Abedian, Ali Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
Aghazadeh, Shiva Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
Ahmadi, Hamed Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
Ahmadzadeh, Sohrab Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
Akbari Mousavi, Seyed Ali Asghar The effect of Nd:YAG laser welding pulse duration on the corrosion behavior of 316L steel in sulfuric acid [Volume 12, Issue 5, 2025, Pages 11-19]
Akhoundi, Behnam Experimental study of the effect of 3D printing parameters and annealing process on the specific energy absorption of porous structures with interconnected pores fabricated of polylactic acid and 3D printed by fused deposition modeling method [Volume 12, Issue 2, 2025, Pages 18-29]
Alinejad, Javad Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
Alinejad, Reza The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
Alinezhad Aghdam, Shirzad Investigating the compressive strength of parts manufactured using the FDM method in a corrosive salt environment [Volume 12, Issue 4, 2025, Pages 76-86]
Alipour Layin, Mojtaba Experimental study of the flow forming process of grooved copper-aluminum bi-layer tubes and investigation of the separation force between the two layers [Volume 12, Issue 2, 2025, Pages 44-58]
Alitavoli, Majid Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
Amini, Saeed Experimental comparison of the forming limit diagram in hot incremental forming and ultrasonic vibration assisted hot incremental forming on Ti-6AL-4V alloy [Volume 12, Issue 1, 2025, Pages 14-28]
Amohaji, Hirad Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
Ansari, Mehdi The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
Ansari, Mehdi Effect of drilling parameters on fiber delamination, surface quality, and drilling force in curved luminum/Glass/Polypropylene composite [Volume 12, Issue 7, 2025, Pages 81-95]
Arzandeh, Hosein The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
Ashouri Pashaki, Mahyar Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
Ashrafi, Amir Experimental study of the flow forming process of grooved copper-aluminum bi-layer tubes and investigation of the separation force between the two layers [Volume 12, Issue 2, 2025, Pages 44-58]
Askarinejad, Azadeh Experimental Study of cement-layered double hydroxide (LDH) composites [Volume 12, Issue 3, 2025, Pages 30-37]
Azarafza, Reza Using wavelet transform and vibration mode shapes to identify crack defect in additively manufactured steel plate [Volume 12, Issue 6, 2025, Pages 69-87]
Azimpour Shishevan, Farzin Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
B
Badrossamay, Mohsen In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
Bani Mostafa Arab, Nasrollah Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
Baraheni, Mohammad The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
Barkat, Masood Using wavelet transform and vibration mode shapes to identify crack defect in additively manufactured steel plate [Volume 12, Issue 6, 2025, Pages 69-87]
Beyranvand, Ramin Effect of drilling parameters on fiber delamination, surface quality, and drilling force in curved luminum/Glass/Polypropylene composite [Volume 12, Issue 7, 2025, Pages 81-95]
D
Dadgar Asl, Yaghoub Finite element analysis of the axial vibration effect on forging process [Volume 12, Issue 5, 2025, Pages 37-46]
Dehghani, Amirsalar Investigation of the effect of inter-pass annealing heat treatment and lubricant on the cold drawing behavior of Inconel X750 superalloy during cold wire drawing process [Volume 12, Issue 6, 2025, Pages 1-18]
Deilami Azodi, Hamed Effect of drilling parameters on fiber delamination, surface quality, and drilling force in curved luminum/Glass/Polypropylene composite [Volume 12, Issue 7, 2025, Pages 81-95]
Ebrahimian, Mohammad Reza Investigating the compressive strength of parts manufactured using the FDM method in a corrosive salt environment [Volume 12, Issue 4, 2025, Pages 76-86]
F
Farahnakian, Masoud The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
Farrokhabadi, Amin Design and analysis of optimized mechanical structures using topology optimization and 3D printing [Volume 12, Issue 5, 2025, Pages 47-56]
Fereyduni, Fatemeh The role of drilling parameters in controlling delamination and hole quality of novel long-fiber PLA-glass composites manufactured by FDM [Volume 12, Issue 1, 2025, Pages 51-64]
G
Gerami, Ahmad Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
Gerdooei, Mahdi Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
Ghaffarzadeh, Saeid Development of a four-degree-of-freedom filament winding machine for manufacturing composite grid structures [Volume 12, Issue 3, 2025, Pages 38-44]
Ghasemi Zavaragh, Hadi Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
H
Habibvand, Maedeh Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
Haddadi, Elyas Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture [Volume 12, Issue 1, 2025, Pages 1-13]
Haddadi, Elyas Investigating the feasibility of producing flanged axial brass parts using the radial-backward extrusion method [Volume 12, Issue 7, 2025, Pages 49-63]
Hajian Heidary, Mostafa Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
Hasanzadeh, Rezgar Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications [Volume 12, Issue 6, 2025, Pages 19-30]
Hoseinpour, Mohammad Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
Hosseini, Seyed Ali Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
Hosseini, Seyed Vahid Selection of optimum adhesive for weld-bond joining of St14 low carbon steel sheets using tensile shear test [Volume 12, Issue 2, 2025, Pages 30-43]
Hosseini, Shahram Design and analysis of optimized mechanical structures using topology optimization and 3D printing [Volume 12, Issue 5, 2025, Pages 47-56]
Hosseini Toudeshky, Hossein Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
J
Jafari, Danial Design and performance analysis of integrated roller bearing and roller screw mechanism for precision linear motion [Volume 12, Issue 2, 2025, Pages 59-69]
Jafari, Mohammad Milad Effect of drilling parameters on fiber delamination, surface quality, and drilling force in curved luminum/Glass/Polypropylene composite [Volume 12, Issue 7, 2025, Pages 81-95]
Jafari Vardanjani, Mehdi Experimental comparison of the forming limit diagram in hot incremental forming and ultrasonic vibration assisted hot incremental forming on Ti-6AL-4V alloy [Volume 12, Issue 1, 2025, Pages 14-28]
Jafari Vardanjani, Mehdi Finite element analysis of the axial vibration effect on forging process [Volume 12, Issue 5, 2025, Pages 37-46]
Jafarzadeh, Hossein Investigating the feasibility of producing flanged axial brass parts using the radial-backward extrusion method [Volume 12, Issue 7, 2025, Pages 49-63]
Jalali, Hossein Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
K
Karamooz Mahdiabadi, Morteza Operational modal analysis of thin plates using non-contact excitation and uncertainty quantification of extracted parameters [Volume 12, Issue 2, 2025, Pages 1-17]
Karimaei, Hadiseh Uncertain optimal design of a bio-capsule considering manufacturing and assembly tolerances uncertainty [Volume 12, Issue 7, 2025, Pages 64-80]
Kazemi, Seyyed Roohollah Experimental investigations in friction welding process of dissimilar metal parts [Volume 12, Issue 4, 2025, Pages 40-62]
Khadak, Hasan The effect of Nd:YAG laser welding pulse duration on the corrosion behavior of 316L steel in sulfuric acid [Volume 12, Issue 5, 2025, Pages 11-19]
Khodadadi, Majid Experimental study of the flow forming process of grooved copper-aluminum bi-layer tubes and investigation of the separation force between the two layers [Volume 12, Issue 2, 2025, Pages 44-58]
L
Lesani Fadafan, Mohammad Uncertain optimal design of a bio-capsule considering manufacturing and assembly tolerances uncertainty [Volume 12, Issue 7, 2025, Pages 64-80]
Liaghat, Gholam Hossein Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
M
Makhdoumi, Saber Investigate of the mechanical properties of PP/NBR/SiC nanocomposite in the presence of PP-g-MA compatibilizer for optimizing the modulus of elasticity and impact resistance [Volume 12, Issue 7, 2025, Pages 31-48]
Maleki, Ali In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
Mazdak, Siamak The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
Mirak, Alireza Investigation of the effect of inter-pass annealing heat treatment and lubricant on the cold drawing behavior of Inconel X750 superalloy during cold wire drawing process [Volume 12, Issue 6, 2025, Pages 1-18]
Mirdehghan, Seyed Abolfazl Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
Mirmahdi, Seyed Ahmad Evaluation of the mechanical behavior of the suspension spring under quasi-static loading: comparison of analytical, numerical, and experimental approaches [Volume 12, Issue 5, 2025, Pages 20-28]
Mirmohamadkhani, Ali Reza Using wavelet transform and vibration mode shapes to identify crack defect in additively manufactured steel plate [Volume 12, Issue 6, 2025, Pages 69-87]
Modanloo, Vahid Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications [Volume 12, Issue 6, 2025, Pages 19-30]
Mogharehabed, Ali In-situ alloying of Al-Cu via LPBF: Effect of heat treatment [Volume 12, Issue 5, 2025, Pages 29-36]
Mohammadi, Alireza Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
Mohammadi, Aminollah Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
Mohammadzadeh Gheshlaghi, Reza Development of a four-degree-of-freedom filament winding machine for manufacturing composite grid structures [Volume 12, Issue 3, 2025, Pages 38-44]
Momeni, Amir Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
Morakabati, Maryam Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
Moslemi Naeini, Hassan The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
Mousavi, Seyed Ali Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
N
Naderi, Ghasem Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
Nakhaei, Mohammad Reza Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
Nakhaei, Mohammad Reza Investigate of the mechanical properties of PP/NBR/SiC nanocomposite in the presence of PP-g-MA compatibilizer for optimizing the modulus of elasticity and impact resistance [Volume 12, Issue 7, 2025, Pages 31-48]
Naseh, Hassan Uncertain optimal design of a bio-capsule considering manufacturing and assembly tolerances uncertainty [Volume 12, Issue 7, 2025, Pages 64-80]
Nasiri, Mostafa Design and development of a test apparatus for concurrent measurement of in-plane permeability and compaction behavior of fiber beds [Volume 12, Issue 3, 2025, Pages 17-23]
Nazari, Romina Design and analysis of optimized mechanical structures using topology optimization and 3D printing [Volume 12, Issue 5, 2025, Pages 47-56]
Nikandish, Pezhman Analysis and evaluation of energy losses in a hydraulic motor with a gear structure under different working conditions [Volume 12, Issue 4, 2025, Pages 1-15]
Nosraty, Hooshang Comparison of energy absorption of composites reinforced with auxetic and non-auxetic weft-knitted fabrics [Volume 12, Issue 3, 2025, Pages 24-29]
P
Panahizadeh, Valiollah Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
R
Rafiee, Roham Experimental study and predicting the tensile strength of nanocomposite specimens produced with a 3D printer [Volume 12, Issue 3, 2025, Pages 1-9]
Rafierad, Iman Design and performance analysis of integrated roller bearing and roller screw mechanism for precision linear motion [Volume 12, Issue 2, 2025, Pages 59-69]
Rahimi Asiabaraki, Hossein Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
Rahmani, Farzad Investigating the compressive strength of parts manufactured using the FDM method in a corrosive salt environment [Volume 12, Issue 4, 2025, Pages 76-86]
Rahmatinejad, Bahman Design and construction of a limited slip differential device based on brake mechanism [Volume 12, Issue 4, 2025, Pages 29-39]
Rasti, Amir Design and performance analysis of integrated roller bearing and roller screw mechanism for precision linear motion [Volume 12, Issue 2, 2025, Pages 59-69]
Rasti, Amir Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
Rezaei, Armin Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
Rezaei, Hossein Investigation of the hot deformation behavior of Ti-48Al-2Cr-2Nb intermetallic with duplex initial microstructure [Volume 12, Issue 1, 2025, Pages 65-77]
Riahi, Adib The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
S
Sabouri, Hadi Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
Sabzi, Pourya Health monitoring of damage analysis of composite repair on cracked aluminum panels under fatigue loading [Volume 12, Issue 3, 2025, Pages 10-16]
Saeidi, Masoud Investigating the effect of adding silicon carbide nanoparticles on tribological properties of PA6/NBR [Volume 12, Issue 1, 2025, Pages 29-39]
Saeimi Sadigh, Mohammad Ali Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
Safi Jahanshahi, Amin Experimental study of the effect of 3D printing parameters and annealing process on the specific energy absorption of porous structures with interconnected pores fabricated of polylactic acid and 3D printed by fused deposition modeling method [Volume 12, Issue 2, 2025, Pages 18-29]
Safi Valilu, Hadi Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
Sajed, Moosa Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
Saliminia, Aref Experimental analysis of the effect of friction stir process parameters on the mechanical properties of 7075 aluminum using the Taguchi method [Volume 12, Issue 6, 2025, Pages 42-56]
Shaban Ghazani, Mehdi Effect of aging treatment on the work hardening behavior of AA6061 alloy [Volume 12, Issue 6, 2025, Pages 31-41]
Shahrajabian, Hamzeh The effect of surface texture geometry on the frictional behavior of graphite mechanical seals [Volume 12, Issue 6, 2025, Pages 57-68]
Shameli, Moharram Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture [Volume 12, Issue 1, 2025, Pages 1-13]
Shameli, Moharram Investigating the feasibility of producing flanged axial brass parts using the radial-backward extrusion method [Volume 12, Issue 7, 2025, Pages 49-63]
Shokrollahi, Hassan Experimental investigation of bending behavior of sandwich structures with auxetic core made of biodegradable materials [Volume 12, Issue 4, 2025, Pages 63-75]
Soltani Barcheloei, Sourosh Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
Soorani Yancheshmeh, Erfan Experimental investigation of ultrasonic vibrations' effect on springback in sheet metal bending process [Volume 12, Issue 2, 2025, Pages 70-81]
T
Tajdari, Mehdi The effect of the flower pattern on the applied force on the Rollers in the reshaping of cold roll forming process [Volume 12, Issue 1, 2025, Pages 40-50]
Tavoosi, Vahid Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets [Volume 12, Issue 7, 2025, Pages 18-30]
U
Ustad, Mehdi Fault diagnosis radial bearing mounted on shaft using classification with audio spectrogram and convolutional neural network [Volume 12, Issue 5, 2025, Pages 1-10]
V
Vahidi, Hadi Behavior of sandwich panels with expanded cork agglomerate cores under quasi-Static indentation and three-point bending [Volume 12, Issue 4, 2025, Pages 16-28]
Z
Zaheri, Marie Operational modal analysis of thin plates using non-contact excitation and uncertainty quantification of extracted parameters [Volume 12, Issue 2, 2025, Pages 1-17]
