Iranian Journal of Manufacturing Engineering

Articles in Press: ALL Accepted Manuscript Corrected Proof

The effect of drill geometrical properties on delamination and diameter error of holes in a thin sheet of Kevlar/epoxy composite

Volume 5, Issue 2, November and December 2018, Pages 9-17

Dariush Baharlooey

مدلسازی سه گانه و مطالعه هندسی فوم حفره بسته فلزی با توزیع تصادفی تخلخل

Volume 3, Issue 1, September 2016, Pages 10-20

Study the effect of the force during the sub resonant vibrations on mechanical properties and microstructure of low carbon steel GMAW weldment

Volume 4, Issue 1, September 2017, Pages 10-14

Quantitative study of forces in boring process and a new ‎method for tool-tip force

Volume 4, Issue 2, March 2018, Pages 10-23

maryam khalili; Mansour Rafeeyan; Mohammad Mehdi Abootorabi

Investigation the interface and charpy impact behavior of fiber metal laminates containing graphene nanoplatelets and glass\ kevlar hybrid fibers

Volume 6, Issue 2, May and June 2019, Pages 10-19

Seyyed Navid Hosseini Abbandanak; Mehdi Abdollahi Azghan

Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming

Volume 6, Issue 8, January 2020, Pages 10-20

Masoud Mahmoodi; Mohammad Karkeabadi; Ramezanali Hajighorbani

طراحی و شبیه سازی یک آرایه تشکیل شده از ترانسدیوسر های تانپیلز با وجود مواد پوشش دهنده محافظ

Volume 2, Issue 4, September 2016, Pages 11-19

ارزیابی ترک های زیرسطحی در مواد مرکب زمینه پلیمری با استفاده از روش تداخل سنجی لیزری

Volume 2, Issue 3, September 2016, Pages 11-23

The effect of process parameters on thinning defect in the cold roll forming process of channel section

Volume 3, Issue 2, July 2017, Pages 11-18

Effect of friction stir processing with different pass numbers on the mechanical, tribological and corrosion properties of Al6061

Volume 5, Issue 3, November and December 2018, Pages 12-21

hamed aghamohammadi; rasoul jamshidi; Akbar Heidarpour; yoosef mazaheri; mehrdad nemati

Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating

Volume 6, Issue 1, May and June 2019, Pages 12-23

Mansour sadeghinasab; MohammadReza Khanzadeh Gharahshiran; Abbas Saadat

Investigation of tool and workpiece clamping effect on stability lobes in milling process

Volume 6, Issue 6, November 2019, Pages 12-24

Mohammad Rassol Safari; Mohammad Mahdi Jalili; Mohammad Mahdi Abootorabi

Investigation of forming limit of multi-layered composite processed by roll bonding method

Volume 6, Issue 7, December 2019, Pages 12-23

davood rahmatabadi; moslem tayyebi; behnam nourmohammadi khiarak; ramin hashemi

Investigation of Galling wear on stamping dies due to work with advances high strength steel sheets

Volume 3, Issue 3, February 2017, Pages 13-19

Optimization of friction stir spot welding process parameters to achieve maximum failure load

Volume 5, Issue 1, June 2018, Pages 13-27

Amir Hossein Sakhaie; mohammad kazemi nasrabadi; Abdolhossein Jalali Aghchai; Abozar Barimani Varandi

Experimental determination of position effect on mechanical and metallurgical properties of HSLA multi-pass girth weld at natural gas pipelines

Volume 5, Issue 4, March and April 2019, Pages 13-25

Majid Sabokrouh; alireza ajolo

Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives

Volume 6, Issue 5, September 2019, Pages 13-17

mohammad dashti germi; zahra hamidzadeh mahaseni; zohre ahmadi; mehdi shahedi asl

Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process

Volume 6, Issue 9, March 2020, Pages 13-24

Javad Eisaabadi Bozcheloei; M. Sedighi; Ramin hashemi

Experimental investigation and ANN prediction of Al-SiC nano-composite properties produced using dynamic compaction method

Volume 7, Issue 1, March 2020, Pages 13-25

Nasir Namazi; Majid Alitovoli; Hashem Babaei

Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube

Volume 6, Issue 4, September 2019, Pages 14-22

Ali Tajyar

Experimental study of the effect of cryogenic cycling and metal surface treatment on flexural properties of aluminum- epoxy/basalt fibers laminate composite

Volume 4, Issue 1, September 2017, Pages 15-24

Mehdi Abdollahi Azghan; Fardin Asghari Arpatappeh; Reza Eslami-Farsani

مقایسه تحلیلی و تجربی حرکت خط جوش در فرایند کشش عمیق لوح های ترکیبی توسط ورق گیر یک تکه و دوتکه

Volume 2, Issue 2, September 2016, Pages 18-25

Experiment study of tensile behavior of self-healing polymer composite under heating cycles

Volume 5, Issue 2, November and December 2018, Pages 18-25

Seyed Mohammad Reza Khalili; Mohsen Zarei; Reza Eslami-Farsani; Mohammad Reza Zamani

Experimental investigation of explosive forming of aluminum tubes using gas mixture

Volume 6, Issue 5, September 2019, Pages 18-24

Seyed Jalal Hashemi; Amrollah Sadeh

Improvement in mechanical properties of 2024 Al alloy through combination of heat treatment and cold rolling

Volume 3, Issue 2, July 2017, Pages 19-25

Iranian Journal of Manufacturing Engineering

Journal Archive

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)