Main Subjects = Joining Processes
Number of Articles: 33
Effect of Temper and Quench Heat Treatment on Mechanical Properties and Microstructure of AISI 4130 to AISI 4340 Steel Joint with GTAW Process

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.423695.1876

MEHDI Mizabi asl; majid belbasi; Mohammad Ammar Mofid

Experimental study of the shunting effect on tensile-shear strength of resistance spot welds in AA2219 sheets

Volume 8, Issue 12, March 2022, Pages 44-50

Mahdi Jafarpoor; Mahdi Jafari; Behrooz Shahriari

Effect of temperature-dependent physical properties on finite element modeling of laser welding of titanium alloy

Volume 8, Issue 10, December 2021, Pages 16-27

Farid Vakili Tahami; Hamed Halimi Khosroshahi; Ebrahim Safari

Experimental investigation of the effects of laser parameters on the strength and size of the weld nugget in laser spot welding of stainless steel sheet 316

Volume 8, Issue 5, July 2021, Pages 23-29

Mehdi Mirzaloo; Mehdi Modabberifar; Moiein Taheri; Iman Alighoorchi; Alireza Karian

The Effect of Thickness, Welding Metals Sequence and Composition on Residual Stresses in Welding Gas Steel Pipes using LTT filler

Volume 8, Issue 2, April 2021, Pages 11-22

alireza jami; mohammadreza khoshravan azar; Mojtaba Yazdani

Experimental study on manufacturing of bi-metal sandwiches with aluminum foam core and copper layers using friction stir welding

Volume 7, Issue 12, February 2021, Pages 1-9

Mohsen Dorudgar; S. M. Hossein Seyedkashi; Moosa Sajed

The effect of the die geometry on the joint strength of Al 3105 aluminum sheets joined by the clinching process

Volume 7, Issue 12, February 2021, Pages 10-23

MohammadHosein Mirzaei; Ali Fazli; Parviz Asadi; Mahdi Soltanpour

Assessment of using the floating bobbin tool for double sided friction stir welding of aluminium

Volume 7, Issue 3, June 2020, Pages 52-62

Mohammad Ali Naziri; Amin Rabiezadeh

Investigating the effect of CMT (Cold Metal Transfer) process on dilution of the Stellite 6 overlay

Volume 7, Issue 1, March 2020, Pages 53-59

Mohammad Mashhadgarme; S. Hossein Elahi; Majid Rajaei; Mohmoud Riyazifar; Hassan Hosseini

Application of pre-heating in the reduction of distortion in the dissimilar joints welding SS type 304 and carbon steel A106-B

Volume 6, Issue 6, November 2019, Pages 51-63

mehran charkhi; Gholamreza Faghani; davood akbari; Maghohd Shalvandi

Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6

Volume 6, Issue 4, September 2019, Pages 1-6

Mohammad Karimi Ivanaki; Davood Afshari; Hassan Seidi

Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating

Volume 6, Issue 1, May and June 2019, Pages 12-23

Mansour sadeghinasab; MohammadReza Khanzadeh Gharahshiran; Abbas Saadat

Iranian Journal of Manufacturing Engineering

Journal Archive