Keywords = Microstructure
Number of Articles: 12
Production of aluminum-based composites from recycled chips by hot extrusion processing

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.432303.1889

Hamidreza Rezaei Ashtiani; Hossein Ehsani

Experimental study of the effects of constrained groove pressing process on AA6061 sheet

Volume 10, Issue 8, October 2023, Pages 49-59

10.22034/ijme.2024.433980.1895

Moein Gholami; Seyyed Ehsan Eftekhari Shahri; Masoud Rakhshkhorshid

The effect of bonding time on microstructure and mechanical properties of Nimonic105 super alloy brazed joint

Volume 9, Issue 6, September 2022, Pages 24-35

10.22034/ijme.2022.160939

Reza Barazandeh; Mohammad Ammar Mofid; Majid Belbasi; Mostafa Jafarzadegan; Hasan Fadaei

Investigating the microstructure variation of commercially pure titanium in hot resistance spinning

Volume 9, Issue 4, July 2022, Pages 36-46

10.22034/ijme.2022.159960

Mohsen Ghafari; Majid Elyasi; Mohammad Javad Mirnia

Improving the wear and microstructural properties of piston alloys using ZrO2 reinforcing particles

Volume 9, Issue 2, May 2022, Pages 52-59

10.22034/ijme.2022.157562

Hossein Rahimi Asiabaraki; Mostafa Akbari; Parviz Asadi

Effect of SiO2 and MoS2 nanoparticles on microstructure and wear resistance of electroless nanocomposite Ni-P-SiO2-MoS2 coating

Volume 7, Issue 9, November 2020, Pages 65-71

B. Rezaee; E. Kermani; Farid Biniyazan; S. Ejlali; Hamid Soleimanimehr

Microstructure and mechanical properties of AA5456/SiO2p nanocomposite fabricated by friction stir processing

Volume 7, Issue 4, June 2020, Pages 39-47

Rasoul Naderi; Mostafa Hajian Heidary; Mohsen Karimi; Alireza Ahmadi

Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives

Volume 6, Issue 5, September 2019, Pages 13-17

mohammad dashti germi; zahra hamidzadeh mahaseni; zohre ahmadi; mehdi shahedi asl

The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite

Volume 6, Issue 1, May and June 2019, Pages 1-11

Mohammad Givi; Amir Hossein Ghasemi; Mahmoud Abbasi

Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper

Volume 6, Issue 1, May and June 2019, Pages 32-41

Mohammaad reza Shafeie; Majid Elyasi; Morteza Hosseizadeh; Hamed Aghajani Derazkola

Iranian Journal of Manufacturing Engineering

Journal Archive