[1] Davim JP, Reis P, António CC. Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up. Composites Science and Technology. 2004 Feb 1;64(2):289-97.
doi: 10.1016/S0266-3538(03)00253-7
[2] Khoran M, Ghabezi P, Frahani M, Besharati MK. Investigation of drilling composite sandwich structures. The International Journal of Advanced Manufacturing Technology. 2015 Feb;76:1927-36.
doi: 10.1007/s00170-014-6427-x
[3] Akhavan-Safar A, Salamat-Talab M, Delzendehrooy F, Zeinolabedin-Beygi A, da Silva LF. Effects of natural date palm tree fibres on mode II fracture energy of E-glass/epoxy plain-woven laminated composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 Oct;44(10):457.
doi: 10.1007/s40430-022-03717-2
[4] Salamat-Talab M, Akhavan-Safar A, Zeinolabedin-Beygi A, Carbas RJ, da Silva LF. Effect of through-the-thickness delamination position on the R-curve behavior of plain-woven ENF specimens. Materials. 2023 Feb 22;16(5):1811.
doi: 10.3390/ma16051811
[5] Abrao AM, Faria PE, Rubio JC, Reis P, Davim JP. Drilling of fiber reinforced plastics: A review. Journal of Materials Processing Technology. 2007 May 7;186(1-3):1-7.
doi: 10.1016/j.jmatprotec.2006.11.146
[6] El-Sonbaty I, Khashaba UA, Machaly T. Factors affecting the machinability of GFR/epoxy composites. Composite structures. 2004 Feb 1;63(3-4):329-38.
doi: 10.1016/S0263-8223(03)00181-8
[7] Abdollahi H, Mahdavinejad R, Ghambari M, Moradi M. Investigation of green properties of iron/jet-milled grey cast iron compacts by response surface method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2014 Apr;228(4):493-503.
doi: 10.1177/0954405413502023
[8] Moradi M, Golchin E. Investigation on the effects of process parameters on laser percussion drilling using finite element methodology; statistical modelling and optimization. Latin American Journal of Solids and Structures. 2017 Mar;14(3):464-84.
doi: 10.1590/1679-78253247
[9] Salamat-Talab M, Tahmasbi V, Safari M, Zeinolabedin Beygi A. Mathematical modeling, sobol sensitivity analysis and optimization of main parameters in drilling of E-glass/epoxy laminated composites. Iranian Journal of Manufacturing Engineering. 2022 Feb 19;8(11):43-53. [In Persian]
[10] Lachaud F, Piquet R, Collombet F, Surcin L. Drilling of composite structures. Composite structures. 2001 May 1;52(3-4):511-6.
doi: 10.1016/S0263-8223(01)00040-X
[11] Kumar MB, Sathiya P. Methods and materials for additive manufacturing: A critical review on advancements and challenges. Thin-Walled Structures. 2021 Feb 1;159:107228.
doi: 10.1016/j.tws.2020.107228
[12] Falahati M, Ahmadvand P, Safaee S, Chang YC, Lyu Z, Chen R, Li L, Lin Y. Smart polymers and nanocomposites for 3D and 4D printing. Materials today. 2020 Nov 1;40:215-45.
doi: 10.1016/j.mattod.2020.06.001
[13] Roudbarian N, Baniasadi M, Ansari M, Baghani M. An experimental investigation on structural design of shape memory polymers. Smart Materials and Structures. 2019 Aug 12;28(9):095017.
doi: 10.1088/1361-665X/ab3246
[14] Manns M, Morales J, Frohn P. Additive manufacturing of silicon based PneuNets as soft robotic actuators. Procedia Cirp. 2018 Jan 1;72:328-33.
doi: 10.1016/j.procir.2018.03.186
[15] Clarke GA, Hartse BX, Niaraki Asli AE, Taghavimehr M, Hashemi N, Abbasi Shirsavar M, Montazami R, Alimoradi N, Nasirian V, Ouedraogo LJ, Hashemi NN. Advancement of sensor integrated organ-on-chip devices. Sensors. 2021 Feb 15;21(4):1367.
doi:
10.3390/s21041367
[16] Negrini NC, Celikkin N, Tarsini P, Farè S, Święszkowski W. Three-dimensional printing of chemically crosslinked gelatin hydrogels for adipose tissue engineering. Biofabrication. 2020 Jan 16;12(2):025001.
doi:
10.1088/1758-5090/ab56f9
[17] Kabiri A, Liaghat G, Alavi F, Saidpour H, Hedayati SK, Ansari M, Chizari M. Glass fiber/polypropylene composites with potential of bone fracture fixation plates: manufacturing process and mechanical characterization. Journal of Composite Materials. 2020 Dec;54(30):4903-19.
doi:
10.1177/0021998320940367
[18] Tiu J, Belli R, Lohbauer U. Rising R-curves in particulate/fiber-reinforced resin composite layered systems. Journal of the Mechanical Behavior of Biomedical Materials. 2020 Mar 1;103:103537.
doi:
10.1016/j.jmbbm.2019.103537
[19] Lassila L, Säilynoja E, Prinssi R, Vallittu PK, Garoushi S. Fracture behavior of Bi-structure fiber-reinforced composite restorations. Journal of the Mechanical Behavior of Biomedical Materials. 2020 Jan 1;101:103444. doi:
10.1016/j.jmbbm.2019.103444
[20] Tiu J, Belli R, Lohbauer U. R-curve behavior of a short-fiber reinforced resin composite after water storage. Journal of the Mechanical Behavior of Biomedical Materials. 2020 Apr 1;104:103674. doi:
10.1016/j.jmbbm.2020.103674
[21] Hedayati SK, Behravesh AH, Hasannia S, Saed AB, Akhoundi B. 3D printed PCL scaffold reinforced with continuous biodegradable fiber yarn: A study on mechanical and cell viability properties. Polymer Testing. 2020 Mar 1;83:106347.
doi: 10.1016/j.polymertesting.2020.106347
[22] Caminero MA, Chacón JM, García-Moreno I, Reverte JM. Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. Polymer Testing. 2018 Jul 1;68:415-23.
doi: 10.1016/j.polymertesting.2018.04.038
[23] Biron M. Thermoplastics and Thermoplastic Composites. 2nd ed. Amsterdam, Netherlands: Elsevier; 2018.
[24] Mallick PK. Materials, Design and Manufacturing for Lightweight Vehicles. Cambridge: Woodhead Publishing; 2010.
[25] Biron M. Material Selection for Thermoplastic Parts: Practical and Advanced Information. Amsterdam, Netherlands: Elsevier; 2016.
[26] Penumakala PK, Santo J, Thomas A. A critical review on the fused deposition modeling of thermoplastic polymer composites. Composites Part B: Engineering. 2020 Nov 15;201:108336.
doi: 10.1016/j.compositesb.2020.108336
[27] Parlevliet PP, Bersee HE, Beukers A. Residual stresses in thermoplastic composites—A study of the literature—Part II: Experimental techniques. Composites Part A: Applied Science and Manufacturing. 2007 Mar 1;38(3):651-65.
doi: 10.1016/j.compositesa.2006.07.002
[28] Fleischer J, Teti R, Lanza G, Mativenga P, Möhring HC, Caggiano A. Composite materials parts manufacturing. CIRP Annals. 2018 Jan 1;67(2):603-26.
doi: 10.1016/j.cirp.2018.05.005
[29] Chen WC. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. International Journal of Machine Tools and Manufacture. 1997 Aug 1;37(8):1097-108.
doi: 10.1016/S0890-6955(96)00095-8
[30] Hocheng H, Tsao CC. Comprehensive analysis of delamination in drilling of composite materials with various drill bits. Journal of materials processing technology. 2003 Sep 22;140(1-3):335-9.
doi: 10.1016/S0924-0136(03)00749-0
[31] Ghesmati-Kucheki H, Zakeri M, Ayatollahi MR. Investigating the effect of different variables to reduce delamination due to drilling in composite laminates. Iranian Journal of Manufacturing Engineering. 2021 Aug 23;8(6):15-20. [In Persian]
[32] Lazar MB, Xirouchakis P. Experimental analysis of drilling fiber reinforced composites. International Journal of Machine Tools and Manufacture. 2011 Dec 1;51(12):937-46.
doi: 10.1016/j.ijmachtools.2011.08.009
[33] Abrao AM, Rubio JC, Faria PE, Davim JP. The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite. Materials & Design. 2008 Jan 1;29(2):508-13.
doi: 10.1016/j.matdes.2007.01.016
[34] Mudhukrishnan M, Hariharan P, Palanikumar K. Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills. Measurement. 2020 Jan 1;149:106973.
doi: 10.1016/j.measurement.2019.106973
[35] Srinivasan T, Palanikumar K, Rajagopal K. Influence of thrust force in drilling of glass fiber reinforced polycarbonate (GFR/PC) thermoplastic matrix composites using box-behnken design. Procedia Materials Science. 2014 Jan 1;5:2152-8.
doi: 10.1016/j.mspro.2014.07.419
[36] Sorrentino L, Turchetta S, Bellini C. A new method to reduce delaminations during drilling of FRP laminates by feed rate control. Composite Structures. 2018 Feb 15;186:154-64.
doi: 10.1016/j.compstruct.2017.12.005
[37] Palanikumar K. Experimental investigation and optimisation in drilling of GFRP composites. Measurement. 2011 Dec 1;44(10):2138-48.
doi: 10.1016/j.measurement.2011.07.023
[38] Gazor MS, Ansari M, Hedayati SK, Ansari M. Bone fixation implants with in-situ controllable stiffness: Modifying the R-curve behavior by 3D printing. Journal of Composite Materials. 2022 Jun;56(15):2337-50.
doi: 10.1177/00219983221092843
[39] Amini S, Baraheni M, Moeini Afzal M. Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites. Journal of Science and Technology of Composites. 2018;5(1):41-50. [In Persian]
[40] Hocheng H, editor. Machining Technology for Composite Materials: Principles and Practice. Cambridge: Woodhead Publishing; 2011.
[41] Sheikh-Ahmad JY. Machining of polymer composites. New York: Springer; 2009.
[42] Wang H, Sun J, Li J, Li W. Investigation on delamination morphology during drilling composite laminates. The International Journal of Advanced Manufacturing Technology. 2014 Sep;74:257-66.
doi: 10.1007/s00170-014-5973-6
