Number of Articles: 435
Assessment of using the floating bobbin tool for double sided friction stir welding of aluminium

Volume 7, Issue 3, June 2020, Pages 52-62

Mohammad Ali Naziri; Amin Rabiezadeh

Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel

Volume 8, Issue 2, April 2021, Pages 52-64

Seyed Mohammad Ebrahimi; Mohammadjafar Hadad; Alireza Araee; Seyed Hamid Ebrahimi

Improving the wear and microstructural properties of piston alloys using ZrO2 reinforcing particles

Volume 9, Issue 2, May 2022, Pages 52-59

10.22034/ijme.2022.157562

Hossein Rahimi Asiabaraki; Mostafa Akbari; Parviz Asadi

Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper

Volume 10, Issue 6, August 2023, Pages 53-64

10.22034/ijme.2023.413891.1824

Davood Afshari; Hasan Modaresinia; Moahmmad Karimi Ivanaki; Mohammad Mahdi Entezarian

Topology Optimization Of Structures With Thermal And Mechanical Loading

Volume 7, Issue 12, February 2021, Pages 54-63

sorush Mojiri; Ali Reza Shafiei

Analytical investigation of influence of rotational speed and feed rate on temperature elevation in jawbone drilling

Volume 9, Issue 1, April 2022, Pages 54-62

10.22034/ijme.2022.155986

Mohammad Meghdad Fallah; Masoud Mohamadi; Mohammadmorad Sheikhi; Ehsan Shakouri; Valiollah panahizadeh

Intelligent modeling of cutting force in bone micromilling process by fuzzy logic

Volume 9, Issue 12, February 2023, Pages 54-62

10.22034/ijme.2023.407192.1809

Vahid Tahmasbi; Amir Hossein Rabiee; Reza Qasemi; Mahdi Qasemi

High energy absorbent Polyester/Natural Kenaf based polymer micro-composites

Volume 10, Issue 3, May 2023, Pages 54-61

10.22034/ijme.2023.420948.1860

Mehdi Karevan; Mohammad Zeinali; Hadis Abbasi Dareh Bidi

Automation of sheet metal positioning in stamping die design

Volume 8, Issue 1, March 2021, Pages 55-67

Ghasem Azamirad; Behrooz Arezoo

Composite fabrication and surface reinforcement of aluminum 7075 by pumice micro and nanoparticles using the friction stir process (FSP)

Volume 7, Issue 5, July 2020, Pages 56-63

Rashid Tohidi Manesh; Mehdi Ghobeiti Hasab; Ali Heidary Moghadam

The study of forming of steel cups using hydrodynamic deep drawing process

Volume 9, Issue 8, October 2022, Pages 56-64

10.22034/ijme.2023.385634.1748

Vahid Modanloo; Behnam Akhoundi; Ahmad Mashayekhi; Hossein Talebi-Ghadikolaee; Ali Zeinolabedin Beygi

Experimental and numerical investigation of laser shock peening effects on residual stresses and fatigue life in hollow plate

Volume 8, Issue 3, May 2021, Pages 59-67

Mahnoush Alinaghian; Saeid Golabi; Mohsen Irani Rahaghi

Iranian Journal of Manufacturing Engineering

Journal Archive