[1] Engel U, Eckstein R. Microforming—from basic research to its realization. Journal of Materials Processing Technology. 2002 Sep 9;125:35-44.
doi: 10.1016/s0924-0136(02)00415-6
[2] Karimi Firouzjaei M, Moslemi Naeini H, Kasaei MM, Mirnia MJ. A constitutive model for stainless steel 304 sheet considering size effect in micro-scale. Modares Mechanical Engineering. 2022 Aug 10;22(8):519-28.
doi: 10.52547/mme.22.8.519 [In Persian]
[3] Hajiahmadi S, Naeini HM, Talebi-Ghadikolaee H, Safdarian R, Zeinolabedin-Beygi A. Effect of anisotropy on spring-back of pre-punched profiles in cold roll forming process: an experimental and numerical investigation. The International Journal of Advanced Manufacturing Technology. 2023 Dec;129(9):3965-78.
doi: 10.1007/s00170-023-12516-5
[4] Karimi Firouzjaei M, Moslemi Naeini H, Farahmand HR, Abbaszadeh B, Kasaei MM. Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe. Modares Mechanical Engineering. 2018 Jan 10;17(10):259-70. [In Persian]
[5] Talebi-Ghadikolaee H, Moslemi Naeini H, Rabiee AH, Zeinolabedin Beygi A, Alexandrov S. Experimental-numerical analysis of ductile damage modeling of aluminum alloy using a hybrid approach: ductile fracture criteria and adaptive neural-fuzzy system (ANFIS). International Journal of Modelling and Simulation. 2023 Sep 3;43(5):736-51.
doi: 10.1080/02286203.2022.2121675
[6] Khademi M, Naeini HM, Mirnia MJ, Kasaei MM, da Silva LF. Fracture prediction of AA6061-T6 sheet in bending process using Gurson–Tvergaard–Needleman model. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2023 Dec;237(12):2506-19.
doi: 10.1177/14644207221134504
[7] Kasaei MM, Naeini HM, Abbaszadeh B, Mohammadi M, Ghodsi M, Kiuchi M, Zolghadr R, Liaghat G, Tafti RA, Tehrani MS. Flange wrinkling in flexible roll forming process. Procedia Engineering. 2014 Jan 1;81:245-50.
doi: 10.1016/j.proeng.2014.09.158
[8] Amini A, Naeini HM, Azodi HD, Talebi-Ghadikolaee H, Badparva H, Zeinolabedin-Beygi A. Hydro-mechanical deep drawing of conical components: Wrinkling behavior and process enhancement. Journal of Engineering Research. 2024 Apr 9.
doi: 10.1016/j.jer.2024.04.005
[9] Talebi-Ghadikolaee H, Elyasi M, Dadgar Asl Y, Zeinolabedin Beygi A, Davoudi M. Feasibility of forming U-shaped microchannels by flexible-die forming process. Karafan Quarterly Scientific Journal. 2022 Nov 22;19(3):53-70.
doi: 10.48301/kssa.2022.336972.2063 [In Persian]
[10] Karimi Firouzjaei M, Moslemi Naeini H, Kasaei MM, Abbaszadeh B, da Silva LF. Effect of flower pattern design on the springback of high strength steel in cold roll forming process of pipes. InInternational Conference on Mechanics of Solids 2022 Nov 3 (pp. 49-61). Cham: Springer International Publishing.
doi: 10.1007/978-3-031-26797-0_5
[11] Elyasi M, Talebi-Ghadikolaee H, Zeinolabedin-Beygi A, Modanloo V, Khatir FA. The effect of aging heat treatment on the formability and microstructure of the AA6063 tube in the rotary draw bending process. Journal of Engineering Research. 2023 Oct 11.
doi: 10.1016/j.jer.2023.10.017
[12] Firouzjaei MK, Naeini HM, Kasaei MM, Mirnia MJ, da Silva LF. A microscale constitutive model for thin stainless steel sheets considering size effect. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2023 Oct;237(10):2104-14.
doi: 10.1177/14644207231169456
[13] Fu MW, Chan WL. Geometry and grain size effects on the fracture behavior of sheet metal in micro-scale plastic deformation. Materials & Design. 2011 Dec 1;32(10):4738-46.
doi: 10.1016/j.matdes.2011.06.039
[14] Parasiz SA, VanBenthysen R, Kinsey BL. Deformation size effects due to specimen and grain size in microbending. Journal of manufacturing science and engineering. 2010 Jan;132(1):327-36.
doi: 10.1115/msec2010-34038
[15] Meng B, Zhang YY, Cheng C, Han JQ, Wan M. Effect of plastic anisotropy on microscale ductile fracture and microformability of stainless steel foil. International Journal of Mechanical Sciences. 2018 Nov 1;148:620-35.
doi: 10.1016/j.ijmecsci.2018.09.027
[16] Xu ZT, Peng LF, Lai XM, Fu MW. Geometry and grain size effects on the forming limit of sheet metals in micro-scaled plastic deformation. Materials Science and Engineering: A. 2014 Aug 12;611:345-53.
doi: 10.1016/j.msea.2014.05.060
[17] Ran JQ, Fu MW. Applicability of the uncoupled ductile fracture criteria in micro-scaled plastic deformation. International Journal of Damage Mechanics. 2016 Apr;25(3):289-314.
doi: 10.1177/1056789515578181
[18] Bao ME, Jiejie SH, Zhang Y, Cheng C, Bolin MA, Min WA. Feasibility evaluation of failure models for predicting forming limit of metal foils. Chinese Journal of Aeronautics. 2020 Sep 1;33(9):2461-71.
doi: 10.1016/j.cja.2019.09.002
[19] Firouzjaei MK, Naeini HM, Kasaei MM, Mirnia MJ, da Silva LF. Microscale modeling of the ductile fracture behavior of thin stainless steel sheets. Thin-Walled Structures. 2024 Mar 1;196:111457.
doi: 10.1016/j.tws.2023.111457
