Abbasi, Seyed Mahdi Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
Abbasi Dareh Bidi, Hadis High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
Abbasi Mobarakeh, Hamidreza Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
Abdollahi, Amir Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
Abolghasemian, Milad Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2024, Pages 1-12]
Abootorabi, Mohammad Mahdi The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
Afshari, Davood Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
Afshari, Hossein Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
Aghababaei, Amir Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
Ahmadi, Fateme Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
Ahmadi Khatir, Farzad Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2024, Pages 66-75]
Akbari, Davood Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
Akbari, Habibollah Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
Akbari, Mostafa Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
Akhondzadeh, Adly Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
Akhoundi, Behnam Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
Akhoundi, Behnam Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2024, Pages 16-23]
Ali Askari, Kamyab Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
Alizadi Balegh, Karim Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2023, Pages 1-18]
Amani Raftar, Ali The effect of screw arrangement and drilling parameters on the fracture fixation strength of femoral neck [Volume 10, Issue 10, 2023, Pages 70-81]
Ameri, Sara Experimental study and improving the manufacturing process of brass wire in wire-cut machining [Volume 10, Issue 5, 2023, Pages 79-91]
Amini, Ehsan The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
Amini, Saeid Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
Amirian, Ghasem Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2023, Pages 17-26]
Arabgol, Fatemeh Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
Arabqomi, Hamid Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
Asadi, Parviz Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
Asadi, Parviz Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
Asadi, Parviz Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2024, Pages 39-48]
Asadi Borujeni, Behroz Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
Ashrafi, Amir Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
Azaran, Mohammad Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications [Volume 10, Issue 7, 2023, Pages 45-56]
Azdast, Taher Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
Azimpour Shishevan, Farzin Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
Azizi Yousefvand, Mohammad Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
B
Baghestani, Ali-Mohammad The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
Bakhshi-Jooybari, Mohammad Experimental investigation of electro plastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test [Volume 10, Issue 7, 2023, Pages 1-9]
Bani Mostafa Arab, Nasrollah Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
Bani Mostafa Arab, Nasrollah Statistical analysis and optimization of friction stir additive manufacturing process variables for aluminum silicon carbide nanocomposite using the response surface method [Volume 10, Issue 11, 2024, Pages 24-38]
Baraheni, Mohammad Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
Bazhian, Maziyar Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
Behravesh, َََAmir Hossein Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
Bidarmaghz, Sadegh The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
D
Dadgar Asl, Yaghoub Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
Dadgar Asl, Yaghoub Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2024, Pages 61-76]
Danesh, Mahdi Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
Davoodi, Behnam Performance evaluation of self-propelled rotary tool in turning [Volume 10, Issue 8, 2023, Pages 27-35]
Davoodi, Hoori Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2024, Pages 1-12]
Dehghani, Ali The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
Deilami Azodi, Hamed Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
Delfani, Iman Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
E
Eftekhari Shahri, Seyyed Ehsan Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
Eftekhari Shahri, Seyyed Ehsan Experimental study of the effects of constrained groove pressing process on AA6061 sheet [Volume 10, Issue 8, 2023, Pages 49-59]
Ehsani, Hossein Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2024, Pages 28-38]
Elahi, Seyed Hossein Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
Elyasi, Majid Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
Elyasi, Majid Thermal analysis of hot spinning of commercially pure titanium by resistance heating [Volume 10, Issue 10, 2023, Pages 43-58]
Elyasi, Majid Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2024, Pages 66-75]
Emamian, Yaser Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
Entezarian, Mohammad Mahdi Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
Esfandiari Ghollezu, Sara Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
Eslami, Seyed Hossein Experimental investigation of electro plastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test [Volume 10, Issue 7, 2023, Pages 1-9]
Etemadi haghighi, Shahram Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
Ezzati, Morteza Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
F
Fadaei Tehrani, Alireza Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling [Volume 10, Issue 9, 2023, Pages 11-18]
Faraji, Ghader Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method [Volume 10, Issue 8, 2023, Pages 20-26]
Farkhondeh, Amirhesam Experimental investigation of electro plastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test [Volume 10, Issue 7, 2023, Pages 1-9]
Farrokhabadi, Amin Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
Farrokhabadi, Amin Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2024, Pages 39-52]
Farshidianfar, Mohammad Hossein Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
Farshidianfar, Mohammad Hossein Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
Fathi, Alireza The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts [Volume 10, Issue 8, 2023, Pages 36-48]
Fazli, Ali Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2024, Pages 39-48]
Feizlou, Nima Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
G
Gazor, Mohammad sajjad Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2024, Pages 39-52]
Ghaemi Sarcheshmeh, Masoumeh Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
Ghafari, Mohsen Thermal analysis of hot spinning of commercially pure titanium by resistance heating [Volume 10, Issue 10, 2023, Pages 43-58]
Ghanbari, Davood Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2024, Pages 53-65]
Ghasemi, Arash Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
Ghasemi, Hamid Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2023, Pages 27-36]
Ghasemi Mighani, Hamid Analysis of a Crotch corner crack in the shell-nozzle junction of a cylindrical pressure vessel under internal pressure using the J-integral method [Volume 10, Issue 10, 2023, Pages 1-10]
Ghavami Namin, Behzad Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores [Volume 10, Issue 7, 2023, Pages 36-44]
Gholami, Moein Experimental study of the effects of constrained groove pressing process on AA6061 sheet [Volume 10, Issue 8, 2023, Pages 49-59]
Gholami, Mohammad Hadi Experimental study of the effects of the ultrasonic peening process on residual stress and surface hardness of parts cut with Wire EDM [Volume 10, Issue 9, 2023, Pages 19-31]
Golbaz, Sepehr Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
Golzar, Mohammad Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
Gorji, Hamid Experimental investigation of electro plastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test [Volume 10, Issue 7, 2023, Pages 1-9]
H
Hajialimohammadi, Alireza Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
Hamdollahzade, Amir Hosein Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2023, Pages 1-15]
Hasanzadeh, Rezgar Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
Hashemi, Ramin Experimental study and improving the manufacturing process of brass wire in wire-cut machining [Volume 10, Issue 5, 2023, Pages 79-91]
Hashemi, Seyed Jalal Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
Hedayati, Seyyed Kaveh Investigation of mechanical and thermal properties of continuous metal wire reinforced samples in fused deposition modeling for shape memory stimulus [Volume 10, Issue 9, 2023, Pages 51-58]
Hemmati, Seyed Jalal Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
Heydari, Ali Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
Hojjat, Yousef Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores [Volume 10, Issue 7, 2023, Pages 36-44]
Hojjat, Yousef Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2024, Pages 13-27]
Honarpisheh, Mohammad Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
Hosseini, Shahram Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
I
Izadi, Hadi Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
J
Jabbari Mostahsan, Amirhossein Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
Jafarzadeh, Hossein Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2023, Pages 1-18]
Jafarzadeh, Hossein Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2024, Pages 39-48]
Jalil, Alireza Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
Jandaghi Shahi, Vahid Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
K
Karafi, Mohammad Reza Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
Karevan, Mehdi High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
Karimi, Zahra Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
Karimi Ivanaki, Moahmmad Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
Kashfi, Mohammad An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
Kazemi, Hossein Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2024, Pages 53-65]
Kazemzadeh, Arya Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method [Volume 10, Issue 8, 2023, Pages 20-26]
Khadem, Mohsen Experimental feasibility study of forming copper sheets by vacuum forming method [Volume 10, Issue 8, 2023, Pages 11-19]
Khodakarami, Mohammad Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
Khosravian, Erfan Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2024, Pages 16-23]
Khosravi Farsani, Ayoub Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
Khouzestani, Alireza Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2024, Pages 13-27]
Kiani, Yashar Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2024, Pages 61-76]
KianiMajd, Mehdi Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
Kollahi, AliReza Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
L
Lajevardi, Masoumeh Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2024, Pages 1-12]
M
Maghsoudpour, Adel Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2023, Pages 19-43]
Majzoobi, Gholamhossein An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
Maleki, Hossein Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
Maleki, Hossein Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate [Volume 10, Issue 11, 2024, Pages 39-48]
Mashayekhi, Ahmad Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
Mazidi, Abbas Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2023, Pages 17-26]
Mazloom Baghsiahi, Sajjad Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications [Volume 10, Issue 7, 2023, Pages 45-56]
Mirnia, Mohammad Javad Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
Mirnia, Mohammad Javad Thermal analysis of hot spinning of commercially pure titanium by resistance heating [Volume 10, Issue 10, 2023, Pages 43-58]
Mirzamohammadi, Sadegh Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
Moallemzadeh, Alireza Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
Modanloo, Vahid Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
Modanloo, Vahid Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
Modanloo, Vahid Deposition of continuous glass fibers on a curved surface by 3D printer based on fused filament fabrication technology [Volume 10, Issue 11, 2024, Pages 16-23]
Modaresinia, Hasan Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2023, Pages 53-64]
Moetakef Imani, Behnam Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications [Volume 10, Issue 7, 2023, Pages 45-56]
Moetakef-Imani, Behnam Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle [Volume 10, Issue 9, 2023, Pages 1-10]
Moghaddam Matin, Maryam Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications [Volume 10, Issue 7, 2023, Pages 45-56]
Mohammadi, Aminollah Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
Mohammadi, Aminollah Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling [Volume 10, Issue 9, 2023, Pages 11-18]
Mollaei Dariani, Bijan Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
Moradzadeh, Vahid Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
Morakabati, Maryam Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2023, Pages 65-76]
Moslemi Naeini, Hassan Experimental and numerical analysis of spring-back on flower pattern design in the reshaping process of square section pipe [Volume 10, Issue 11, 2024, Pages 61-76]
Mousavi, Seyed Mohammad Hossein Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
Mousavi, Seyed Morteza Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
Mousavi, Seyed Morteza Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
Mousavi Jarahi, Kiana Sadaat Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores [Volume 10, Issue 7, 2023, Pages 36-44]
Movahhedy, Mohammad Reza Investigating the influencing parameters on the surface roughness of polymer parts made by Fused Deposition Modeling with respect to laser polishing [Volume 10, Issue 9, 2023, Pages 42-50]
N
Naderi, Malek Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2023, Pages 68-78]
Nakhaei, Mohammad Reza Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2023, Pages 1-15]
Nasiri Jan Agha, Mohammadreza Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2024, Pages 1-12]
Nasr-Esfahani, Mohammad Hossein Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2024, Pages 13-27]
Nejati Eghteda, Sina Three-Dimensional geometry profile extraction of deposits using linear laser scanning in the directed energy deposition additive manufacturing method [Volume 10, Issue 7, 2023, Pages 17-25]
Nikandish, Pezhman Presenting the mathematical model of the variable flow rate axial piston pump with the displacement control valve [Volume 10, Issue 4, 2023, Pages 1-16]
Nikandish, Pezhman Analysis and investigation of the characteristics of the flow and the force on the poppet including the edge of the flow deviation in the hydraulic check valve [Volume 10, Issue 11, 2024, Pages 1-15]
Niknam, Seyed Ali The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2024, Pages 49-60]
Niksirat, MirMeysam Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
O
Oliazadeh, Pouria Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
P
Pak, Abbas Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061 [Volume 10, Issue 7, 2023, Pages 26-35]
Palizdar, Yahya Investigating the microstructure and mechanical properties of vanadium bearing Delta-Trip Steel [Volume 10, Issue 10, 2023, Pages 11-25]
Partanian, Mohammad Amir Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle [Volume 10, Issue 9, 2023, Pages 1-10]
Pour, Masoud Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
Purhaji, Mohammad Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2023, Pages 1-15]
R
Rahimi, Gholamhosein Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
Rahimi Asiabaraki, Hossein Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
Rahimi Asiabaraki, Hossein Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
Rahmani, Farzad Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
Rahmatinejad, Bahman Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2023, Pages 40-52]
Rahnama, Houman Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling [Volume 10, Issue 9, 2023, Pages 11-18]
Raiat Roknabadi, Alireza Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
Rajabi, Reza Evaluation of the effects of immersion cooling grinding (ICG) method on the surface characteristics and microstructural changes in grinding of CK45 steel [Volume 10, Issue 8, 2023, Pages 1-10]
Rakhshkhorshid, Masoud Experimental study of the effects of constrained groove pressing process on AA6061 sheet [Volume 10, Issue 8, 2023, Pages 49-59]
Refahi Oskouei, Amir Statistical analysis and optimization of friction stir additive manufacturing process variables for aluminum silicon carbide nanocomposite using the response surface method [Volume 10, Issue 11, 2024, Pages 24-38]
Rezai Ashtiani, Hamid Reza Production of aluminum-based composites from recycled chips by hot extrusion processing [Volume 10, Issue 12, 2024, Pages 28-38]
Rezayat, Hamid Reza Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
Ronaghi, Alireza Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
Roohol amini Ahangar, Meghdad Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2023, Pages 29-39]
Rostami, Milad Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams [Volume 10, Issue 7, 2023, Pages 10-16]
S
Sabet, Seyed Alireza Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
Sadeghi, Mohammad Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2023, Pages 44-56]
Sadeghian, Hesam Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2024, Pages 13-27]
Safi Jahanshahi, Amin Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
Safi Jahanshahi, Amin Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel [Volume 10, Issue 12, 2024, Pages 66-75]
Saghafi, Hamed Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
Salamat-Talab, Mazaher Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites [Volume 10, Issue 12, 2024, Pages 53-65]
Samimi, Hamed Investigating the effect of the ultrasonic hammer peening on the wear properties of Aluminum alloy 6061 [Volume 10, Issue 7, 2023, Pages 26-35]
Sarkhosh, Reza Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2023, Pages 62-77]
Sedehi, Sayyed Mohammadreza Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
Sedghi, Arman Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2023, Pages 57-67]
Sedighi, Mohammad Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
Sedighi, Mohammad The effect of continuous hot-dip galvanized steel coating thickness on the properties of dissimilar steel-magnesium joining using resistance spot welding [Volume 10, Issue 10, 2023, Pages 59-69]
Shahbazi, Mohammad The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2024, Pages 49-60]
Shahvari, Reyhaneh Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending [Volume 10, Issue 12, 2024, Pages 39-52]
Shahverdi, Hamidreza Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
Sharifizadeh, Mohammad Statistical analysis and optimization of friction stir additive manufacturing process variables for aluminum silicon carbide nanocomposite using the response surface method [Volume 10, Issue 11, 2024, Pages 24-38]
Shirafkan, Ali An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2023, Pages 37-47]
Shirazi, Reza Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
Shouri, Amir Mahdi Simulation of the forming process and the spring back of the spacer part using the finite element method [Volume 10, Issue 9, 2023, Pages 32-41]
Siahvashi, Amin The use of a neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys [Volume 10, Issue 11, 2024, Pages 49-60]
Soltani, Sadegh Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
T
Taghipour Lahijani, Yasser Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2023, Pages 48-61]
Talebi-Ghadikolaee, Hossein Investigating the effect of flexible forming process variables on the uniformity of thickness distribution in U-Shaped Micro-channels [Volume 10, Issue 2, 2023, Pages 41-48]
Tavalaee, Marziyeh Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena [Volume 10, Issue 12, 2024, Pages 13-27]
Toozandehjani, Hossein Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
V
Vaseei, Masoud Failure mode effects and criticality analysis on C.N.C lathe engine spindle system in uncertain condition [Volume 10, Issue 12, 2024, Pages 1-12]
Z
Zabihi Gargari, Mohammad Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2023, Pages 16-28]
Zahedi Dizajyekan, Ali Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
Zakeri, Amir Experimental study of energy absorption of sandwich panel with composite/elastomer skin [Volume 10, Issue 10, 2023, Pages 26-42]
Zare, Vahid Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2023, Pages 17-26]
Zeinali, Mohammad High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
