Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Keyword Index
A
  • AA6061 alloy Effect of aging treatment on the work hardening behavior of AA6061 alloy [Volume 12, Issue 6, 2025, Pages 31-41]
  • Acrylonitrile Butadiene Styrene Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture [Volume 12, Issue 1, 2025, Pages 1-13]
  • Additive Manufacturing Experimental study of the effect of 3D printing parameters and annealing process on the specific energy absorption of porous structures with interconnected pores fabricated of polylactic acid and 3D printed by fused deposition modeling method [Volume 12, Issue 2, 2025, Pages 18-29]
  • Additive Manufacturing Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
  • Additive Manufacturing Investigating the compressive strength of parts manufactured using the FDM method in a corrosive salt environment [Volume 12, Issue 4, 2025, Pages 76-86]
  • Additive Manufacturing Using wavelet transform and vibration mode shapes to identify crack defect in additively manufactured steel plate [Volume 12, Issue 6, 2025, Pages 69-87]
  • Aluminum 7075 Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
  • Annealing Experimental study of the effect of 3D printing parameters and annealing process on the specific energy absorption of porous structures with interconnected pores fabricated of polylactic acid and 3D printed by fused deposition modeling method [Volume 12, Issue 2, 2025, Pages 18-29]
  • Auxetic Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
  • Auxetic Structure Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
  • Auxetic textiles Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
B
  • Biodegradable materials Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
C
  • Carbon Nanotube Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
  • Castigliano's Theorem Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
  • Cement composite Experimental Study of cement-layered double hydroxide (LDH) composites [Volume 12, Issue 3, 2025, Pages 30-37]
  • CJ Analysis Effect of aging treatment on the work hardening behavior of AA6061 alloy [Volume 12, Issue 6, 2025, Pages 31-41]
  • Classification Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
  • Cold wire drawing Investigation of the effect of inter-pass annealing heat treatment and lubricant on the cold drawing behavior of Inconel X750 superalloy during cold wire drawing process [Volume 12, Issue 6, 2025, Pages 1-18]
  • Compaction Behavior of Fiber Bed Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
  • Composite Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
  • Composite grid structures Development of a four-degree-of-freedom filament winding machine for manufacturing composite grid structures [Volume 12, Issue 3, 2025, Pages 38-44]
  • Composite Material Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture [Volume 12, Issue 1, 2025, Pages 1-13]
  • Composite patch Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
  • Compression spring Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
  • Concentrator Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
  • Cork agglomerate Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
  • Corrosion Resistance Corrosion behavior investigation of 7075 aluminum alloy processed by surface mechanical attrition treatment [Volume 12, Issue 7, 2025, Pages 1-17]
  • Crashworthiness Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications [Volume 12, Issue 6, 2025, Pages 19-30]
  • Curing condition optimization Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
D
  • Damage Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
  • Delamination The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
  • Design criterion The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
  • Dimensional Accuracy The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
  • Dissimilar Metals Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
  • Drilling The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
  • Drilling, Fiber-Metal-Polymer Composite, Fiber Delamination, Surface Quality Effect of drilling parameters on fiber delamination, surface quality, and drilling force in curved luminum/Glass/Polypropylene composite [Volume 12, Issue 7, 2025, Pages 81-95]
  • Duplex structure Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
  • Dynamic recrystallization Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
E
  • Elastic modulus Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
  • Electrical conductivity Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
  • Energy absorption Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
  • Energy absorption Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications [Volume 12, Issue 6, 2025, Pages 19-30]
  • Energy losses Analysis and evaluation of energy losses in a hydraulic motor with a gear structure under different working conditions [Volume 12, Issue 4, 2025, Pages 1-15]
  • Experimental Evaluation Analysis and evaluation of energy losses in a hydraulic motor with a gear structure under different working conditions [Volume 12, Issue 4, 2025, Pages 1-15]
F
  • Fatigue Crack Growth Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
  • Fault Diagnosis Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
  • Finite Element Suspension System Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
  • Flower pattern design The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
  • Flow forming Experimental study of the flow forming process of grooved copper-aluminum bi-layer tubes and investigation of the separation force between the two layers [Volume 12, Issue 2, 2025, Pages 44-58]
  • Force on the Rollers The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
  • Forming Limit Diagram Experimental comparison of the forming limit diagram in hot incremental forming and ultrasonic vibration assisted hot incremental forming on Ti-6AL-4V alloy [Volume 12, Issue 1, 2025, Pages 14-28]
  • Four-Point Bending Test Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
  • Fracture mechanics Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture [Volume 12, Issue 1, 2025, Pages 1-13]
  • Friction Stir Process Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
  • Friction Stir Welding, Polyamide Sheets, Tensile Test, Strain Rate, Strength Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
  • Friction test The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
G
  • Genetic Algorithm Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
  • Glass Fiber Composites The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
  • Glass fibers Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture [Volume 12, Issue 1, 2025, Pages 1-13]
H
  • Hardness Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
  • Hardness test Corrosion behavior investigation of 7075 aluminum alloy processed by surface mechanical attrition treatment [Volume 12, Issue 7, 2025, Pages 1-17]
  • Heat Affected Zone (HAZ) Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
  • Heat treatment In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
  • Helical spring Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
  • Hot caliber rolling Investigation of the effect of inter-pass annealing heat treatment and lubricant on the cold drawing behavior of Inconel X750 superalloy during cold wire drawing process [Volume 12, Issue 6, 2025, Pages 1-18]
  • Hot deformation Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
  • Hot Incremental Forming Experimental comparison of the forming limit diagram in hot incremental forming and ultrasonic vibration assisted hot incremental forming on Ti-6AL-4V alloy [Volume 12, Issue 1, 2025, Pages 14-28]
  • Hydraulic Brake Mechanism Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
  • Hydraulic Motor Analysis and evaluation of energy losses in a hydraulic motor with a gear structure under different working conditions [Volume 12, Issue 4, 2025, Pages 1-15]
I
  • Impact Energy Absorption Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
  • Inconel X750 superalloy Investigation of the effect of inter-pass annealing heat treatment and lubricant on the cold drawing behavior of Inconel X750 superalloy during cold wire drawing process [Volume 12, Issue 6, 2025, Pages 1-18]
  • In-situ Alloying In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
  • Iran Fanarlool Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
L
  • Laser Powder Bed Fusion In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
  • Layered Double Hydroxide (LDH) Experimental Study of cement-layered double hydroxide (LDH) composites [Volume 12, Issue 3, 2025, Pages 30-37]
  • Limited Slip Differential Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
  • Low-carbon St14 steel Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
M
  • Machine Learning Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
  • Machining Parameters The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
  • Mechanical properties In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
  • Mechanical seal The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
  • Microscopic survey Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
  • Microstructure The effect of Nd:YAG laser welding pulse duration on the corrosion behavior of 316L steel in sulfuric acid [Volume 12, Issue 5, 2025, Pages 11-19]
  • Modal defect detection Using wavelet transform and vibration mode shapes to identify crack defect in additively manufactured steel plate [Volume 12, Issue 6, 2025, Pages 69-87]
  • Modal Parameters Operational modal analysis of thin plates using non-contact excitation and uncertainty quantification of extracted parameters [Volume 12, Issue 2, 2025, Pages 1-17]
  • MoS2 Investigation of the effect of inter-pass annealing heat treatment and lubricant on the cold drawing behavior of Inconel X750 superalloy during cold wire drawing process [Volume 12, Issue 6, 2025, Pages 1-18]
N
  • Nanocomposites Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
  • Nd:YAG Laser Welding The effect of Nd:YAG laser welding pulse duration on the corrosion behavior of 316L steel in sulfuric acid [Volume 12, Issue 5, 2025, Pages 11-19]
  • Negative Poisson’s Ratio Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
  • Non-contact Excitation Operational modal analysis of thin plates using non-contact excitation and uncertainty quantification of extracted parameters [Volume 12, Issue 2, 2025, Pages 1-17]
O
  • Operational modal analysis Operational modal analysis of thin plates using non-contact excitation and uncertainty quantification of extracted parameters [Volume 12, Issue 2, 2025, Pages 1-17]
P
  • Permeability Measurement Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
  • Polymers Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications [Volume 12, Issue 6, 2025, Pages 19-30]
  • Polypropylene, Acrylonitrile Butadiene Rubber, Silicon Carbide, Nanocomposite, Response Surface Methodology Investigate of the mechanical properties of PP/NBR/SiC nanocomposite in the presence of PP-g-MA compatibilizer for optimizing the modulus of elasticity and impact resistance [Volume 12, Issue 7, 2025, Pages 31-48]
  • Powertrain Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
Q
  • Quasi-static indentation Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
R
  • Radial-Backward Extrusion, 70-30 Brass, Cold Forming, Friction Coefficient Investigating the feasibility of producing flanged axial brass parts using the radial-backward extrusion method [Volume 12, Issue 7, 2025, Pages 49-63]
  • Radial Bearing Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
  • Repair Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
  • Reshaping of cold roll forming The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
  • Roller screw Design and performance analysis of integrated roller bearing and roller screw mechanism for precision linear motion [Volume 12, Issue 2, 2025, Pages 59-69]
  • Roller screw bearing Design and performance analysis of integrated roller bearing and roller screw mechanism for precision linear motion [Volume 12, Issue 2, 2025, Pages 59-69]
  • Rotary Friction Welding Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
S
  • Sandwich Panel Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
  • Sandwich Panel Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
  • Saturated Permeability Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
  • Sheet metal bending Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
  • Silicon carbide Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
  • Specific energy absorption Experimental study of the effect of 3D printing parameters and annealing process on the specific energy absorption of porous structures with interconnected pores fabricated of polylactic acid and 3D printed by fused deposition modeling method [Volume 12, Issue 2, 2025, Pages 18-29]
  • Springback Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
  • Strain rate sensitivity Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
  • Strength Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
  • Strength Investigating the compressive strength of parts manufactured using the FDM method in a corrosive salt environment [Volume 12, Issue 4, 2025, Pages 76-86]
  • Strength Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
T
  • Tensile shear test Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
  • Tensile test Effect of aging treatment on the work hardening behavior of AA6061 alloy [Volume 12, Issue 6, 2025, Pages 31-41]
  • Textured surface density The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
  • Texture geometry The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
  • Theoretical equations Finite element analysis of the axial vibration effect on forging process [Volume 12, Issue 5, 2025, Pages 37-46]
  • Thermoplastic Elastomer Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
  • Thin-walled Tubes Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications [Volume 12, Issue 6, 2025, Pages 19-30]
  • Three-point Bending Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
  • Ti-48Al-2Cr-2Nb Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
  • Ti-6Al-4V Experimental comparison of the forming limit diagram in hot incremental forming and ultrasonic vibration assisted hot incremental forming on Ti-6AL-4V alloy [Volume 12, Issue 1, 2025, Pages 14-28]
  • Topology optimization Design and analysis of optimized mechanical structures using topology optimization and 3D printing [Volume 12, Issue 5, 2025, Pages 47-56]
  • Tribology Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
U
V
  • Vacuum Infusion Process Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
  • Vehicle Dynamic Stability Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
  • Vibrational forming Finite element analysis of the axial vibration effect on forging process [Volume 12, Issue 5, 2025, Pages 37-46]
  • Vibration mode shapes Using wavelet transform and vibration mode shapes to identify crack defect in additively manufactured steel plate [Volume 12, Issue 6, 2025, Pages 69-87]
  • Visco-plasticity Finite element analysis of the axial vibration effect on forging process [Volume 12, Issue 5, 2025, Pages 37-46]
W
  • Weld-bonded joint Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
  • Wheel Slip Control Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]