Abbasian, Abbas Investigating the effect of sodium dodecyl sulfate on microhardness changes of nickel-alumina composite coatings and pure nickel coatings [Volume 11, Issue 12, 2025, Pages 16-24]
Abedini, Rezvan Experimental study and statistical analysis of the effect of ultrasonic shot peening on the microhardness of the cross section of steel samples [Volume 11, Issue 7, 2024, Pages 46-52]
Abedini, Rezvan Experimental investigation and numerical simulation of the acoustic field of the ultrasonic cleaning transducer [Volume 11, Issue 11, 2025, Pages 1-14]
Abedini, Rezvan The effect of parameters on joint strength in continuous ultrasonic welding of polypropylene reinforced with woven glass fibers [Volume 11, Issue 10, 2025, Pages 56-65]
Abedini, Vahid Investigation of copper and chromium composite printing process using electrochemical method [Volume 11, Issue 9, 2024, Pages 40-48]
Abedini, Vahid Experimental investigation and optimization of the effect of process parameters in bone machining on bone surface quality [Volume 11, Issue 8, 2024, Pages 51-60]
Abolizadeh, Maryam Experimental investigation of printing parameters' effect on the inter-raster strength in a single layer of polylactic acid material printed by fused deposition modeling process [Volume 11, Issue 9, 2024, Pages 1-12]
Aeinehbandi, Sepehr Optimization of drilling of AA7075 metal matrix composites using response surface method [Volume 11, Issue 10, 2025, Pages 32-44]
Afshari, Davood Optimization of friction stir spot welding parameters of AA6061/Al2O3 using response surface methodology [Volume 11, Issue 8, 2024, Pages 43-50]
Ahmadi, Farshid Design and manufacture of Cyclic Expansion Extrusion (CEE) die and investigation of microstructure and strength of aluminum 1050 under the process [Volume 11, Issue 6, 2024, Pages 42-53]
Akbari, Javad Experimental and numerical study of environmental parameters' influence on the surface morphology of mesostructures fabricated by integrating additive manufacturing and electroforming processes [Volume 11, Issue 11, 2025, Pages 15-25]
Akbari, Mostafa Morphology of tensile and wear surfaces of resin / alumina nanocomposite [Volume 11, Issue 7, 2024, Pages 35-45]
Akbari, Mostafa Experimental investigation of plasma effect on mechanical properties and impact resistance of aluminum-glass epoxy composites [Volume 11, Issue 10, 2025, Pages 45-55]
Akhoundi, Behnam Experimental investigation of printing parameters' effect on the inter-raster strength in a single layer of polylactic acid material printed by fused deposition modeling process [Volume 11, Issue 9, 2024, Pages 1-12]
Alaee, Mohammad Hosein Experimental investigation of the effects of machining parameters on surface quality in turning aluminum matrix composites reinforced with Mg₂Si particles [Volume 11, Issue 9, 2024, Pages 13-25]
Alagha, Seyedeh Tina Positioning by traveling wave ultrasonic motor via input pulse amplitude [Volume 11, Issue 7, 2024, Pages 1-9]
Alirezaei, Zahra The effect of alumina addition on the mechanical properties and microstructure of aluminum matrix composite reinforced with multi-walled carbon nanotubes [Volume 11, Issue 12, 2025, Pages 25-34]
Alizadeh, Yunes Experimental investigation and numerical simulation of the acoustic field of the ultrasonic cleaning transducer [Volume 11, Issue 11, 2025, Pages 1-14]
Alizadeh Yousefi Babaki, Mahdi Experimental investigation of the role of additive manufacturing parameters on the mechanical properties of PETG parts in the FDM process [Volume 11, Issue 6, 2024, Pages 16-28]
Allahvakil, Hadi A hybrid lapping/anodizing technique for surface modification of the tungsten carbide mechanical seals used in direct reduction plant compressors of steel production industries [Volume 11, Issue 3, 2024, Pages 26-37]
Aminizadeh, Nasrin Experimental investigation of printing parameters' effect on the inter-raster strength in a single layer of polylactic acid material printed by fused deposition modeling process [Volume 11, Issue 9, 2024, Pages 1-12]
Amjadi, Morteza Virtual reality simulation of the national EF7-TC engine turbo charger assembly station: With the aim of developing capabilities in the future [Volume 11, Issue 5, 2024, Pages 13-23]
Arzandeh, Hosein Influence of the position of the center of the pipe relative to the rollers in the design of flower pattern in reshaping of cold roll forming [Volume 11, Issue 10, 2025, Pages 1-10]
Asadi, Parviz Morphology of tensile and wear surfaces of resin / alumina nanocomposite [Volume 11, Issue 7, 2024, Pages 35-45]
Askari, Ali Investigating metal injection molding of AISI-4605 low alloy steel feedstock: parametric optimization of the injection stage using RSM technique [Volume 11, Issue 3, 2024, Pages 13-25]
Azadi, Mohammad Experimental investigation and optimization of the effect of process parameters in bone machining on bone surface quality [Volume 11, Issue 8, 2024, Pages 51-60]
Azarafza, Reza Experimental investigation of the effects of machining parameters on surface quality in turning aluminum matrix composites reinforced with Mg₂Si particles [Volume 11, Issue 9, 2024, Pages 13-25]
Azdast, Taher Acoustic characterization of functionally graded porous structures parts fabricated via fused filament fabrication [Volume 11, Issue 7, 2024, Pages 27-34]
Azdast, Taher Investigating the effect of carbon dioxide and nitrogen physical foaming agents on the structural properties of extruded polyethylene polymeric foams [Volume 11, Issue 10, 2025, Pages 24-31]
B
Bagheri-Bami, Alireza An investigation of residual stress distribution in friction drilling of AA 7075 sheets by finite element modeling [Volume 11, Issue 2, 2024, Pages 20-36]
Bahramieh, Sina A novel rotary encoder based on De Bruijn sequences for highly precise automation applications [Volume 11, Issue 7, 2024, Pages 20-26]
Balali, Mostafa Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
Bamdad, Amir Hossein Determination of dynamic plastic deformation behavior of DP 590 steel [Volume 11, Issue 4, 2024, Pages 13-25]
Baseri, Hamid Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
Belbasi, Majid The effect of temper heat treatment and quench environment on the mechanical properties and microstructure of AISI 4130 to AISI 4340 steel connection by GTAW [Volume 11, Issue 1, 2024, Pages 28-38]
D
Dadgar Asl, Yaghoub Experimental and numerical evaluation of the off-time interval effect on the joint quality of AA2219 sheets in successive resistance spot welding [Volume 11, Issue 9, 2024, Pages 60-80]
Davoodi, Behnam Investigating the effect of Sr element on the wear area on the cutting tool rake surface during turning Al-Mg2Si with different percentages of Mg2Si [Volume 11, Issue 4, 2024, Pages 26-37]
Dorchepour, Ehsan Determination of dynamic plastic deformation behavior of DP 590 steel [Volume 11, Issue 4, 2024, Pages 13-25]
E
Ebadi, Sadegh Stress analysis of the railway turnout crossing using finite element method and life estimation with multi-axial fatigue criteria [Volume 11, Issue 11, 2025, Pages 52-66]
Ebrahimi, Hadi Presenting a new approach to reduce the spring-back angle of annealed copper sheets [Volume 11, Issue 3, 2024, Pages 38-50]
Ebrahimi Bavili, Hassan Microstructure and mechanical properties of AA 2024/AA 7072/AA 2024 multilayer composites prepared by accumulative roll bonding [Volume 11, Issue 4, 2024, Pages 72-86]
Ehsani Nezhad, Ali 3D printing of voxel-based structures by direct creation of STL file format [Volume 11, Issue 6, 2024, Pages 29-41]
Eidi, Hossein The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050 [Volume 11, Issue 1, 2024, Pages 15-27]
Elyasi, Majid Experimental investigation of AA6061 sheet metal deformation strategy for flange edge forming using single point incremental forming process [Volume 11, Issue 6, 2024, Pages 66-77]
Entezarian, Mohammad Mahdi Optimization of friction stir spot welding parameters of AA6061/Al2O3 using response surface methodology [Volume 11, Issue 8, 2024, Pages 43-50]
Eslami, Mohammad Hossein Temperature and surface quality investigation in orthogonal machining of cortical bone using response surface method and sensitivity analysis [Volume 11, Issue 12, 2025, Pages 64-78]
F
Fahimi Hanzaei, Amir Experimental and numerical study of environmental parameters' influence on the surface morphology of mesostructures fabricated by integrating additive manufacturing and electroforming processes [Volume 11, Issue 11, 2025, Pages 15-25]
Fallah, Mohammad Meghdad Presenting a new approach to reduce the spring-back angle of annealed copper sheets [Volume 11, Issue 3, 2024, Pages 38-50]
Fardi Ilkhchy, Ali Microstructure and mechanical properties of AA 2024/AA 7072/AA 2024 multilayer composites prepared by accumulative roll bonding [Volume 11, Issue 4, 2024, Pages 72-86]
Farrokhabadi, Amin Energy Absorption Analysis in an Auxetic Lattice Structure Using Artificial Neural Network Machine Learning and Genetic Algorithm [Volume 11, Issue 8, 2024, Pages 20-31]
Fartashvand, Vahid Experimental investigation and numerical simulation of the acoustic field of the ultrasonic cleaning transducer [Volume 11, Issue 11, 2025, Pages 1-14]
Fatemian, Maryam Implementation of direct velocity feedback using the active dynamic actuator in order to reducing chatter vibration in boring [Volume 11, Issue 6, 2024, Pages 1-15]
Feizlou, Nima Investigating the effect of carbon dioxide and nitrogen physical foaming agents on the structural properties of extruded polyethylene polymeric foams [Volume 11, Issue 10, 2025, Pages 24-31]
Foroughi, Alireza Design and manufacture of Cyclic Expansion Extrusion (CEE) die and investigation of microstructure and strength of aluminum 1050 under the process [Volume 11, Issue 6, 2024, Pages 42-53]
G
Ghalamchi, Leila Experimental analysis of the material removal rate in localized electrolysis of austenitic stainless steel in (NaCl-NaNO3) electrolyte solutions [Volume 11, Issue 12, 2025, Pages 35-42]
Ghanbari, Davood Investigating the mode II critical strain energy release rate of glass/epoxy laminated composites reinforced with polyvinyl alcohol interlayer [Volume 11, Issue 3, 2024, Pages 51-62]
Ghannadi, Noushin Energy Absorption Analysis in an Auxetic Lattice Structure Using Artificial Neural Network Machine Learning and Genetic Algorithm [Volume 11, Issue 8, 2024, Pages 20-31]
Ghasemian, Kimia Optimization of epoxy matrix manufacturing process factors by RSM/CCD method [Volume 11, Issue 10, 2025, Pages 11-23]
Ghasemi Jabal, Amirreza Optimization of drilling of AA7075 metal matrix composites using response surface method [Volume 11, Issue 10, 2025, Pages 32-44]
Ghavami Namin, Behzad Positioning by traveling wave ultrasonic motor via input pulse amplitude [Volume 11, Issue 7, 2024, Pages 1-9]
Ghazavi, Mohammad Reza Investigation of the impact of blade failure on the performance of a nonlinear bladed disk-shaft system [Volume 11, Issue 11, 2025, Pages 37-51]
Ghorbani, Hadi The effect of parameters on joint strength in continuous ultrasonic welding of polypropylene reinforced with woven glass fibers [Volume 11, Issue 10, 2025, Pages 56-65]
Ghoreishi, Majid Optimization of drilling of AA7075 metal matrix composites using response surface method [Volume 11, Issue 10, 2025, Pages 32-44]
Gorji, Hamid Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
H
Haddadi, Elyas Necessary requirements in the design and manufacturing of forklift exhaust system [Volume 11, Issue 9, 2024, Pages 49-59]
Hajialimohammadi, Alireza Investigation on dimensional and geometrical accuracy of the 3D printed intake sand core of TU5+ new engine cylinder head [Volume 11, Issue 5, 2024, Pages 1-12]
Hajialimohammadi, Alireza The effect of pre-coating porous surface cast iron cylinder of ALFIN process to create bonding with aluminum cylinder block [Volume 11, Issue 5, 2024, Pages 24-31]
Hajialimohammadi, Alireza Experimental study of the ultrasonic additive manufacturing using the aluminum and CFRP composite [Volume 11, Issue 6, 2024, Pages 54-65]
Hajiali Mohammadi, Alireza Investigation of copper and chromium composite printing process using electrochemical method [Volume 11, Issue 9, 2024, Pages 40-48]
Hasanabadi, Ali Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
Hasanabadi, Ali 3D printing of voxel-based structures by direct creation of STL file format [Volume 11, Issue 6, 2024, Pages 29-41]
Hasanifard, Mohammad Experimental investigation of the effects of machining parameters on surface quality in turning aluminum matrix composites reinforced with Mg₂Si particles [Volume 11, Issue 9, 2024, Pages 13-25]
Hasanzadeh, Rezgar Acoustic characterization of functionally graded porous structures parts fabricated via fused filament fabrication [Volume 11, Issue 7, 2024, Pages 27-34]
Hasanzadeh, Rezgar Investigating the effect of carbon dioxide and nitrogen physical foaming agents on the structural properties of extruded polyethylene polymeric foams [Volume 11, Issue 10, 2025, Pages 24-31]
Hasanzadeh, Rezgar Designing and manufacturing a novel polymeric hybrid auxetic structure using 3D printing method by combining arrow-head and missing rib structures [Volume 11, Issue 11, 2025, Pages 67-76]
Hashemi, Ramin Determination of dynamic plastic deformation behavior of DP 590 steel [Volume 11, Issue 4, 2024, Pages 13-25]
Hashemi, Ramin Detection and measurement of warping in FDM additive manufacturing process using artificial intelligence and machine vision [Volume 11, Issue 12, 2025, Pages 1-15]
Heidari, Soheila Experimental analysis of the material removal rate in localized electrolysis of austenitic stainless steel in (NaCl-NaNO3) electrolyte solutions [Volume 11, Issue 12, 2025, Pages 35-42]
Hojjat, Yousef Positioning by traveling wave ultrasonic motor via input pulse amplitude [Volume 11, Issue 7, 2024, Pages 1-9]
Honarpisheh, Mohammad An investigation of residual stress distribution in friction drilling of AA 7075 sheets by finite element modeling [Volume 11, Issue 2, 2024, Pages 20-36]
Honarvar, Farhang Measurement of attenuation coefficients of longitudinal and transverse ultrasonic waves in polymer materials using acoustic scattering [Volume 11, Issue 9, 2024, Pages 26-39]
Hosseini, Shahram Energy Absorption Analysis in an Auxetic Lattice Structure Using Artificial Neural Network Machine Learning and Genetic Algorithm [Volume 11, Issue 8, 2024, Pages 20-31]
J
Jafari, Seyed Sajad Analysis of the cylindrical shell reinforced by the carbon nanotubes under the asymmetric internal pressure [Volume 11, Issue 12, 2025, Pages 43-63]
Jafari Vardanjani, Mehdi Experimental and numerical evaluation of the off-time interval effect on the joint quality of AA2219 sheets in successive resistance spot welding [Volume 11, Issue 9, 2024, Pages 60-80]
Jafarzadeh, Hossein Fabrication and characterization of the mechanical properties of Al1050-CNT composites using accumulative channel-die compression bonding process [Volume 11, Issue 2, 2024, Pages 69-81]
Javadian, Saba Designing and manufacturing of the ultrasonic cutting tools for cutting of polymeric based composites [Volume 11, Issue 2, 2024, Pages 82-90]
Jesmani, Seyed Mohammad Investigating the effect of sodium dodecyl sulfate on microhardness changes of nickel-alumina composite coatings and pure nickel coatings [Volume 11, Issue 12, 2025, Pages 16-24]
K
Kamyab, Mohamad Investigation on dimensional and geometrical accuracy of the 3D printed intake sand core of TU5+ new engine cylinder head [Volume 11, Issue 5, 2024, Pages 1-12]
Kamyab, Mohamad The effect of pre-coating porous surface cast iron cylinder of ALFIN process to create bonding with aluminum cylinder block [Volume 11, Issue 5, 2024, Pages 24-31]
Karbasforoosh, Saeed Experimental study of the ultrasonic additive manufacturing using the aluminum and CFRP composite [Volume 11, Issue 6, 2024, Pages 54-65]
Kari, Mohammadreza Measurement of attenuation coefficients of longitudinal and transverse ultrasonic waves in polymer materials using acoustic scattering [Volume 11, Issue 9, 2024, Pages 26-39]
Karimi Beram, Ilnaz Investigating the effect of Sr element on the wear area on the cutting tool rake surface during turning Al-Mg2Si with different percentages of Mg2Si [Volume 11, Issue 4, 2024, Pages 26-37]
Karimi Firouzjaei, Mehdi Predicting the fracture behavior of 304 stainless steel thin sheet in the micro scale [Volume 11, Issue 7, 2024, Pages 10-19]
Karimi Ivanaki, Mohammad Optimization of friction stir spot welding parameters of AA6061/Al2O3 using response surface methodology [Volume 11, Issue 8, 2024, Pages 43-50]
Karkhane, Parham Temperature and surface quality investigation in orthogonal machining of cortical bone using response surface method and sensitivity analysis [Volume 11, Issue 12, 2025, Pages 64-78]
Kasaei, Mohammad Mehdi Predicting the fracture behavior of 304 stainless steel thin sheet in the micro scale [Volume 11, Issue 7, 2024, Pages 10-19]
Kashfi, Mohammad An experimental study of GLARE 2/1 and 3/2 tensile behavior using Digital Image Correlation [Volume 11, Issue 1, 2024, Pages 39-50]
Kazemi, Hossein Investigating the mode II critical strain energy release rate of glass/epoxy laminated composites reinforced with polyvinyl alcohol interlayer [Volume 11, Issue 3, 2024, Pages 51-62]
Kazemi, Mohammadali Analysis of the cylindrical shell reinforced by the carbon nanotubes under the asymmetric internal pressure [Volume 11, Issue 12, 2025, Pages 43-63]
Kazemi Nasrabadi, Mohammad Study of the effect of fumed silica on mechanical, electrical, and magnetic properties of epoxy/ fumed silica composite [Volume 11, Issue 2, 2024, Pages 37-57]
Khosravi, Mohammad Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
Kiuchi, Manabo Influence of the position of the center of the pipe relative to the rollers in the design of flower pattern in reshaping of cold roll forming [Volume 11, Issue 10, 2025, Pages 1-10]
Kolahan, Farhad Experimental and statistical analysis of pulsed Nd:YAG laser welding process for dimension optimization of connection in the AISI 316L stainless steel thin-walled tube [Volume 11, Issue 4, 2024, Pages 56-71]
M
Maghamfar, Ali Detection and measurement of warping in FDM additive manufacturing process using artificial intelligence and machine vision [Volume 11, Issue 12, 2025, Pages 1-15]
Mahdavi, Amir Modeling and optimization of variables affecting tensile properties of printed PP/Cu composite samples using LDM process [Volume 11, Issue 8, 2024, Pages 10-19]
Mahdinezhad Qazvini, Vahid The effect of drilling process parameters on thrust force in cotton phenolic composite [Volume 11, Issue 8, 2024, Pages 1-9]
Majzoobi, Gholamhossein An experimental study of GLARE 2/1 and 3/2 tensile behavior using Digital Image Correlation [Volume 11, Issue 1, 2024, Pages 39-50]
Maleki, Hossein Morphology of tensile and wear surfaces of resin / alumina nanocomposite [Volume 11, Issue 7, 2024, Pages 35-45]
Maraki, Mohammadreza The effect of drilling process parameters on thrust force in cotton phenolic composite [Volume 11, Issue 8, 2024, Pages 1-9]
Mazdak, Siamak Influence of the position of the center of the pipe relative to the rollers in the design of flower pattern in reshaping of cold roll forming [Volume 11, Issue 10, 2025, Pages 1-10]
Mehrabivaghar, Mojtaba Experimental investigation of effect of crosshead cylinder-drilling method on liner temperature of a 3-cylinder engine [Volume 11, Issue 5, 2024, Pages 32-39]
Mehrafshan, Mohammad Mahdi Optimization of drilling of AA7075 metal matrix composites using response surface method [Volume 11, Issue 10, 2025, Pages 32-44]
Mihankhah, Peyman Acoustic characterization of functionally graded porous structures parts fabricated via fused filament fabrication [Volume 11, Issue 7, 2024, Pages 27-34]
Mirnia, Mohammad Javad Predicting the fracture behavior of 304 stainless steel thin sheet in the micro scale [Volume 11, Issue 7, 2024, Pages 10-19]
Mirnia, Mohammad Javad Experimental investigation of AA6061 sheet metal deformation strategy for flange edge forming using single point incremental forming process [Volume 11, Issue 6, 2024, Pages 66-77]
MirtabaeI, Seyed Mostafa Experimental investigation of the role of additive manufacturing parameters on the mechanical properties of PETG parts in the FDM process [Volume 11, Issue 6, 2024, Pages 16-28]
Mirzaei, Mahdi The effect of pre-coating porous surface cast iron cylinder of ALFIN process to create bonding with aluminum cylinder block [Volume 11, Issue 5, 2024, Pages 24-31]
Mirzamohammadi, Sadegh Investigating the effect of polyurethane foam filling on the energy absorption of hybrid tubes with different thickness of composite layer [Volume 11, Issue 2, 2024, Pages 58-68]
Mirzamohammadi, Sadegh Investigating the effect of sodium dodecyl sulfate on microhardness changes of nickel-alumina composite coatings and pure nickel coatings [Volume 11, Issue 12, 2025, Pages 16-24]
MizabiAsl, Mehdi The effect of temper heat treatment and quench environment on the mechanical properties and microstructure of AISI 4130 to AISI 4340 steel connection by GTAW [Volume 11, Issue 1, 2024, Pages 28-38]
Mofid, Mohammad Ammar The effect of temper heat treatment and quench environment on the mechanical properties and microstructure of AISI 4130 to AISI 4340 steel connection by GTAW [Volume 11, Issue 1, 2024, Pages 28-38]
Mohammadi, Aminollah Designing and manufacturing of the ultrasonic cutting tools for cutting of polymeric based composites [Volume 11, Issue 2, 2024, Pages 82-90]
Mohammadi, Mohammad Mostafa Experimental analysis of the material removal rate in localized electrolysis of austenitic stainless steel in (NaCl-NaNO3) electrolyte solutions [Volume 11, Issue 12, 2025, Pages 35-42]
Mohammadi Jazi, Hassanali Modeling and optimization of variables affecting tensile properties of printed PP/Cu composite samples using LDM process [Volume 11, Issue 8, 2024, Pages 10-19]
Mohammadi Soleymani, Moslem The effect of filler metal on the mechanical behavior of stainless steel welded by GTAW welding [Volume 11, Issue 4, 2024, Pages 38-55]
Mohebi, Alborz An experimental study of GLARE 2/1 and 3/2 tensile behavior using Digital Image Correlation [Volume 11, Issue 1, 2024, Pages 39-50]
Mokhtari, Mohammad Experimental investigation and optimization of the effect of process parameters in bone machining on bone surface quality [Volume 11, Issue 8, 2024, Pages 51-60]
Moosavian, Ashkan Virtual reality simulation of the national EF7-TC engine turbo charger assembly station: With the aim of developing capabilities in the future [Volume 11, Issue 5, 2024, Pages 13-23]
Moosavian, Ashkan Experimental investigation of effect of crosshead cylinder-drilling method on liner temperature of a 3-cylinder engine [Volume 11, Issue 5, 2024, Pages 32-39]
Moradi, Mohammad Designing and manufacturing of the ultrasonic cutting tools for cutting of polymeric based composites [Volume 11, Issue 2, 2024, Pages 82-90]
Moradian, Milad Acoustic characterization of functionally graded porous structures parts fabricated via fused filament fabrication [Volume 11, Issue 7, 2024, Pages 27-34]
Morad Sheikhi, Mohammad The effect of alumina addition on the mechanical properties and microstructure of aluminum matrix composite reinforced with multi-walled carbon nanotubes [Volume 11, Issue 12, 2025, Pages 25-34]
Moridi, Keivan Experimental investigation of AA6061 sheet metal deformation strategy for flange edge forming using single point incremental forming process [Volume 11, Issue 6, 2024, Pages 66-77]
Mosaddegh, Peiman Designing and manufacturing of the ultrasonic cutting tools for cutting of polymeric based composites [Volume 11, Issue 2, 2024, Pages 82-90]
Moslemi Naeini, Hasan Predicting the fracture behavior of 304 stainless steel thin sheet in the micro scale [Volume 11, Issue 7, 2024, Pages 10-19]
Moslemi Naeini, Hassan Influence of the position of the center of the pipe relative to the rollers in the design of flower pattern in reshaping of cold roll forming [Volume 11, Issue 10, 2025, Pages 1-10]
Mostafaei, Hosna The effect of filler metal on the mechanical behavior of stainless steel welded by GTAW welding [Volume 11, Issue 4, 2024, Pages 38-55]
Motakef Imani, Behnam Implementation of direct velocity feedback using the active dynamic actuator in order to reducing chatter vibration in boring [Volume 11, Issue 6, 2024, Pages 1-15]
Motalebi, Sajad The effect of pre-coating porous surface cast iron cylinder of ALFIN process to create bonding with aluminum cylinder block [Volume 11, Issue 5, 2024, Pages 24-31]
Mousavi, Seyed Morteza Experimental and numerical study of environmental parameters' influence on the surface morphology of mesostructures fabricated by integrating additive manufacturing and electroforming processes [Volume 11, Issue 11, 2025, Pages 15-25]
Musavi Rad, Seyed Mohammad Investigation of copper and chromium composite printing process using electrochemical method [Volume 11, Issue 9, 2024, Pages 40-48]
N
Naderَi, Aliasghar Experimental investigation of the role of additive manufacturing parameters on the mechanical properties of PETG parts in the FDM process [Volume 11, Issue 6, 2024, Pages 16-28]
Najafi, Asghar Investigation of the impact of blade failure on the performance of a nonlinear bladed disk-shaft system [Volume 11, Issue 11, 2025, Pages 37-51]
Najafi, Moslem Experimental investigation of the effects of machining parameters on surface quality in turning aluminum matrix composites reinforced with Mg₂Si particles [Volume 11, Issue 9, 2024, Pages 13-25]
Nasiri, Hossein The effect of alumina addition on the mechanical properties and microstructure of aluminum matrix composite reinforced with multi-walled carbon nanotubes [Volume 11, Issue 12, 2025, Pages 25-34]
Navidpour, Reza Acoustic characterization of functionally graded porous structures parts fabricated via fused filament fabrication [Volume 11, Issue 7, 2024, Pages 27-34]
Nejati, Mohamad Analysis of the cylindrical shell reinforced by the carbon nanotubes under the asymmetric internal pressure [Volume 11, Issue 12, 2025, Pages 43-63]
Nikandish, Pezhman Experimental study of the effect of nanoparticles produced from sugarcane bagasse charcoal (nano biochar) on the anti-wear properties of lubricants used in bearing housing of centrifugal pumps in the petrochemical industry [Volume 11, Issue 1, 2024, Pages 1-14]
Niknam, Seyed Ali Investigating the effect of Sr element on the wear area on the cutting tool rake surface during turning Al-Mg2Si with different percentages of Mg2Si [Volume 11, Issue 4, 2024, Pages 26-37]
Niknam, Seyed Ali Study the effects of cutting parameters and lubrication conditions on the fine and ultrafine particles in machining titanium-metal matrix composite (Ti-MMC) [Volume 11, Issue 3, 2024, Pages 63-70]
Niknam, Seyed Ali Developing surface roughness prediction model using deep convolutional network [Volume 11, Issue 11, 2025, Pages 26-36]
Nikravan, Alireza Experimental and statistical analysis of pulsed Nd:YAG laser welding process for dimension optimization of connection in the AISI 316L stainless steel thin-walled tube [Volume 11, Issue 4, 2024, Pages 56-71]
O
Omidi Hashjin, Amin Experimental study and statistical analysis of the effect of ultrasonic shot peening on the microhardness of the cross section of steel samples [Volume 11, Issue 7, 2024, Pages 46-52]
P
Pak, Abbas Modeling and investigation of pin geometry and vibration amplitude on the residual stress in ultrasonic hammer peening process [Volume 11, Issue 8, 2024, Pages 32-42]
ParsaFar, Reza Study of the effect of fumed silica on mechanical, electrical, and magnetic properties of epoxy/ fumed silica composite [Volume 11, Issue 2, 2024, Pages 37-57]
Parvizi, Soroush The effect of alumina addition on the mechanical properties and microstructure of aluminum matrix composite reinforced with multi-walled carbon nanotubes [Volume 11, Issue 12, 2025, Pages 25-34]
Poolaei, Zahra Estimating the magnetic field of dump valve turbocharger through acoustic measurement [Volume 11, Issue 5, 2024, Pages 49-68]
Q
Qasemi, Mahdi Temperature and surface quality investigation in orthogonal machining of cortical bone using response surface method and sensitivity analysis [Volume 11, Issue 12, 2025, Pages 64-78]
R
Raeisi Fard, Hamed Characterization of DLC nanostructure coating, created by PACVD method on steel material of the tappet and evaluation of its wear behavior [Volume 11, Issue 5, 2024, Pages 40-48]
Rahimi Asiabaraki, Hossein Investigation on dimensional and geometrical accuracy of the 3D printed intake sand core of TU5+ new engine cylinder head [Volume 11, Issue 5, 2024, Pages 1-12]
Rahimi Asiabaraki, Hossein Morphology of tensile and wear surfaces of resin / alumina nanocomposite [Volume 11, Issue 7, 2024, Pages 35-45]
Rahimi Asiabaraki, Hossein Experimental investigation of plasma effect on mechanical properties and impact resistance of aluminum-glass epoxy composites [Volume 11, Issue 10, 2025, Pages 45-55]
Rakhshkhorshid, Masoud The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050 [Volume 11, Issue 1, 2024, Pages 15-27]
Rakhshkhorshid, Masoud The effect of drilling process parameters on thrust force in cotton phenolic composite [Volume 11, Issue 8, 2024, Pages 1-9]
Ramazani, Haidar The effect of alumina addition on the mechanical properties and microstructure of aluminum matrix composite reinforced with multi-walled carbon nanotubes [Volume 11, Issue 12, 2025, Pages 25-34]
Rasti, Amir Study of surface roughness, texture, and dimensional accuracy in thread whirling of Ti6Al4V screw [Volume 11, Issue 4, 2024, Pages 1-12]
Rasti, Mohammad Characterization of DLC nanostructure coating, created by PACVD method on steel material of the tappet and evaluation of its wear behavior [Volume 11, Issue 5, 2024, Pages 40-48]
Razavi, Seyed Morteza A novel rotary encoder based on De Bruijn sequences for highly precise automation applications [Volume 11, Issue 7, 2024, Pages 20-26]
Rezaei, Sina Investigating metal injection molding of AISI-4605 low alloy steel feedstock: parametric optimization of the injection stage using RSM technique [Volume 11, Issue 3, 2024, Pages 13-25]
Rezaeian, Amirhossein Estimating the magnetic field of dump valve turbocharger through acoustic measurement [Volume 11, Issue 5, 2024, Pages 49-68]
Rezayat, Hamid reza Investigating the energy absorption of sandwich panel with aluminum core and skin under Quasi-static loading: A numerical and experimental study [Volume 11, Issue 1, 2024, Pages 61-75]
Rostami, Milad Investigating the effect of carbon dioxide and nitrogen physical foaming agents on the structural properties of extruded polyethylene polymeric foams [Volume 11, Issue 10, 2025, Pages 24-31]
S
Sabbaghi, Mostafa Stress analysis of the railway turnout crossing using finite element method and life estimation with multi-axial fatigue criteria [Volume 11, Issue 11, 2025, Pages 52-66]
Saeimi-Sadigh, Mohammad Ali Stress analysis of the railway turnout crossing using finite element method and life estimation with multi-axial fatigue criteria [Volume 11, Issue 11, 2025, Pages 52-66]
Safarbali, Ashkan Experimental investigation and numerical simulation of the acoustic field of the ultrasonic cleaning transducer [Volume 11, Issue 11, 2025, Pages 1-14]
Safi Jahanshahi, Amin Experimental investigation of the compressive strength of polylactic acid/continuous glass fiber composite material produced with an extrusion-based 3D printer using the simultaneous impregnation system of fibers and polymer [Volume 11, Issue 1, 2024, Pages 51-60]
Safi Jahanshahi, Amin Experimental investigation of printing parameters' effect on the inter-raster strength in a single layer of polylactic acid material printed by fused deposition modeling process [Volume 11, Issue 9, 2024, Pages 1-12]
Sajadi, Vajihehsadat Measurement of attenuation coefficients of longitudinal and transverse ultrasonic waves in polymer materials using acoustic scattering [Volume 11, Issue 9, 2024, Pages 26-39]
Sajed, Moosa Stress analysis of the railway turnout crossing using finite element method and life estimation with multi-axial fatigue criteria [Volume 11, Issue 11, 2025, Pages 52-66]
Salamat-Talab, Mazaher Investigating the mode II critical strain energy release rate of glass/epoxy laminated composites reinforced with polyvinyl alcohol interlayer [Volume 11, Issue 3, 2024, Pages 51-62]
Samimi, Hamed Modeling and investigation of pin geometry and vibration amplitude on the residual stress in ultrasonic hammer peening process [Volume 11, Issue 8, 2024, Pages 32-42]
Sarkhosh, Reza Study of the effect of fumed silica on mechanical, electrical, and magnetic properties of epoxy/ fumed silica composite [Volume 11, Issue 2, 2024, Pages 37-57]
Setareh, Milad Experimental study of the effect of nanoparticles produced from sugarcane bagasse charcoal (nano biochar) on the anti-wear properties of lubricants used in bearing housing of centrifugal pumps in the petrochemical industry [Volume 11, Issue 1, 2024, Pages 1-14]
Seyedkashi, Seyed Mohammad Hossein Optimization of effective parameters on ultrasonic horns in simple shear extrusion process using taguchi design of experiments [Volume 11, Issue 3, 2024, Pages 1-12]
Shaban, Mahdi Optimization of epoxy matrix manufacturing process factors by RSM/CCD method [Volume 11, Issue 10, 2025, Pages 11-23]
Shaban Ghazani, Mehdi Microstructure and mechanical properties of AA 2024/AA 7072/AA 2024 multilayer composites prepared by accumulative roll bonding [Volume 11, Issue 4, 2024, Pages 72-86]
Shafiei, Mohamad Mahdi Characterization of DLC nanostructure coating, created by PACVD method on steel material of the tappet and evaluation of its wear behavior [Volume 11, Issue 5, 2024, Pages 40-48]
Shahbazi, Mohammad Developing surface roughness prediction model using deep convolutional network [Volume 11, Issue 11, 2025, Pages 26-36]
Shahbazi, Mohammad Detection and measurement of warping in FDM additive manufacturing process using artificial intelligence and machine vision [Volume 11, Issue 12, 2025, Pages 1-15]
Shahriar, Mohammad Mahdi A novel rotary encoder based on De Bruijn sequences for highly precise automation applications [Volume 11, Issue 7, 2024, Pages 20-26]
Shalchi, Ehsan Fabrication and characterization of the mechanical properties of Al1050-CNT composites using accumulative channel-die compression bonding process [Volume 11, Issue 2, 2024, Pages 69-81]
Shameli, Moharram Fabrication and characterization of the mechanical properties of Al1050-CNT composites using accumulative channel-die compression bonding process [Volume 11, Issue 2, 2024, Pages 69-81]
Sharghi, Peyman Experimental investigation of effect of crosshead cylinder-drilling method on liner temperature of a 3-cylinder engine [Volume 11, Issue 5, 2024, Pages 32-39]
Shariati, Mahmoud Experimental and statistical analysis of pulsed Nd:YAG laser welding process for dimension optimization of connection in the AISI 316L stainless steel thin-walled tube [Volume 11, Issue 4, 2024, Pages 56-71]
Sharokhi, Ehsan Investigation on dimensional and geometrical accuracy of the 3D printed intake sand core of TU5+ new engine cylinder head [Volume 11, Issue 5, 2024, Pages 1-12]
Sheikhi, Mohammad Morad Presenting a new approach to reduce the spring-back angle of annealed copper sheets [Volume 11, Issue 3, 2024, Pages 38-50]
Sheikhi Azqandi, Mojtaba 3D printing of voxel-based structures by direct creation of STL file format [Volume 11, Issue 6, 2024, Pages 29-41]
Sokhanpardaz, Mozafar Evaluation of the microstructure and mechanical properties of dissimilar welds between AISI310 and AISI316 austenitic stainless steels by pulsed current gas tungsten arc welding (PCGTAW) [Volume 11, Issue 2, 2024, Pages 1-19]
Soleymani, Mahdi Experimental investigation and numerical simulation of the acoustic field of the ultrasonic cleaning transducer [Volume 11, Issue 11, 2025, Pages 1-14]
Songmene, Victor Study the effects of cutting parameters and lubrication conditions on the fine and ultrafine particles in machining titanium-metal matrix composite (Ti-MMC) [Volume 11, Issue 3, 2024, Pages 63-70]
T
Taghipoor, Abbas Experimental study of the effect of nanoparticles produced from sugarcane bagasse charcoal (nano biochar) on the anti-wear properties of lubricants used in bearing housing of centrifugal pumps in the petrochemical industry [Volume 11, Issue 1, 2024, Pages 1-14]
Tahmasbi, Vahid Temperature and surface quality investigation in orthogonal machining of cortical bone using response surface method and sensitivity analysis [Volume 11, Issue 12, 2025, Pages 64-78]
Tajdari, Mehdi Influence of the position of the center of the pipe relative to the rollers in the design of flower pattern in reshaping of cold roll forming [Volume 11, Issue 10, 2025, Pages 1-10]
Talebi-Ghadikolaee, Hossein Investigating the effect of polyurethane foam filling on the energy absorption of hybrid tubes with different thickness of composite layer [Volume 11, Issue 2, 2024, Pages 58-68]
Talebi-Ghadikolaee, Hossein Determination of dynamic plastic deformation behavior of DP 590 steel [Volume 11, Issue 4, 2024, Pages 13-25]
Tarshizi, Mohammad Study of surface roughness, texture, and dimensional accuracy in thread whirling of Ti6Al4V screw [Volume 11, Issue 4, 2024, Pages 1-12]
Toozandehjani, Hossein Investigating the energy absorption of sandwich panel with aluminum core and skin under Quasi-static loading: A numerical and experimental study [Volume 11, Issue 1, 2024, Pages 61-75]
V
Vahdati, Mahdi Modeling and optimization of variables affecting tensile properties of printed PP/Cu composite samples using LDM process [Volume 11, Issue 8, 2024, Pages 10-19]
Vahdati, Mahdi Experimental study and statistical analysis of the effect of ultrasonic shot peening on the microhardness of the cross section of steel samples [Volume 11, Issue 7, 2024, Pages 46-52]
Vesal, Mohammad Amin Investigation of the impact of blade failure on the performance of a nonlinear bladed disk-shaft system [Volume 11, Issue 11, 2025, Pages 37-51]
Z
Zabih Hosseinian, Nahid Implementation of direct velocity feedback using the active dynamic actuator in order to reducing chatter vibration in boring [Volume 11, Issue 6, 2024, Pages 1-15]
Zakeri, Amir Investigating the energy absorption of sandwich panel with aluminum core and skin under Quasi-static loading: A numerical and experimental study [Volume 11, Issue 1, 2024, Pages 61-75]
Zal, Vahid Investigating the effect of polyurethane foam filling on the energy absorption of hybrid tubes with different thickness of composite layer [Volume 11, Issue 2, 2024, Pages 58-68]
Zamani, Mohammad Ali The effect of parameters on joint strength in continuous ultrasonic welding of polypropylene reinforced with woven glass fibers [Volume 11, Issue 10, 2025, Pages 56-65]
Zangene Najafi, Mohammad Developing surface roughness prediction model using deep convolutional network [Volume 11, Issue 11, 2025, Pages 26-36]
Zarepour Firouzabadi, Hamid A hybrid lapping/anodizing technique for surface modification of the tungsten carbide mechanical seals used in direct reduction plant compressors of steel production industries [Volume 11, Issue 3, 2024, Pages 26-37]
Zeinolabedin-Beygi, Ali Study of surface roughness, texture, and dimensional accuracy in thread whirling of Ti6Al4V screw [Volume 11, Issue 4, 2024, Pages 1-12]
Zohourkari, Iman The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050 [Volume 11, Issue 1, 2024, Pages 15-27]
