[1] M. Abeens, R. Muruganandhan, K. Thirumavalavan, Effect of Low energy laser shock peening on plastic deformation, wettability and corrosion resistance of aluminum alloy 7075 T651,
Optik, Vol. 219, pp. 165045, 2020.
https://doi.org/10.1016/j.ijleo.2020.165045
[2] B. Dhakal, S. Swaroop, Mechanical properties and deformation dependent microstructural aspects of laser shock peened 7075-T6 aluminum alloy without coating,
Materials Characterization, Vol. 183, pp. 111620, 2022.
https://doi.org/10.1016/j.matchar.2021.111620
[3] P. K. Sharp, Q. Liu, S. A. Barter, P. Baburamani, G. Clark, Fatigue life recovery in aluminium alloy aircraft structure,
Fatigue & Fracture of Engineering Materials & Structurest, Vol. 25, No. 2, pp. 99–110, 2002.
https://doi.org/10.1046/j.1460-2695.2002.00481
[4] J. Wang, Y. Lu, D. Zhou, L. Sun, L. Xie, J. Wang, Mechanical properties and microstructural response of 2A14 aluminum alloy subjected to multiple laser shock peening impacts,
Vacuum, Vol. 165, pp. 193-198, 2019.
https://doi.org/10.1016/j.vacuum.2019.03.058
[5] J. T. Wang, L. Xie, K. Y. Luo, W. S. Tan, L. Cheng, J. F. Chen, Y. L. Lu, X. P. Li, M.Z. Ge, Improving creep properties of 7075 aluminum alloy by laser shock peening,
Surface and Coatings Technology, Vol. 349, pp. 725-735, 2018.
https://doi.org/10.1016/j.surfcoat.2018.06.061
[6] J. T. Wang, Y. K. Zhang, J. F. Chen, J. Y. Zhou, K. Y. Luo, W. S. Tan, L. Y. Sun, Y. L. Lu, Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy,
Materials Science and Engineering:A, Vol. 704, pp. 459-468, 2017.
https://doi.org/10.1016/j.msea.2017.08.050
[7] R. Bikdeloo, G. H. Farrahi, A. Mehmanparast, S. M. Mahdavi, Multiple laser shock peening effects on residual stress distribution and fatigue crack growth behaviour of 316L stainless steel,
Theoretical and Applied Fracture Mechanics, Vol. 105, pp. 102429, 2020.
https://doi.org/10.1016/j.tafmec.2019.102429
[8] S. Adu-Gyamfi, X. Ren, E. A. Larson, Y. Ren, Z. Tong, The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy,
Optics & Laser Technology, Vol. 108, pp. 177-185, 2018.
https://doi.org/10.1016/j.optlastec.2018.06.036
[9] Z. Bergant, U. Trdan, J. Grum, Effects of laser shock processing on high cycle fatigue crack growth rate and fracture toughness of aluminium alloy 6082-T651,
International Journal of Fatigue, Vol. 87, pp. 444-455,2016.
https://doi.org/10.1016/j.ijfatigue.2016.02.027
[10] S. Prabhakaran, S. Kalainathan, Compound technology of manufacturing and multiple laser peening on microstructure and fatigue life of dual-phase spring steel,
Materials Science and Engineering: A, Vol. 674, pp. 634-645, 2016.
https://doi.org/10.1016/j.msea.2016.08.031
[11] D. Karthik, J. Jiang, Y. Hu, Z. Yao, Effect of multiple laser shock peening on microstructure, crystallographic texture and pitting corrosion of Aluminum-Lithium alloy 2060-T8,
Surface and Coatings Technology, Vol. 421, pp.127354, 2021.
https://doi.org/10.1016/j.surfcoat.2021.127354
[12] W. Li, H. Chen, W. Huang, J. Chen, S. An, G. Xiao, S. Zhang, Optimization of multiple laser shock peening on high-cycle fatigue performance of aluminized AISI 321 stainless steel,
International Journal of Fatigue, Vol. 153, pp. 106505, 2021.
https://doi.org/10.1016/j.ijfatigue.2021.106505
[13] X. Nie, W. He, S. Zang, X. Wang, J. Zhao, Effect study and application to improve high cycle fatigue resistance of TC11 titanium alloy by laser shock peening with multiple impacts,
Surface and Coatings Technology, Vol. 253, pp. 68-75, 2014.
https://doi.org/10.1016/j.surfcoat.2014.05.015
[14] J. Li, J. Zhou, A. Feng, S. Huang, X. Meng, Y. Sun, Y. Huang, X. Tian, Influence of multiple laser peening on vibration fatigue properties of TC6 titanium alloy,
Optics & Laser Technology, Vol. 118, pp. 183-191, 2019.
https://doi.org/10.1016/j.optlastec.2019.05.007
[15] S. Huang, J. Z. Zhou, J. Sheng, K. Y. Luo, J. Z. Lu, Z. C. Xu, X. K. Meng, L. Dai, L. D. Zuo, H. Y. Ruan, H. S. Chen, Effects of laser peening with different coverage areas on fatigue crack growth properties of 6061-T6 aluminum alloy,
International Journal of Fatigue, Vol. 47, pp. 292-299, 2013.
https://doi.org/10.1016/j.ijfatigue.2012.09.010
[16] D. Devaux, R. Fabbro, J. Virmont, Generation of shock waves by laser-matter interaction in confined geometries,
Le Journal de Physique IV, Vol. 1, pp. 179-182, 1991.
https://doi.org/10.1051/jp4:1991747
[17] R. Sun, L. Li, W. Guo, P. Peng, T. Zhai, Z. Che, B. Li, C. Guo, Y. Zhu, Laser shock peening induced fatigue crack retardation in Ti-17 titanium alloy,
Materials Science and Engineering: A, Vol. 737, pp. 94-104, 2018.
https://doi.org/10.1016/j.msea.2018.09.016
[18] J. Zhang, X. Cheng, Q. Xia, C. Yan, Strengthening effect of laser shock peening on 7075-T6 aviation aluminum alloy,
Advances in Mechanical Engineering, Vol. 12, pp. 1687814020952177, 2020.
https://doi.org/10.1177/1687814020952177
[19] B. Dhakal, S. Swaroop, Effect of laser shock peening on mechanical and microstructural aspects of 6061-T6 aluminum alloy,
Journal of materials processing technology, Vol. 282, pp. 116640, 2020.
https://doi.org/10.1016/j.jmatprotec.2020.116640
[20] X. Zhang, Y. Peng, M. Yang, Y. Du, Z. Wang, Effects of residual stress induced by laser shock peening on mixed-mode crack propagation behavior in 7075-T6 aluminum alloy panel,
Theoretical and Applied FractureMechanics, Vol. 119, pp. 103358, 2022.
https://doi.org/10.1016/j.tafmec.2022.103358
[21] X. Q. Zhang, H. Li, X. L. Yu, Y. Zhou, S. W. Duan, S. Z. Li, Z. L. Huang, L. S. Zuo, Investigation on effect of laser shock processing on fatigue crack initiation and its growth in aluminum alloy plate,
Materials & Design (1980-2015), Vol. 65, pp. 425-431, 2015.
https://doi.org/10.1016/j.matdes.2014.09.001
[22] Z. Ran, Z. Yongkang, S. Guifang, S. Xuting, L. Pu, Finite element analysis of surface roughness generated by multiple laser shock peening,
Rare metal materials and engineering, Vol. 47, pp. 33-38, 2018.
https://doi.org/10.1016/S1875-5372(18)30067-5