Experimental investigation of the compressive strength of polylactic acid/continuous glass fiber composite material produced with an extrusion-based 3D printer using the simultaneous impregnation system of fibers and polymer

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.442326.1929

Amin Safi Jahanshahi

• View Article

Investigating the energy absorption quality of the porous Schwarz P structure made by 3D printing method

Volume 9, Issue 11, January 2023, Pages 13-20

10.22034/ijme.2023.383269.1744

Seyyed Mohammad Bagher Mirafzali; Ali Hasanabadi

• View Article
• PDF 1.2 M

Investigating the bending properties of polymeric orthopedic plaque made of different polymers by additive manufacturing method

Volume 9, Issue 9, November 2022, Pages 21-25

10.22034/ijme.2023.376919.1726

Mohammah Hossein Pol; Gholamhossein Liaghat

• View Article
• PDF 412.56 K

Investigating the mechanical behavior of the infinity structure inspired by the silkworm cocoon and comparing it with the rod structure for use in architectural cellular structures

Volume 9, Issue 6, September 2022, Pages 11-23

10.22034/ijme.2022.160938

Mostafa Hosseini Vajari; Hossein Moradi Nasab; Morteza Behzadnasab; Mahmoud Nikkhah Shahmirzadi; Majid Soltani

• View Article
• PDF 941.27 K

Comparison of Tensile Strength for 3D Printed Parts Fabricated by Fused Filament Fabrication (FFF)

Volume 9, Issue 5, August 2022, Pages 40-48

10.22034/ijme.2022.160058

Jalal Joudaki; Seyed Amirhosein Naghavi Alhoseini

• View Article
• PDF 683.67 K

Effects of adding nano silica on hardness and tensile properties of stereolithography 3d printed parts

Volume 7, Issue 10, December 2020, Pages 1-11

Zahra Shirband; Soheil Dariushi; Morteza Behzadnasab

• View Article
• PDF 1.19 M

Influence of infill density and printing pattern on flexural properties of 3D printed short carbon fiber PLA composite

Volume 7, Issue 9, November 2020, Pages 42-51

Seyyed Mohsen Mousavi Kani; Milad Sadegh Yazdi; Mohammad Hadi Hosseinzadeh

• View Article
• PDF 610.76 K

Investigation of physical and mechanical properties of 3D printed parts by using of ABS plastic filaments filled by alumina

Volume 7, Issue 4, June 2020, Pages 1-9

Arman Gholizadeh Roshan; Abbas Zolfaghari; Mohsen Shakeri

• View Article
• PDF 2.72 M

Optimization of Physical-Mechanical Properties of light cure Resins for use in 3D printing by micro and nano additives for industrial applications

Volume 6, Issue 8, January 2020, Pages 33-42

Morteza Behzadnasab; Motahare Hosseini

• View Article
• PDF 1.32 M