Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Keyword Index
A
  • AA6061-T6 Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
  • ABAQUS Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
  • ABAQUS Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
  • Additive Manufacturing Statistical analysis and optimization of friction stir additive manufacturing process variables for aluminum silicon carbide nanocomposite using the response surface method [Volume 10, Issue 11, 2023, Pages 24-38]
  • Additive Manufacturing Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
  • Additive Manufacturing Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
  • Additive Manufacturing Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
  • Advanced high strength steel (AHSS) Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
  • Al 7075 Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
  • Aluminum Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
  • Aluminum 6061-T6 Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061 [Volume 10, Issue 7, 2023, Pages 26-35]
  • Aluminum 7075 Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
  • Aluminum alloy 6061 sheet Experimental study of the effects of constrained groove pressing process on AA6061 sheet [Volume 10, Issue 8, 2023, Pages 49-59]
  • Aluminum based composite Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2023, Pages 28-38]
  • AM60 magnesium alloy Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2023, Pages 1-18]
  • ANFIS The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2023, Pages 49-60]
  • ANFIS-GA The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2023, Pages 49-60]
  • Arduino board Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle [Volume 10, Issue 9, 2023, Pages 1-10]
  • Artificial Bee Colony Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
B
  • Bilayer Sheet Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
  • Bio-composite Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
  • Biofilm Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling [Volume 10, Issue 9, 2023, Pages 11-18]
  • Body Implant The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
  • Bone tissue engineering Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
  • Branch Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
C
  • Calibration Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications [Volume 10, Issue 7, 2023, Pages 45-56]
  • Carbon Fiber composite Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
  • Carbon Fibers Reinforced Composite Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
  • Cavitation Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling [Volume 10, Issue 9, 2023, Pages 11-18]
  • Cellular Automaton (CA) Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2023, Pages 1-18]
  • Channel and curvature angles Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
  • Channel Depth Investigating the effect of flexible forming process variables on the uniformity of thickness distribution in U-Shaped Micro-channels [Volume 10, Issue 2, 2023, Pages 41-48]
  • Check valve Analysis and investigation of the characteristics of the flow and the force on the poppet including the edge of the flow deviation in the hydraulic check valve [Volume 10, Issue 11, 2023, Pages 1-15]
  • CHIP Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
  • Chip formation Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
  • Chromium nanobeam Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
  • CK45 steel Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
  • CK45 steel Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
  • C.N.C Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2023, Pages 1-12]
  • Coating Thickness The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
  • Cold roll forming process Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2023, Pages 61-76]
  • Composite Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
  • Composite Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
  • Composite Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2023, Pages 16-23]
  • Composited nanoparticles Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
  • Composites Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
  • Composite sandwich panel Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2023, Pages 39-52]
  • Compressive strength Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
  • COMSOL Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling [Volume 10, Issue 9, 2023, Pages 11-18]
  • Continuous glass fibers Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2023, Pages 16-23]
  • Continuous metal wire Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
  • Coordinate Transformation Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle [Volume 10, Issue 9, 2023, Pages 1-10]
  • Cored diamond tool Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
  • Crack Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
  • Crushing Force Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
  • Curved Surfaces Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2023, Pages 16-23]
  • Cyclic extrusion and compression Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2023, Pages 1-18]
D
  • Damage Criterion Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
  • Damage Mechanism Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2023, Pages 39-52]
  • Defects Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
  • Deflection Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
  • Deformation index Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
  • Delamination Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
  • Delamination An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
  • Delta-Trip steel Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
  • Deposition Geometry Control Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
  • Design of Step Amplifiers Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
  • Dielectric Constant Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
  • Dielectrophoresis Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2023, Pages 13-27]
  • Digital Light Processing Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
  • Dimensional Tolerance Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
  • Directed Energy Deposition Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
  • Displacement Volume Presenting the mathematical model of the variable flow rate axial piston pump with the displacement control valve [Volume 10, Issue 4, 2023, Pages 1-16]
  • Dissimilar Joints The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
  • Double-layered tube Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
  • Drilling Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
  • Drill Tip Angle The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
E
  • Effective strain Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
  • Electrical Resistance Hot Spinning Thermal analysis of hot spinning of commercially pure titanium by resistance heating [Volume 10, Issue 10, 2023, Pages 43-58]
  • Electrochemical Deburring Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
  • Electro Plastic Effect Experimental investigation of electro plastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test [Volume 10, Issue 7, 2023, Pages 1-9]
  • Energy absorption Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
  • Energy absorption Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
  • Energy to Weight Ratio Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
  • Experimental analysis Analysis and investigation of the characteristics of the flow and the force on the poppet including the edge of the flow deviation in the hydraulic check valve [Volume 10, Issue 11, 2023, Pages 1-15]
  • Experimental test Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2023, Pages 39-52]
  • Extrusion foam Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
F
  • Fatigue failure The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
  • FDM Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
  • FEM Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2023, Pages 1-18]
  • FEM The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
  • Femoral Neck Fracture The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
  • Fiber Orientation Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
  • Fine blanking Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2023, Pages 66-75]
  • Finite Element Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
  • Finite Element Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
  • Finite element method Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
  • Finite element method Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method [Volume 10, Issue 8, 2023, Pages 20-26]
  • Finite element method (FEM) Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
  • Finite element method (FEM) Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
  • Finite elements The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
  • Finite element simulation Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
  • Finite element simulation Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
  • Finite element simulation Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
  • Finite element simulation Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2023, Pages 66-75]
  • Flexural properties Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
  • Formability index Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
  • Fracture fixation The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
  • Friction stir spot welding Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
  • FSP Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
  • Fuel Flow Balancing Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2023, Pages 39-48]
  • Fuel Vessel Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
  • Fused deposition modeling (FDM) The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
  • Fused Filament Fabrication Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2023, Pages 16-23]
G
  • Galvanized Steel Sheet The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
  • Gas turbine Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2023, Pages 39-48]
  • GE-F9 Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2023, Pages 39-48]
  • Glass Fiber Composite Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
  • Glass fibers Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
  • Gradient temperature rolling Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
  • GRBL Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle [Volume 10, Issue 9, 2023, Pages 1-10]
  • Green synthesized Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
  • Grey Relational Analysis Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
  • Grinding Process Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
H
  • Hardness Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061 [Volume 10, Issue 7, 2023, Pages 26-35]
  • Hardness Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
  • Heat Transformation Conduction Thermal analysis of hot spinning of commercially pure titanium by resistance heating [Volume 10, Issue 10, 2023, Pages 43-58]
  • Heat treated Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
  • Heat treatment Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
  • Hole Expansion Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
  • Hot extrusion Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2023, Pages 28-38]
  • Hydroforming Process Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
I
  • Immersion Cooling Grinding Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
  • Impact energy High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
  • Inclination Angle Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
  • Incremental Forming Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
J
  • J-integral Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
K
  • Kenaf Fiber High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
L
  • Laser Line Scanning Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
  • Laser Polishing Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
  • Low velocity impact Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
M
  • Machine manufacturing Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
  • Magnesium The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
  • Magnesium hydroxide Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
  • Material removal rate Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
  • Maximum power consumption Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
  • Mechanical Behavior of Composite Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
  • Mechanical properties An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
  • Mechanical properties Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
  • Mechanical properties Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
  • Mechanical properties Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
  • Mechanical properties Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2023, Pages 1-15]
  • Mechanical properties Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
  • Mechanical properties Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
  • Mechanical properties Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method [Volume 10, Issue 8, 2023, Pages 20-26]
  • Mechanical properties Experimental study of the effects of constrained groove pressing process on AA6061 sheet [Volume 10, Issue 8, 2023, Pages 49-59]
  • Mechanical properties Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2023, Pages 28-38]
  • Mechanical properties Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
  • Metal forming Investigating the effect of flexible forming process variables on the uniformity of thickness distribution in U-Shaped Micro-channels [Volume 10, Issue 2, 2023, Pages 41-48]
  • Metal Forming With Electricity Experimental investigation of electro plastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test [Volume 10, Issue 7, 2023, Pages 1-9]
  • Metallic bipolar plate Investigating the effect of flexible forming process variables on the uniformity of thickness distribution in U-Shaped Micro-channels [Volume 10, Issue 2, 2023, Pages 41-48]
  • Metallic Foam Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
  • Metal Materials Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
  • Mg/Hydroxyapatite Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
  • Micropump Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications [Volume 10, Issue 7, 2023, Pages 45-56]
  • Microstructural evolution Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
  • Microstructure Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method [Volume 10, Issue 8, 2023, Pages 20-26]
  • Microstructure Experimental study of the effects of constrained groove pressing process on AA6061 sheet [Volume 10, Issue 8, 2023, Pages 49-59]
  • Microstructure Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2023, Pages 28-38]
  • Mo40 alloy steel Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
  • Moldflow Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
N
  • Nanocomposite Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
  • Nanocomposite Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
  • Nanocomposite Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2023, Pages 1-15]
  • Nanocomposite Statistical analysis and optimization of friction stir additive manufacturing process variables for aluminum silicon carbide nanocomposite using the response surface method [Volume 10, Issue 11, 2023, Pages 24-38]
  • Nozzle Layout Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2023, Pages 39-48]
  • Number of Passes Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
  • Numerical analysis Analysis and investigation of the characteristics of the flow and the force on the poppet including the edge of the flow deviation in the hydraulic check valve [Volume 10, Issue 11, 2023, Pages 1-15]
  • Numerical Control Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle [Volume 10, Issue 9, 2023, Pages 1-10]
  • Numerical Model Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
  • Numerical Solution Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
O
  • Optimal Machining Parameters Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
P
  • Plastic injection mold Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
  • PLC Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
  • Polyester-Based nanocomposites Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
  • Polyvinyl chloride Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2023, Pages 1-15]
  • Porous Structure Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
  • Protrusion height Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
  • Pump Presenting the mathematical model of the variable flow rate axial piston pump with the displacement control valve [Volume 10, Issue 4, 2023, Pages 1-16]
R
  • Radiation Thermal analysis of hot spinning of commercially pure titanium by resistance heating [Volume 10, Issue 10, 2023, Pages 43-58]
  • Recycled chips Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2023, Pages 28-38]
  • Reinforcing particles Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
  • Repair with composite fibers Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
  • Reshaping Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2023, Pages 61-76]
  • Residual Stress Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
  • Rotational Speed The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
  • Roughness Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
  • Rubber pad forming Investigating the effect of flexible forming process variables on the uniformity of thickness distribution in U-Shaped Micro-channels [Volume 10, Issue 2, 2023, Pages 41-48]
S
  • Sandwich Panel Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
  • Scaffold Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
  • Self-propelled Rotary Tool Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
  • Semi-biodegradable composite Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
  • Separation Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2023, Pages 13-27]
  • Shear Force Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores [Volume 10, Issue 7, 2023, Pages 36-44]
  • Sheet induction heating Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
  • Sheet Metal Forming Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
  • Sheet Metal Forming Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
  • Silica Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2023, Pages 53-65]
  • Simulation Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
  • Simulation Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
  • Simulation Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
  • Sperm Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2023, Pages 13-27]
  • Spindle Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2023, Pages 1-12]
  • Spot Welding Process The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
  • Spring-back Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2023, Pages 61-76]
  • Spring Back Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
  • Stainless Steels Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
  • Static analysis Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
  • Strain Path Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
  • Strain Rate An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
  • Stress Intensity Factor (SIF) Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
  • Structural properties Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
  • Surface effects Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
  • Surface Hardness Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
  • Surface Quality Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2023, Pages 66-75]
  • Surface roughness Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
  • Surface roughness Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
  • Surface roughness The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2023, Pages 49-60]
  • Surface roughness Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
T
  • Taguchi method Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
  • Temperature An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
  • Temperature Spread Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2023, Pages 39-48]
  • Texture Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
  • Thermal preloading Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
  • Thermoforming Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
  • Thermoplastic composites Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
  • Thermoplastic polymers Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2023, Pages 16-23]
  • Thermosetting composites High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
  • Thigmotaxis Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2023, Pages 13-27]
  • Thinning Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
  • Thin-walled Tubes Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
  • Three-point Bending Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
  • Three Point Bending Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2023, Pages 39-52]
  • Transformation of austenite to martensite Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
  • Trapezoidal channel cross-section Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
  • T-shape hydroforming Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
  • Tubular channel angular pressing Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
  • Turning Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
U
  • Ultrasonic hammer peening Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061 [Volume 10, Issue 7, 2023, Pages 26-35]
  • Ultrasonic machining Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
  • Ultrasonic Peening Treatment Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
  • Ultrasonic Welding Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
  • Uncertain Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2023, Pages 1-12]
  • Underframe Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
V
  • Vacuum forming Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
  • Vanadium Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
W
  • Wear resistance Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061 [Volume 10, Issue 7, 2023, Pages 26-35]
  • WEDM Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2023, Pages 17-26]
  • Welding Parameters Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
  • Wire EDM Experimental study and improving the manufacturing process of brass wire in wire-cut machining [Volume 10, Issue 5, 2023, Pages 79-91]
  • Wire Electric Discharge Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
  • Wire-tool vibration Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2023, Pages 17-26]
  • Workpiece width Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2023, Pages 17-26]