Iranian Journal of Manufacturing Engineering

Main Subjects = Powder Metallurgy, Casting & Metal composite

Investigating the microstructure and mechanical properties of vanadium bearing delta-Trip Steel

Articles in Press, Accepted Manuscript, Available Online from 30 December 2023

10.22034/ijme.2023.417333.1832

Yaser Emamian; AliReza Kolahi; Yahya palizdar

View Article

Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel

Volume 8, Issue 11, February 2022, Pages 16-34

Hamid Reza Shahverdi; Amirsalar Dehghani; Mohammad Zabihi Gargari; Mohammad Emami

Investigation of microstructure and hardness of recycled aluminum seamless tube using friction stir consolidation

Volume 8, Issue 11, February 2022, Pages 35-42

Reza َAbdi Behnagh; Rasoul Jabarshayan

Investigation of the Effect of Substrate Material in Nano-indentation Process using Molecular Dynamics Simulation

Volume 8, Issue 10, December 2021, Pages 1-15

Nafise Mahdiyar; Seyed Vahid Hosseini

Investigation of flow behavior and microstructure modification of ATI425 alloy with initial martensite microstructure in α/β phase and β single phase

Volume 8, Issue 9, November 2021, Pages 1-13

rashid mahdavi; Esmaeil Emadoddin; seed mehdi abbasi

Synthesis and Investigation of Properties of Polyethylene Oxide Bonding System for Production of High Density 316L Alloy Parts by Metal Injection Molding

Volume 8, Issue 8, October 2021, Pages 60-69

masoud moradjoy Hamedani; Hamid Khorsand

Numerical and experimental analysis on the properties of ionic-polymer-metal composites

Volume 8, Issue 6, August 2021, Pages 21-25

Hamid Soleimanimehr; Amin Nasrollah

Prototyping of piezoceramic-polymer composites using Solution Casting method for use in acoustic Transducers

Volume 8, Issue 5, July 2021, Pages 14-22

Mohammad Sadeghi kia; Hamid Ghasemi meyghani

Comparison of the effect of quenching-tempering (Q-T) and quenching-partitioning-tempering (Q-P-T) heat treatments on the microstructure and mechanical properties of a high strength steel containing Ti micro-alloy

Volume 8, Issue 5, July 2021, Pages 43-50

ali almasi; Abbas kian vash; Abolfazl Tutunchi

Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings

Volume 8, Issue 3, May 2021, Pages 20-34

Mohsen Ghadyani; Vali Enjilela

Investigation of effects of the temperature and adding nano-SiO2-particles on high-temperature mechanical properties for the piston aluminum-silicon alloy

Volume 8, Issue 3, May 2021, Pages 47-58

Mohammad Azadi; Arash Naderi; Abdolhossein Freidoon

Investigation of the effect of surface transformation hardening by high power diode laser on the microstructure, hardness and wear behavior of AISI O1 cold work tool steel

Volume 8, Issue 1, March 2021, Pages 14-22

Amirsalar Dehghani; امیررضا فرنیا; Mohammad Javad Torkamany

Fractal-based analysis of the influence of current intensity on surface hardness and surface roughness of Steel workpiece in Electrical Discharge process

Volume 7, Issue 11, January 2021, Pages 21-33

Iman Mahmoudinia; Hamid Soleimanimehr; Adel maghsoudpour; Shahram Etemadi Haghighi

Synthesis of CuNiF and CoMnF nano ferrites by sol-gel combustion method and their catalytic influence on thermal decomposition behavior of ammonium perchlorate nanoparticles

Volume 7, Issue 10, December 2020, Pages 26-33

Zahra Khodadadipoor; Arman Sedghi; Javad Mohebbi zinab; Marziyeh Azadfalah; saeid baghshahi; samaneh hedayati

The influences of radial-forward-backward extrusion on the microstructure and mechanical evolution of AM60 magnesium alloy by experimental and finite element micromechanical based cellular automaton approach

Volume 7, Issue 9, November 2020, Pages 25-41

Sajjad Ebrahimzadeh; Hossein Jafarzadeh

Fabrication and Characterization of Functionally Graded in-situ Al/Al-Cu-Cr Composite by Centrifugal Casting Process

Volume 7, Issue 9, November 2020, Pages 52-64

Maryam Yousefi; Hamid Doostmohammadi

Effect of SiO2 and MoS2 nanoparticles on microstructure and wear resistance of electroless nanocomposite Ni-P-SiO2-MoS2 coating

Volume 7, Issue 9, November 2020, Pages 65-71

B. Rezaee; E. Kermani; Farid Biniyazan; S. Ejlali; Hamid Soleimanimehr

The effects of Cr addition on the phase transformation, microstructure and mechanical properties of advanced high-strength steel

Volume 7, Issue 8, October 2020, Pages 45-53

Mohammad Zabihi Gargari; Hamid Reza Shahverdi; Mohammad Emami; Mohsen Askari-Paykani

Investigating machining factors of recovery powder metallurgy parts, from filings and sintered by Design of experiments in conjunction with sensitivity analysis

Volume 7, Issue 7, September 2020, Pages 24-37

Moiein Taheri; Seyed Hasan Bathaee

Production of Nanostructured Silver in Graphite and Inconel dies by Spark plasma sintering

Volume 7, Issue 6, August 2020, Pages 1-7

Peyman Falak; Iman Ebrahimzadeh

Composite fabrication and surface reinforcement of aluminum 7075 by pumice micro and nanoparticles using the friction stir process (FSP)

Volume 7, Issue 5, July 2020, Pages 56-63

Rashid Tohidi Manesh; Mehdi Ghobeiti Hasab; Ali Heidary Moghadam

Microstructure and mechanical properties of AA5456/SiO2p nanocomposite fabricated by friction stir processing

Volume 7, Issue 4, June 2020, Pages 39-47

Rasoul Naderi; Mostafa Hajian Heidary; Mohsen Karimi; Alireza Ahmadi

Comparison of wear behavior of an alloy developed as TRIP steel and DP steel

Volume 7, Issue 4, June 2020, Pages 48-54

Iman Hajannia; Mohammad Reza Pakmanesh; Morteza Shamanian; Masoud Atapour

Experimental evaluation of the effect of the mass of ZnO, Nio, Fe3O4, Cdo nanoparticles on the damping ratio of Nano-fluid with glycerin base

Volume 7, Issue 2, May 2020, Pages 8-16

Ali Kamel; Masoud Pour; Hassan Karimi Male; Ehsan Jamshidi

Investigation of Corrosion of Aluminum – Brass Alloy in Desalination Plant of South Pars Gas Complex

Volume 7, Issue 2, May 2020, Pages 17-25

Behroz Afshari Bahman Biglo; Esmaeil Jafari

Iranian Journal of Manufacturing Engineering

Journal Archive

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)