[1] T. N. A. T. Rahim, A. M. Abdullah, H. Md Akil, Recent developments in fused deposition modeling-based 3D printing of polymers and their composites, Polymer Reviews, Vol. 59, No. 4, pp. 589-624, 2019, doi: 10.1080/15583724.2019.1597883.
[2] M. Khosravi, S. M. Hosseini, M. Lakhi, Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method, Journal of Solid and Fluid Mechanics, Vol. 11, No. 3, pp. 119-133, 2021, doi: 10.22044/jsfm.2021.2209. (in Persian)
[3] A. Gholizadeh Roshan, A. Zolfaghari, M. Shakeri, Investigation of physical and mechanical properties of 3D printed parts by using of ABS plastic filaments filled by alumina, Iranian Journal of Manufacturing Engineering, Vol. 7, No. 4, pp. 1-9, 2020. (in Persian)
[4] M. Hosseini Vajari, S. Dariushi, M. Behzadnasab, An experimental investigation on mechanical properties of 3D-printed bio-inspired sandwich panels based on silk cocoon geometry, Iranian Journal of Manufacturing Engineering, Vol. 8, No. 4, pp. 19-26, 2021. (in Persian)
[5] S. Abidaryan, A. H. Behravesh, M. Barmouz, S. K. Hedayati, Effect of infill percentage and raster angle in fused deposition modeling (FDM) process on shape memory properties of poly (lactic acid) and comparison with compression molding, Iranian Journal of Manufacturing Engineering, Vol. 7, No. 5, pp. 14-23, 2020. (in Persian)
[6] G. S. Sandhu, K. S. Boparai, K. S. Sandhu, Influence of slicing parameters on selected mechanical properties of fused deposition modeling prints, Materials Today: Proceedings, Vol. 48, No. 5, pp. 1378-1382, 2022, doi: 10.1016/j.matpr.2021.09.118.
[7] N. Vinoth Babu, N. Venkateshwaran, N. Rajini, S. O. Ismail, F. Mohammad, H. A. Al-Lohedan, S. Suchart, Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique, Materials Technology, Vol. 37, No.9, pp. 1008-1025, 2022, doi: 10.1080/10667857.2021.1915056.
[8] V. D. Prasada Rao, P. Rajiv, V. Navya Geethika, Effect of fused deposition modelling (FDM) process parameters on tensile strength of carbon fibre PLA, Materials Today: Proceedings, Vol. 18, No. 6, pp. 2012-2018, 2019, doi: 10.1016/j.matpr.2019.06.009.
[9] N. Naveed, Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM), Materials Technology, Vol. 36, No.5, pp. 317-330, 2021, doi: 10.1080/10667857.2020.1758475.
[10] C. M. S. Vicente, T.S. Martins, M. Leite, A. Ribeiro, L. Reis, Influence of fused deposition modeling parameters on the mechanical properties of ABS parts. Polymers for Advanced Technologies, Vol. 31, pp. 501– 507, 2020, doi: 10.1002/pat.4787.
[11] P. Rezaeian, M. R. Ayatollahi, A. Nabavi-Kivi, S. M. J. Razavi, Effect of printing speed on tensile and fracture behavior of ABS specimens produced by fused deposition modeling, Engineering Fracture Mechanics, Vol. 266, pp. 108393, 2022, doi: 10.1016/j.engfracmech.2022.108393.
[12] H. B. Mamo, A. D. Tura, A. Johnson Santhosh, N. Ashok, Dommeti Kamalakara Rao, Modeling and analysis of flexural strength with fuzzy logic technique for a fused deposition modeling ABS components, Materials Today: Proceedings, Vol. 57, No. 2, pp. 768-774, 2022, doi: 10.1016/j.matpr.2022.02.306.
[13] A. D. Tura, H. G. Lemu, H. B. Mamo, Experimental investigation and prediction of mechanical properties in a fused deposition modeling process. Crystals, Vol. 12, No. 6, pp. 844, 2022, doi: 10.3390/cryst12060844.
[14] K. M. Agarwal, P. Shubham, D. Bhatia, P. Sharma, H. Vaid, R. Vajpeyi, Analyzing the impact of print parameters on dimensional variation of ABS specimens printed using fused deposition modelling (FDM), Sensors International, Vol. 3, pp. 100149, 2022, doi: 10.1016/j.sintl.2021.100149.
[15] M. Azadi, A. Dadashi, S. Dezianian, M. Kianifar, S. Torkaman, M. Chiyani, High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing, Forces in Mechanics, Vol. 3, pp. 100016, 2021, doi: 10.1016/j.finmec.2021.100016.
[16] R. Raj Mohan, R. Venkatraman, S. Raghuraman, Experimental analysis on density, micro-hardness, surface roughness and processing time of Acrylonitrile Butadiene Styrene (ABS) through fused deposition modeling (FDM) using Box Behnken design (BBD), Materials Today Communications, Vol. 27, pp. 102353, 2021, doi: 10.1016/j.mtcomm.2021.102353.
[17] M. Lay, N. L. N. Thajudin, Z. A. Abdul Hamid, A. Rusli, M. K. Abdullah, R. K. Shuib, Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding, Composites Part B: Engineering, Vol. 176, pp. 107341, 2019, doi: 10.1016/j.compositesb.2019.107341.
[18] R. Srinivasan, R. Rathish, P. R. Sivaraman, A. Pramod, G. Shivaganesh, Influential analysis of fused deposition modeling process parameters on the wear behaviour of ABS parts, Materials Today: Proceedings, Vol. 27, No. 2, pp. 1869-1876, 2020, doi: 10.1016/j.matpr.2020.03.808.
[19] M. Faes, E. Ferraris, D. Moens, Influence of inter-layer cooling time on the quasi-static properties of ABS components produced via fused deposition modelling, Procedia CIRP, Vol. 42, pp. 748-753, 2016, doi: 10.1016/j.procir.2016.02.313.
[20] I. Khan, N. Kumar, Fused deposition modelling process parameters influence on the mechanical properties of ABS: A review, Materials Today: Proceedings, Vol. 44, No. 6, 2021, pp. 4004-4008, doi: 10.1016/j.matpr.2020.10.202.
[21] S. Paul, Finite element analysis in fused deposition modeling research: A literature review, Measurement, Vol. 178, pp. 109320, 2021, doi: 10.1016/j.measurement. 2021.109320.
[22] A. Cano-Vicent, M. M. Tambuwala, Sk. S. Hassan, D. Barh, A. A. A. Aljabali, M. Birkett, A. Arjunan, Á. Serrano-Aroca, Fused deposition modelling: current status, methodology, applications and future prospects, Additive Manufacturing, Vol. 47, pp. 102378, 2021, doi: 10.1016/j.addma.2021.102378.
[23] ASTM D638-14, Standard test method for tensile properties of plastics, American Society for Testing and Materials: West Conshohocken, 2012.
[24] C. Z. Zhao, W. Q. Huang, J. X. Liu, P. R. Ren, Z. X. Zuo, K. J. Yan, An investigation on tensile and fatigue properties of cast Al-7Si-1.5Cu alloy applied in cylinder head considering size effect phenomenon, Materials Today Communications, Vol. 31, pp. 103271, 2022, doi: 10.1016/j.mtcomm.2022.103271.
[25] A. V. Sergueeva, J. Zhou, B. E. Meacham, D. J. Branagan, Gage length and sample size effect on measured properties during tensile testing, Materials Science and Engineering: A, Vol. 526, pp. 79-83, 2009, doi: 10.1016/j.msea.2009.07.046.
[26] F. A. Marandi, A. H. Jabbari, M. Sedighi, R. Hashemi, An experimental, analytical, and numerical investigation of hydraulic bulge test in two-layer Al–Cu sheets, ASME. Journal of Manufacturing Science and Engineering, Vol. 139, pp. 031005, 2017, doi:10.1115/1.4034717.
[27] Y. Hou, W. Zhang, X. Mi, H. Xie, X. Feng, G. Huang, L. Peng, Z. Yang, Different response mechanisms of yield strength and ultimate tensile strength in pure copper considering size effect, Materials Science and Engineering: A, Vol. 849, pp. 143443, 2022, doi: 10.1016/j.msea.2022.143443.