Investigating electrical resistance and thermal analysis of hot spinning of titanium using resistance method

Articles in Press, Accepted Manuscript, Available Online from 06 January 2024

10.22034/ijme.2024.411268.1814

mohsen ghafari; Majid Elyasi; Mohammad Javad Mirnia

• View Article

Experimental investigation of electroplastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test

Articles in Press, Accepted Manuscript, Available Online from 18 January 2024

10.22034/ijme.2024.432255.1890

Seyed Hossein Eslami; Hamid Gorji; Mohammad Bakhshi-Jooybari; Amirhesam Farkhondeh

• View Article

Experimental feasibility study of forming copper sheets by vacuum forming method

Articles in Press, Accepted Manuscript, Available Online from 19 January 2024

10.22034/ijme.2024.432653.1892

Mohsen Khadem; Seyed Jalal Hemmati

• View Article

Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method

Articles in Press, Accepted Manuscript, Available Online from 05 February 2024

10.22034/ijme.2024.434030.1899

Arya Kazemzadeh; Ghader Faraji

• View Article

Experimental study of the effects of constrained groove pressing process on AA6061 sheet

Articles in Press, Accepted Manuscript, Available Online from 13 February 2024

10.22034/ijme.2024.433980.1895

Moein Gholami; Seyyed Ehsan Eftekhari; Masoud Rakhshkhorshid

• View Article

Simulation of the forming process and the springback of the spacer part using the finite element method

Articles in Press, Accepted Manuscript, Available Online from 18 February 2024

10.22034/ijme.2024.434340.1905

Amir Mahdi Shouri; Seyed Mohammad Hossein Mousavi; Pouria Oliazadeh; Mohammad Hossein Farshidianfar

• View Article

Production of aluminum-based composites from recycled chips by hot extrusion processing

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.432303.1889

Hamidreza Rezaei Ashtiani; Hossein Ehsani

• View Article

The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.434812.1912

Hossein Eidi; Iman Zohourkari

• View Article

An investigation of residual stress distribution in friction drilling of AA-7075 sheets by finite element modeling

Articles in Press, Accepted Manuscript, Available Online from 04 May 2024

10.22034/ijme.2024.436544.1920

Alireza Bagheri bami; Mohammad Honarpisheh

• View Article

Construction of constitutive equations, modified dynamic materials model and strain-rate sensitivity coefficient map for investigation of hot and warm working instability of 2205 duplex stainless steel

Volume 8, Issue 12, March 2022, Pages 1-10

Ali Sonboli; Fardin Nematzadeh; Ali Mojgani; Alireza Nouri

• View Article
• PDF 988.97 K

Prediction of hot deformation behavior of 304 stainless steel using Johnson-Cook equation

Volume 8, Issue 12, March 2022, Pages 34-43

Hamidreza Rezaei Ashtiani; Meysam Mohammadi

• View Article
• PDF 928.68 K

The effect of flexible die support from polymeric foam on the incremental forming of polyethylene sheet

Volume 8, Issue 10, December 2021, Pages 38-48

Masoud Rakhshkhorshid; Seyyed Mohammad Hosseini

• View Article
• PDF 4.19 M

Microstructural Studies and Mechanical Properties of Hydroforming Process of AZ31B Magnesium and AA 2024 Aluminum Alloys Sheets at Elevated Temperatures

Volume 8, Issue 10, December 2021, Pages 39-48

Faramarz Fereshteh-saniee; Saeed Yaghoubi; Sadegh Ghorbanhosseini

• View Article
• PDF 687.71 K

Selection of Appropriate Ductile Fracture Criterion to Predict Failure of Folded Cross Section Profiles in Reshaping Process

Volume 8, Issue 8, October 2021, Pages 24-37

Maziar Zohrabi; Siamak Mazdak; Hossein Talebi-Ghadikolaee

• View Article
• PDF 1.52 M

Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy

Volume 8, Issue 8, October 2021, Pages 38-51

Mohammad Eftekhari; Ghader Faraji; Mostafa Bahrami; Majid Baniassadi

• View Article
• PDF 1.49 M

Investigation of the Effect of Backpressure and Friction on Material Flow in the Twist Extrusion Process of 6063 Aluminum Alloy

Volume 8, Issue 6, August 2021, Pages 1-6

Seyed hassan Jahantab; Abdolvahed Kami

• View Article
• PDF 708.25 K

Investigating the effect of nonlinear strain path on the mechanical properties of sheet metal to predict burst pressure of composite Rupture disc

Volume 8, Issue 4, June 2021, Pages 1-11

Morteza Mohebbi; mohammad hoseinpour

• View Article
• PDF 1.34 M

Experimental study on stamping of metal/composite laminates reinforced with glass fibers and nanoclay particles

Volume 8, Issue 2, April 2021, Pages 1-10

Farzad Boroumand; S. M. Hossein Seyedkashi; Mohammad Hossein Pol

• View Article
• PDF 744.1 K

Investigation of production process parameters effects on the mechanical properties of Thermex rebar by Taguchi method

Volume 8, Issue 2, April 2021, Pages 41-51

Vahid Pouyafar; Ramin Meshkabadi

• View Article
• PDF 1.68 M

Automation of sheet metal positioning in stamping die design

Volume 8, Issue 1, March 2021, Pages 55-67

Ghasem Azamirad; Behrooz Arezoo

• View Article
• PDF 865.38 K

Experimental and numerical study on the distribution of thickness and dimensional accuracy of AA 6061 in two-point incremental forming using flexible die

Volume 7, Issue 11, January 2021, Pages 9-20

Mohammad Soleimanifar; Majid Elyasi

• View Article
• PDF 805.29 K

Experimental and numerical investigation of laser bending of tailor machined blanks with different bending mechanisms

Volume 7, Issue 11, January 2021, Pages 52-65

Mehdi Safari; Mahmoud Farzin

• View Article
• PDF 868.72 K

Effect of Electroforming Process Parameters with One-way Pulse Current and Reverse Pulse Current (PRC) on Mechanical Properties and Thickness Uniformity of Produced Copper U-shaped

Volume 7, Issue 10, December 2020, Pages 61-72

Iman Mohammadi Arani; Hamid Montazerolghaem

• View Article
• PDF 1.14 M

Incremental forming of cylindrical aluminum flanges using a new eccentric tool

Volume 7, Issue 8, October 2020, Pages 28-35

Seyed Jalal Hashemi

• View Article
• PDF 895.41 K

Investigation of the energy absorption in three-layer Al/Polypropylene/Steel deep drawn cups

Volume 7, Issue 6, August 2020, Pages 34-43

Ali Nassiri; Amir Atrian

• View Article
• PDF 826.46 K