Keywords = Mechanical Properties
Number of Articles: 24
Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method

Articles in Press, Accepted Manuscript, Available Online from 05 February 2024

10.22034/ijme.2024.434030.1899

Arya Kazemzadeh; Ghader Faraji

Experimental study of the effects of constrained groove pressing process on AA6061 sheet

Articles in Press, Accepted Manuscript, Available Online from 13 February 2024

10.22034/ijme.2024.433980.1895

Moein Gholami; Seyyed Ehsan Eftekhari; Masoud Rakhshkhorshid

Production of aluminum-based composites from recycled chips by hot extrusion processing

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.432303.1889

Hamidreza Rezaei Ashtiani; Hossein Ehsani

Investigation of Mechanical and Thermal Properties of Continuous Metal Wire Reinforced Samples in Fused Deposition Modeling for Shape Memory Stimulus

Articles in Press, Accepted Manuscript, Available Online from 15 March 2024

10.22034/ijme.2024.434021.1898

MASOUMEH GHAEMI SARCHESHMEH; َََAmir Hossein Behravesh; seyyed kaveh hedayati

Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper

Volume 10, Issue 6, August 2023, Pages 53-64

10.22034/ijme.2023.413891.1824

Davood Afshari; Hasan Modaresinia; Moahmmad Karimi Ivanaki; Mohammad Mahdi Entezarian

Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet

Volume 10, Issue 5, July 2023, Pages 68-78

10.22034/ijme.2023.424240.1872

Alireza Jalil; Nasrollah Bani Mostafa Arab; Malek Naderi; Yaghoub Dadgar Asl

Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects

Volume 10, Issue 4, June 2023, Pages 48-61

10.22034/ijme.2023.407356.1811

Yasser Taghipour Lahijani; Ahmad Mashayekhi; Vahid Modanloo; Behnam Akhoundi; Amin Safi Jahanshahi

Investigating the mechanical behavior of the infinity structure inspired by the silkworm cocoon and comparing it with the rod structure for use in architectural cellular structures

Volume 9, Issue 6, September 2022, Pages 11-23

10.22034/ijme.2022.160938

Mostafa Hosseini Vajari; Hossein Moradi Nasab; Morteza Behzadnasab; Mahmoud Nikkhah Shahmirzadi; Majid Soltani

Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel

Volume 8, Issue 11, February 2022, Pages 16-34

Hamid Reza Shahverdi; Amirsalar Dehghani; Mohammad Zabihi Gargari; Mohammad Emami

Hydro assisted tube pressing as a new severe plastic deformation method for producing high strength tubes

Volume 7, Issue 5, July 2020, Pages 1-13

Ali Asghar Zolfaghari Darzi; Mohammad Bakhshi; Roohollah Jamaati

Microstructure and mechanical properties of AA5456/SiO2p nanocomposite fabricated by friction stir processing

Volume 7, Issue 4, June 2020, Pages 39-47

Rasoul Naderi; Mostafa Hajian Heidary; Mohsen Karimi; Alireza Ahmadi

Assessment of using the floating bobbin tool for double sided friction stir welding of aluminium

Volume 7, Issue 3, June 2020, Pages 52-62

Mohammad Ali Naziri; Amin Rabiezadeh

Fabrication of two layer Al/Cu rods using hot forward extrusion

Volume 6, Issue 4, September 2019, Pages 7-13

Hamidreza Rezaei Ashtiani; Alireza Ahari

The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite

Volume 6, Issue 1, May and June 2019, Pages 1-11

Mohammad Givi; Amir Hossein Ghasemi; Mahmoud Abbasi

Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper

Volume 6, Issue 1, May and June 2019, Pages 32-41

Mohammaad reza Shafeie; Majid Elyasi; Morteza Hosseizadeh; Hamed Aghajani Derazkola

Iranian Journal of Manufacturing Engineering

Journal Archive