Iranian Journal of Manufacturing Engineering

S

• Samples with variable cross section Experimental study of residual stress in parts with variable cross section in selective laser melting process [Volume 9, Issue 2, 2022, Pages 8-17]
• Sand Classification Dimensional control of sand particles based on the Iranian National Standard Organization using image processing technique [Volume 5, Issue 3, 2018, Pages 52-62]
• Sand Core Investigation on dimensional and geometrical accuracy of the 3D printed intake sand core of TU5+ new engine cylinder head [Volume 11, Issue 5, 2024, Pages 1-12]
• Sand Grains Dimensional control of sand particles based on the Iranian National Standard Organization using image processing technique [Volume 5, Issue 3, 2018, Pages 52-62]
• Sandwich Panel Experimental Investigation of Aluminum Foam Sandwich Panels under Quasi-static Loading [Volume 7, Issue 7, 2020, Pages 14-23]
• Sandwich Panel Investigating the mechanical behavior of the infinity structure inspired by the silkworm cocoon and comparing it with the rod structure for use in architectural cellular structures [Volume 9, Issue 6, 2022, Pages 11-23]
• Sandwich Panel Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
• Sandwich Panel Investigating the energy absorption of sandwich panel with aluminum core and skin under Quasi-static loading: A numerical and experimental study [Volume 11, Issue 1, 2024, Pages 61-75]
• Sandwich Panel Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
• Sandwich Panel Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
• Sandwich panels Investigation of the energy absorption in three-layer Al/Polypropylene/Steel deep drawn cups [Volume 7, Issue 6, 2020, Pages 34-43]
• Saturated Permeability Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
• Scaffold Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
• Scanning Depth of Field Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2019, Pages 37-44]
• Schwarz P structure Investigating the energy absorption quality of the porous Schwarz P structure made by 3D printing method [Volume 9, Issue 11, 2022, Pages 13-20]
• Sculptured Surface Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
• Seamless tube Investigation of microstructure and hardness of recycled aluminum seamless tube using friction stir consolidation [Volume 8, Issue 11, 2021, Pages 35-42]
• Second phase Investigation of the effect of different parameters on force in the second phase of two-dimensional nanomanipulation [Volume 8, Issue 2, 2021, Pages 23-31]
• Second phase Investigation of different geometry of gold nanoparticles in the displacement of the second phase of three-dimensional manipulation using an AFM [Volume 9, Issue 8, 2022, Pages 1-11]
• Selective Laser Melting Process (SLM) Experimental study of residual stress in parts with variable cross section in selective laser melting process [Volume 9, Issue 2, 2022, Pages 8-17]
• Selective Laser sintering Optimized thermal gradient by changing temperature parameters for laser-assisted additive manufacturing process based on polyamide-12 powder using numerical model [Volume 5, Issue 4, 2018, Pages 26-36]
• Self-healing Investigating the healing-mechanical behavior of glass fibers/epoxy self-healing composites containing microcapsules and silica nanoparticles under the shear loading [Volume 9, Issue 1, 2022, Pages 31-42]
• Self-healing phenomenon Experiment study of tensile behavior of self-healing polymer composite under heating cycles [Volume 5, Issue 2, 2018, Pages 18-25]
• Self-propelled Rotary Tool Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
• SEM Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2019, Pages 13-24]
• Semi-biodegradable composite Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
• Sensitivity analysis Investigating machining factors of recovery powder metallurgy parts, from filings and sintered by Design of experiments in conjunction with sensitivity analysis [Volume 7, Issue 7, 2020, Pages 24-37]
• Sensitivity analysis An Examination of Environmental and Dimensional Parameters on Force and Critical Time of the Manipulation Process Using the Mechanical Theory of DMT Contact [Volume 7, Issue 9, 2020, Pages 1-9]
• Sensitivity analysis Investigation of effects of the temperature and adding nano-SiO2-particles on high-temperature mechanical properties for the piston aluminum-silicon alloy [Volume 8, Issue 3, 2021, Pages 47-58]
• Sensitivity analysis Experimental study and sobol sensitivity analysis in optimizing the effective parameters of dry turning process of aluminum alloy 6061-T6 [Volume 8, Issue 8, 2021, Pages 12-23]
• Sensitivity analysis Temperature and surface quality investigation in orthogonal machining of cortical bone using response surface method and sensitivity analysis [Volume 11, Issue 12, 2024, Pages 64-78]
• Sensor Design and Fabrication of a Contactless Hybrid Static Magnetostrictive Force-Torque Sensor Using Galfenol [Volume 8, Issue 9, 2021, Pages 50-59]
• Separation Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2023, Pages 13-27]
• Separation Efficiency Design and construction of advanced sorting inorder to chromite segregation [Volume 9, Issue 3, 2022, Pages 11-17]
• Severe plastic deformation Texture evolution of 409 ferritic stainless steel tubes through severe plastic deformation and subsequent annealing [Volume 7, Issue 2, 2020, Pages 42-48]
• Severe plastic deformation Numerical and experimented study of UFG pure copper with high strength processed by Accumulative compound extrusion (ACE) [Volume 7, Issue 3, 2020, Pages 42-51]
• Severe plastic deformation Development of a new process for the severe plastic deformation of AA 1050 to improve the mechanical properties [Volume 7, Issue 4, 2020, Pages 19-29]
• Severe plastic deformation Hydro assisted tube pressing as a new severe plastic deformation method for producing high strength tubes [Volume 7, Issue 5, 2020, Pages 1-13]
• Severe plastic deformation Investigation of the Effect of Backpressure and Friction on Material Flow in the Twist Extrusion Process of 6063 Aluminum Alloy [Volume 8, Issue 6, 2021, Pages 1-6]
• Severe plastic deformation Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy [Volume 8, Issue 8, 2021, Pages 38-51]
• Severe plastic deformation Microstructure and mechanical properties of AA 2024/AA 7072/AA 2024 multilayer composites prepared by accumulative roll bonding [Volume 11, Issue 4, 2024, Pages 72-86]
• Severe plastic deformation Design and manufacture of Cyclic Expansion Extrusion (CEE) die and investigation of microstructure and strength of aluminum 1050 under the process [Volume 11, Issue 6, 2024, Pages 42-53]
• Shape memory The Effect of Fabrication Method and Hard-phase Properties on the Thermo-viscoelastic Performance of Polyurethane-based Shape Memory Polymer Used in Medical Scaffolds [Volume 5, Issue 3, 2018, Pages 32-43]
• Shape memory Effect of Infill Percentage and Raster Angle in Fused Deposition Modeling (FDM) Process on Shape Memory Properties of Poly (lactic acid) and Comparison with Compression Molding [Volume 7, Issue 5, 2020, Pages 14-23]
• Shape memory alloys Design and implementation of a 2DOF human finger using shape memory alloys with computer-based online force control [Volume 5, Issue 4, 2018, Pages 44-55]
• Shape memory alloy stent Computational evaluation of the effect of geometric parameters on the mechanical performance of shape memory alloy stents for use in the breathing systems [Volume 8, Issue 7, 2021, Pages 52-65]
• Shape Recovery The Effect of Fabrication Method and Hard-phase Properties on the Thermo-viscoelastic Performance of Polyurethane-based Shape Memory Polymer Used in Medical Scaffolds [Volume 5, Issue 3, 2018, Pages 32-43]
• Shear Deformation Theory Buckling and bending analysis of functional porous plate using shear deformation theory [Volume 9, Issue 8, 2022, Pages 34-43]
• Shear Force Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores [Volume 10, Issue 7, 2023, Pages 36-44]
• Shear size Non-destructive measurement of internal defects using shear laser interferometry method [Volume 7, Issue 1, 2020, Pages 45-52]
• Shear strength The effect of bonding time on microstructure and mechanical properties of Nimonic105 super alloy brazed joint [Volume 9, Issue 6, 2022, Pages 24-35]
• Shear strength test Investigation the shear strength and the microstructure of the dissimilar joint of S.S310S to zirconia ceramic using filler without active elements [Volume 8, Issue 5, 2021, Pages 1-13]
• Sheet hydroforming Microstructural Studies and Mechanical Properties of Hydroforming Process of AZ31B Magnesium and AA 2024 Aluminum Alloys Sheets at Elevated Temperatures [Volume 8, Issue 10, 2021, Pages 39-48]
• Sheet hydroforming Minimizing the required forming force in the sheet hydroforming process using a fractional factorial design [Volume 9, Issue 12, 2022, Pages 1-9]
• Sheet induction heating Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
• Sheet metal bending Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
• Sheet Metal Forming Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
• Sheet Metal Forming Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
• Shelf life Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
• SHELL Analysis of the cylindrical shell reinforced by the carbon nanotubes under the asymmetric internal pressure [Volume 11, Issue 12, 2024, Pages 43-63]
• Shielding gas Evaluation of the microstructure and mechanical properties of dissimilar welds between AISI310 and AISI316 austenitic stainless steels by pulsed current gas tungsten arc welding (PCGTAW) [Volume 11, Issue 2, 2024, Pages 1-19]
• Short fibers Manufacturing gypsum composite with short fiber of bagasse (sugarcane wastes) [Volume 8, Issue 4, 2021, Pages 12-18]
• Shrinkage Controlling the warpage of plastic parts in injection molding process using the variation in coolant temperature of core and cavity [Volume 6, Issue 5, 2019, Pages 39-46]
• Shrink fit Design and manufacturing of three layer pressure vessel by Shrink fit process [Volume 9, Issue 12, 2022, Pages 10-18]
• Shunting effect Experimental study of the shunting effect on tensile-shear strength of resistance spot welds in AA2219 sheets [Volume 8, Issue 12, 2021, Pages 44-50]
• Si3N4 Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
• SIC Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
• SiC nano particles The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
• Silica Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
• Silica Nanoparticles Investigating the healing-mechanical behavior of glass fibers/epoxy self-healing composites containing microcapsules and silica nanoparticles under the shear loading [Volume 9, Issue 1, 2022, Pages 31-42]
• Silicon carbide Investigation of mechanical, thermal and microstructural properties of PA6/NBR nanocomposites reinforced with silicon carbide nanoparticles [Volume 9, Issue 10, 2022, Pages 42-54]
• Silicon carbide Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
• Silicon Nitride Study of nonconductive Si3N4 ceramic machining ability by electrical discharge machining process by assisting electrode [Volume 9, Issue 5, 2022, Pages 13-22]
• Similar joints Evaluation and measurement of the residual stresses in stainless steel pipes and investigation of the effects of wall thickness on the stresses distribution [Volume 4, Issue 2, 2017, Pages 61-68]
• Simple shear extrusion Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
• Simplex Optimization Method Investigation the effect of mechanical properties of materials in solving the inverse identification problem by means of optimization algorithms [Volume 9, Issue 11, 2022, Pages 1-12]
• Simulation Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]
• Simulation Numerical and experimental analysis of laser welding process parameters on weld bead geometry [Volume 7, Issue 3, 2020, Pages 63-71]
• Simulation Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
• Simulation Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
• Simulation Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
• Simulation Modeling and investigation of pin geometry and vibration amplitude on the residual stress in ultrasonic hammer peening process [Volume 11, Issue 8, 2024, Pages 32-42]
• Simulation Experimental and numerical study of environmental parameters' influence on the surface morphology of mesostructures fabricated by integrating additive manufacturing and electroforming processes [Volume 11, Issue 11, 2024, Pages 15-25]
• Single crystal copper Investigation and optimization of parameters affecting surface roughness in single crystal copper nanomachining process using molecular dynamics method [Volume 8, Issue 10, 2021, Pages 49-60]
• Single Grit Scratch Test Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2019, Pages 54-62]
• Single Point Incremental Forming Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
• Sintering Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
• Sintering Investigating machining factors of recovery powder metallurgy parts, from filings and sintered by Design of experiments in conjunction with sensitivity analysis [Volume 7, Issue 7, 2020, Pages 24-37]
• Sintering Synthesis and Investigation of Properties of Polyethylene Oxide Bonding System for Production of High Density 316L Alloy Parts by Metal Injection Molding [Volume 8, Issue 8, 2021, Pages 60-69]
• SiO2 nanoparticles Microstructure and mechanical properties of AA5456/SiO2p nanocomposite fabricated by friction stir processing [Volume 7, Issue 4, 2020, Pages 39-47]
• Six-axis Force/Torque Sensor Design and fabrication of six axis force/torque sensor using strain gauges [Volume 9, Issue 3, 2022, Pages 1-10]
• Slab Method Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]
• Slitting method Experimental and numerical investigation of laser shock peening effects on residual stresses and fatigue life in hollow plate [Volume 8, Issue 3, 2021, Pages 59-67]
• SLM Additive manufacturing of nickel-based superalloy gas turbine components [Volume 9, Issue 3, 2022, Pages 38-45]
• Smart Composite Structure Investigating the healing-mechanical behavior of glass fibers/epoxy self-healing composites containing microcapsules and silica nanoparticles under the shear loading [Volume 9, Issue 1, 2022, Pages 31-42]
• SMAW Mechanical behavior of Fe/ TiC surface layer fabricated by SMAW process [Volume 4, Issue 1, 2017, Pages 44-53]
• Sniper Design and construction of a quadcopter with a new navigation module as a second view for snipers [Volume 8, Issue 8, 2021, Pages 52-59]
• Sobol Method An Examination of Environmental and Dimensional Parameters on Force and Critical Time of the Manipulation Process Using the Mechanical Theory of DMT Contact [Volume 7, Issue 9, 2020, Pages 1-9]
• Sobol sensitivity analysis Mathematical Modeling, Sobol Sensitivity Analysis and Optimization of Main Parameters in Drilling of E-glass/epoxy Laminated Composites [Volume 8, Issue 11, 2021, Pages 43-53]
• Sodium Chloride Concentration Detection Design and Fabrication of a Microfluidic System for Sodium Chloride Detection Using Modified Cholesteric Liquid Crystals [(Articles in Press)]
• Sodium dodecyl sulfate Investigating the effect of sodium dodecyl sulfate on microhardness changes of nickel-alumina composite coatings and pure nickel coatings [Volume 11, Issue 12, 2024, Pages 16-24]
• Solenoid A Solenoid Actuated Gecko-like Robotic Gripper [Volume 6, Issue 3, 2019, Pages 43-50]
• Sound test Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
• Space loading Designing and Manufacturing a Three-Dimensional Metamaterial with Re-entrant Structure Produced by 3D Printing for Energy Absorption [(Articles in Press)]
• Spark Plasma Sintering Production of Nanostructured Silver in Graphite and Inconel dies by Spark plasma sintering [Volume 7, Issue 6, 2020, Pages 1-7]
• Specific absorbed energy Experimental Investigation of Aluminum Foam Sandwich Panels under Quasi-static Loading [Volume 7, Issue 7, 2020, Pages 14-23]
• Specific Cutting Energy Experimental and numerical investigation of the turn-milling process on 1.7225 steel [(Articles in Press)]
• Specific energy absorption Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2019, Pages 54-66]
• Specific energy absorption Experimental study of the effect of 3D printing parameters and annealing process on the specific energy absorption of porous structures with interconnected pores fabricated of polylactic acid and 3D printed by fused deposition modeling method [Volume 12, Issue 2, 2025, Pages 18-29]
• Sperm Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2023, Pages 13-27]
• Spindle Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2023, Pages 1-12]
• Spiral anode Effect of Electroforming Process Parameters with One-way Pulse Current and Reverse Pulse Current (PRC) on Mechanical Properties and Thickness Uniformity of Produced Copper U-shaped [Volume 7, Issue 10, 2020, Pages 61-72]
• Spot Welding Process The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
• Spring-back The experimental and numerical study of the effect die parameters, grain size and ratio t/d on spring-back ‎in micro W-bending [Volume 9, Issue 9, 2022, Pages 1-9]
• Spring-back Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2023, Pages 61-76]
• Spring-back Presenting a new approach to reduce the spring-back angle of annealed copper sheets [Volume 11, Issue 3, 2024, Pages 38-50]
• Springback Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
• Spring Back A numerical-experimental investigation on spring back in rectangular section thin wall hollows and extracting a relation to estimate twisted angle by considering strain harden behavior [Volume 4, Issue 1, 2017, Pages 38-43]
• Spring Back Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2019, Pages 10-20]
• Spring Back Numerical and experimental investigation of the effect of local heating on the reduction of the spring back defect in the flexible roll forming process [Volume 9, Issue 9, 2022, Pages 35-44]
• Spring Back Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
• Spring Back The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050 [Volume 11, Issue 1, 2024, Pages 15-27]
• Spring Design Investigating the effect of changing the thickness of rear spring layers of a Custom-Made Dayun Truck on the life reliability of spring [(Articles in Press)]
• Spring Optimization Investigating the effect of changing the thickness of rear spring layers of a Custom-Made Dayun Truck on the life reliability of spring [(Articles in Press)]
• Square Tube Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube [Volume 6, Issue 4, 2019, Pages 14-22]
• St-52 Carbon Steel The Effect of the presence of the middle layer of 309-stainless steel on microstructure and mechanical properties of St-52 carbon steel cladded by high chromium-carbon electrode produced by fusion welding [Volume 5, Issue 2, 2018, Pages 34-42]
• Stability Using the artificial bee colony optimization, crow, and genetic algorithm for identifying and optimizing the dynamic parameters of a haptic device and operator’s hand [Volume 9, Issue 11, 2022, Pages 21-34]
• Stability Investigation of the impact of blade failure on the performance of a nonlinear bladed disk-shaft system [Volume 11, Issue 11, 2024, Pages 37-51]
• Stability limit diagram (SLD) Theoretical and Experimental Study of the Chatter Vibration in Dry and Wet Machining Conditions in the Turning Process [Volume 7, Issue 3, 2020, Pages 1-21]
• Stability lobe diagram Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
• Stacking sequence An experimental and numerical study on the low-velocity impact behavior of polymer matrix Kevlar-Basalt hybrid composites [Volume 7, Issue 6, 2020, Pages 44-55]
• Stainless Steel 316 L Fractal-based analysis of the influence of current intensity on surface hardness and surface roughness of Steel workpiece in Electrical Discharge process [Volume 7, Issue 11, 2020, Pages 21-33]
• Stainless steel EN 1.4903 Study of the performance of minimum quantity lubrication (MQL) and type of lubricant in the milling process of stainless steel EN 1.4903 [Volume 6, Issue 3, 2019, Pages 28-42]
• Stainless steel pipe Experimental and statistical analysis of pulsed Nd:YAG laser welding process for dimension optimization of connection in the AISI 316L stainless steel thin-walled tube [Volume 11, Issue 4, 2024, Pages 56-71]
• Stainless Steels Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
• Stainless steel sheet Predicting the fracture behavior of 304 stainless steel thin sheet in the micro scale [Volume 11, Issue 7, 2024, Pages 10-19]
• Stamping Process Experimental study on stamping of metal/composite laminates reinforced with glass fibers and nanoclay particles [Volume 8, Issue 2, 2021, Pages 1-10]
• Standing waves Suspension and trapping particles with a positive contrast factor and investigating the effect of particle volume in a liquid medium by the acoustophoretic phenomenon [Volume 9, Issue 4, 2022, Pages 12-23]
• Static analysis Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
• Statistical-experimental analysis Experimental study and statistical optimization of fabrication parameters affecting the flexural strength of composite grid-stiffened panels [Volume 8, Issue 11, 2021, Pages 1-15]
• Steel Investigation of the energy absorption in three-layer Al/Polypropylene/Steel deep drawn cups [Volume 7, Issue 6, 2020, Pages 34-43]
• Steel Cup The study of forming of steel cups using hydrodynamic deep drawing process [Volume 9, Issue 8, 2022, Pages 56-64]
• Steel plate forming Experimental evaluation of deflection and angular distortion of st37 steel plates after induction line heating [Volume 5, Issue 1, 2018, Pages 37-44]
• Stellite 6 Investigating the effect of CMT (Cold Metal Transfer) process on dilution of the Stellite 6 overlay [Volume 7, Issue 1, 2020, Pages 53-59]
• Step Down Experimental study of two-point incremental forming of St12 sheet using negative dies [Volume 9, Issue 12, 2022, Pages 32-42]
• Stereo vision Design and build an active stereo scanner and validation of results from a metrological viewpoint [Volume 6, Issue 2, 2019, Pages 20-29]
• Stewart Robot Application of Modal Analysis in Vibration Reduction and Optimization of Stewart Robot Motion Control [Volume 7, Issue 11, 2020, Pages 1-8]
• STL file format creation 3D printing of voxel-based structures by direct creation of STL file format [Volume 11, Issue 6, 2024, Pages 29-41]
• Strain Determination of dynamic plastic deformation behavior of DP 590 steel [Volume 11, Issue 4, 2024, Pages 13-25]
• Strain Gauge Design and fabrication of six axis force/torque sensor using strain gauges [Volume 9, Issue 3, 2022, Pages 1-10]
• Strain Path Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
• Strain Rate Development of a new process for the severe plastic deformation of AA 1050 to improve the mechanical properties [Volume 7, Issue 4, 2020, Pages 19-29]
• Strain Rate An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
• Strain Rate Determination of dynamic plastic deformation behavior of DP 590 steel [Volume 11, Issue 4, 2024, Pages 13-25]
• Strain rate sensitivity Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
• Strain-rate sensitivity coefficient map Construction of constitutive equations, modified dynamic materials model and strain-rate sensitivity coefficient map for investigation of hot and warm working instability of 2205 duplex stainless steel [Volume 8, Issue 12, 2021, Pages 1-10]
• Strength Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
• Strength Investigating the compressive strength of parts manufactured using the FDM method in a corrosive salt environment [Volume 12, Issue 4, 2025, Pages 76-86]
• Strength Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
• Stress Intensity Factor (SIF) Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
• Stress Recovery The Effect of Fabrication Method and Hard-phase Properties on the Thermo-viscoelastic Performance of Polyurethane-based Shape Memory Polymer Used in Medical Scaffolds [Volume 5, Issue 3, 2018, Pages 32-43]
• Structural Defect Detection Detection and measurement of warping in FDM additive manufacturing process using artificial intelligence and machine vision [Volume 11, Issue 12, 2024, Pages 1-15]
• Structural properties Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
• Structural properties Investigating the effect of carbon dioxide and nitrogen physical foaming agents on the structural properties of extruded polyethylene polymeric foams [Volume 11, Issue 10, 2024, Pages 24-31]
• Subsequent annealing Texture evolution of 409 ferritic stainless steel tubes through severe plastic deformation and subsequent annealing [Volume 7, Issue 2, 2020, Pages 42-48]
• Substrate material Investigation of the Effect of Substrate Material in Nano-indentation Process using Molecular Dynamics Simulation [Volume 8, Issue 10, 2021, Pages 1-15]
• Super alloy The effect of bonding time on microstructure and mechanical properties of Nimonic105 super alloy brazed joint [Volume 9, Issue 6, 2022, Pages 24-35]
• Superalloy Additive manufacturing of nickel-based superalloy gas turbine components [Volume 9, Issue 3, 2022, Pages 38-45]
• Superalloy Effect of laser power variation in AM-LMD process on Inconel 718 powder deposition profile on Inconel 738 [Volume 9, Issue 4, 2022, Pages 1-11]
• Supercapacitor Synergic effect of flower-like Cu-based metal-organic framework/graphene nanostructures on electrochemical performance of supercapacitors [Volume 7, Issue 2, 2020, Pages 33-41]
• Supercapacitor Synthesis and characterization of porous organic polymers based on diamine and trialdehyde for electrochemical energy storage [Volume 9, Issue 10, 2022, Pages 55-61]
• Surface alloying Investigation of aluminum surface properties in surface improvement process by electric discharge method [Volume 8, Issue 3, 2021, Pages 1-8]
• Surface Characteristics A hybrid lapping/anodizing technique for surface modification of the tungsten carbide mechanical seals used in direct reduction plant compressors of steel production industries [Volume 11, Issue 3, 2024, Pages 26-37]
• Surface composite The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
• Surface condition Study of the Electrochemical Corrosion Rate of Medical Implants of Titanium and Stainless Steel Made by Machining and selective laser melting under Different Surface Conditions [Volume 4, Issue 2, 2017, Pages 24-38]
• Surface Curvatures Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
• Surface effects Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
• Surface Hardness Fractal-based analysis of the influence of current intensity on surface hardness and surface roughness of Steel workpiece in Electrical Discharge process [Volume 7, Issue 11, 2020, Pages 21-33]
• Surface Hardness Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
• Surface modification Experimental investigation of flexural behavior of basalt fibers/epoxy-aluminum laminate composites containing nanoclay particles [Volume 5, Issue 1, 2018, Pages 45-54]
• Surface modification Optimization of Physical-Mechanical Properties of light cure Resins for use in 3D printing by micro and nano additives for industrial applications [Volume 6, Issue 8, 2019, Pages 33-42]
• Surface modification Effects of adding nano silica on hardness and tensile properties of stereolithography 3d printed parts [Volume 7, Issue 10, 2020, Pages 1-11]
• Surface morphology Experimental and numerical study of environmental parameters' influence on the surface morphology of mesostructures fabricated by integrating additive manufacturing and electroforming processes [Volume 11, Issue 11, 2024, Pages 15-25]
• Surface Partitioning Free-form surface localization using surface partitioning and genetic algorithm [Volume 5, Issue 3, 2018, Pages 22-31]
• Surface Quality An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
• Surface Quality Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2023, Pages 66-75]
• Surface Quality Experimental investigation of the effects of machining parameters on surface quality in turning aluminum matrix composites reinforced with Mg₂Si particles [Volume 11, Issue 9, 2024, Pages 13-25]
• Surface Quality Experimental investigation and optimization of the effect of process parameters in bone machining on bone surface quality [Volume 11, Issue 8, 2024, Pages 51-60]
• Surface Response Methodology Study of the effect of roller burnishing process parameters on surface roughness and micro hardness of cast iron parts. [Volume 8, Issue 1, 2021, Pages 23-34]
• Surface roughness Experimental Study of Material Removal Rate, Surface Roughness and Topography in Electrical Discharge Machining of Titanium Aluminide Intermetallic Compound [Volume 3, Issue 3, 2016, Pages 29-39]
• Surface roughness The Comparison of Output Characteristics in Electrical Discharge machining and Aluminum Powder Mixed EDM Processes on Titanium Aluminide Intermetallic Compound [Volume 4, Issue 1, 2017, Pages 25-37]
• Surface roughness Simultaneous optimization of surface roughness and material removal rate in dry turning of super alloy Inconel 600 [Volume 5, Issue 3, 2018, Pages 1-11]
• Surface roughness Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
• Surface roughness The effect of cryogenic cooling on surface topography in the PEEK grinding process [Volume 7, Issue 1, 2020, Pages 1-12]
• Surface roughness Experimental investigation of the simultaneous effect of machining parameters, axial force and cutting torque on the surface roughness of the produced hole in the drilling of the 7000 series AL Alloy workpiece [Volume 7, Issue 1, 2020, Pages 26-38]
• Surface roughness Study on the effect of thickness of layers, temperature and speed of nozzle on circularity error and surface roughness of holes in parts produced during fused deposition modeling [Volume 7, Issue 7, 2020, Pages 38-50]
• Surface roughness The effect of current intensity and feed rate on surface roughness and fatigue life of work piece in wire electrical discharge turning (WEDT) process [Volume 7, Issue 8, 2020, Pages 36-44]
• Surface roughness Optimization of surface roughness, striation and burr formation during machining of aluminum 2024-T351 with abrasive water jet machining [Volume 7, Issue 10, 2020, Pages 12-25]
• Surface roughness Experimental evaluation of the simultaneous effect of Nanoparticle ZnO and spark peak current on MRR, surface roughness and surface micro cracks of the AISI1045، AISI 4140 و AISI D3 [Volume 7, Issue 10, 2020, Pages 46-60]
• Surface roughness Fractal-based analysis of the influence of current intensity on surface hardness and surface roughness of Steel workpiece in Electrical Discharge process [Volume 7, Issue 11, 2020, Pages 21-33]
• Surface roughness Experimental study of the effect of electrical discharge machining parameters on surface roughness and Material removal rate of boron carbide ceramic [Volume 7, Issue 11, 2020, Pages 42-51]
• Surface roughness Investigating the effect of build orientation on surface roughness and build time using Fused Deposition Modelling [Volume 7, Issue 12, 2020, Pages 37-53]
• Surface roughness Study of the effect of roller burnishing process parameters on surface roughness and micro hardness of cast iron parts. [Volume 8, Issue 1, 2021, Pages 23-34]
• Surface roughness Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel [Volume 8, Issue 2, 2021, Pages 52-64]
• Surface roughness Experimental Investigation of the Effective Parameters in 7075-T6 Aluminum Machining Process on Surface Roughness Using Minimum Quantity Lubrication (MQL) and Cold Fluid [Volume 8, Issue 6, 2021, Pages 7-14]
• Surface roughness Experimental study and sobol sensitivity analysis in optimizing the effective parameters of dry turning process of aluminum alloy 6061-T6 [Volume 8, Issue 8, 2021, Pages 12-23]
• Surface roughness Investigation and optimization of parameters affecting surface roughness in single crystal copper nanomachining process using molecular dynamics method [Volume 8, Issue 10, 2021, Pages 49-60]
• Surface roughness The effect of H900 and H1150 heat treatment on the machinability of 15-5 PH stainless steel [Volume 8, Issue 12, 2021, Pages 11-20]
• Surface roughness Electrical discharge machining of metal matrix composite AZ91 magnesium alloy and investigation and optimization of the effect of input parameters on material removal rate and workpiece surface roughness [Volume 9, Issue 6, 2022, Pages 59-69]
• Surface roughness Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
• Surface roughness Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
• Surface roughness The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2023, Pages 49-60]
• Surface roughness Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
• Surface roughness Optimization of drilling of AA7075 metal matrix composites using response surface method [Volume 11, Issue 10, 2024, Pages 32-44]
• Surface roughness Developing surface roughness prediction model using deep convolutional network [Volume 11, Issue 11, 2024, Pages 26-36]
• Surface roughness Temperature and surface quality investigation in orthogonal machining of cortical bone using response surface method and sensitivity analysis [Volume 11, Issue 12, 2024, Pages 64-78]
• Surface roughness Investigating the Effective Parameters on Surface roughness and Material Removal Rate in Milling of Hybrid Aluminum Matrix Composites [(Articles in Press)]
• Surface roughness Experimental investigation of tool wear and surface quality in ultrasonic-assisted drilling of grey cast iron [(Articles in Press)]
• Surface smoothness The Effects of Angular Velocity and Combination of AIO2 and SiC Abrasive Particle by Use of NMAF Method [Volume 8, Issue 6, 2021, Pages 26-33]
• Surface Topography Experimental Study of Material Removal Rate, Surface Roughness and Topography in Electrical Discharge Machining of Titanium Aluminide Intermetallic Compound [Volume 3, Issue 3, 2016, Pages 29-39]
• Surface Transformation Hardening Investigation of the effect of surface transformation hardening by high power diode laser on the microstructure, hardness and wear behavior of AISI O1 cold work tool steel [Volume 8, Issue 1, 2021, Pages 14-22]
• Suspension in water Suspension and trapping particles with a positive contrast factor and investigating the effect of particle volume in a liquid medium by the acoustophoretic phenomenon [Volume 9, Issue 4, 2022, Pages 12-23]
• Swirler Additive manufacturing of nickel-based superalloy gas turbine components [Volume 9, Issue 3, 2022, Pages 38-45]