-27

Mohamad Ali Salimi; Shahram Etemadi Haghighi; Ayat Ghareghani

• View Article
• PDF 961.85 K

An experimental investigation on mechanical properties of 3D-printed bio-inspired sandwich panels based on silk cocoon geometry

Volume 8, Issue 4, June 2021, Pages 19-26

Mostafa Hosseini Vajari; Morteza Behzadnasab

• View Article
• PDF 893.14 K

Experimental and theoretical study on effects of magnetic field and mechanical stress on structural coefficients and magnetomechanical behavior of terfenol-D

Volume 9, Issue 1, April 2022, Pages 19-30

10.22034/ijme.2022.155983

Soheil Talebian

• View Article
• PDF 1.11 M

Investigating the behavior of axial force and temperature in the drilling process of glass/epoxy composites with and without curvature

Volume 9, Issue 12, February 2023, Pages 19-31

10.22034/ijme.2023.400730.1792

Arman Taheri; Mazaher Salamat-talab; Vahid Tahmasbi

• View Article
• PDF 683.26 K

Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method

Volume 10, Issue 5, July 2023, Pages 19-43

10.22034/ijme.2023.399399.1801

Kamyab Ali Askari; Shahram Etemadi haghighi; Adel Maghsoudpour

• View Article
• PDF 1.51 M

Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM

Volume 10, Issue 9, November 2023, Pages 19-31

10.22034/ijme.2024.433219.1894

Amir Abdollahi; Saeid Amini; Mohammad Hadi Gholami

• View Article
• PDF 1.19 M

Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings

Volume 8, Issue 3, May 2021, Pages 20-34

Mohsen Ghadyani; Vali Enjilela

• View Article
• PDF 1023.75 K

Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test

Volume 8, Issue 7, September 2021, Pages 20-30

Majid Nouri Kamari; Faramarz Ashenai Ghasemi; Gholam Hossein Rahimi Sherbaf; Kazem Reza Kashyzadeh

• View Article
• PDF 907.32 K

Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet

Volume 10, Issue 1, March 2023, Pages 20-29

10.22034/ijme.2023.417116.1831

Ali Zahedi Dizajyekan; Mohammad Javad Mirnia; Bijan Mollaei Dariani

• View Article
• PDF 2.14 M

Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method

Volume 10, Issue 8, October 2023, Pages 20-26

10.22034/ijme.2024.434030.1899

Arya Kazemzadeh; Ghader Faraji

• View Article
• PDF 705.07 K

Fractal-based analysis of the influence of current intensity on surface hardness and surface roughness of Steel workpiece in Electrical Discharge process

Volume 7, Issue 11, January 2021, Pages 21-33

Iman Mahmoudinia; Hamid Soleimanimehr; Adel maghsoudpour; Shahram Etemadi Haghighi

• View Article
• PDF 2.3 M