Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Experimental investigation and optimization of the effect of process parameters in bone machining on bone surface quality

Document Type : Original Article

Authors
Mohammad Mokhtari 1
Vahid Abedini 2
Mohammad Azadi 3
1 PhD Candidate, Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
2 Assistant Professor, Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
3 Associate Professor, Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
10.22034/ijme.2024.471623.1999
Abstract
Bone drilling is a common procedure in orthopedics. During the bone drilling process, heat is generated, which can lead to cell death and consequently alter the mechanical properties of the bone. Additionally, the surface quality of the drilled area changes depending on the drilling parameters, which can significantly affect the healing period, treatment success, and the patient's pain experience. This study aims to identify the drilling process parameters that influence the surface quality of bone drilling to approach minimally invasive surgery. The rotational speed, feed rate, and tool diameter in the drilling process affect the bone temperature and axial force, impacting the surface quality. In this research, fresh femur bone from a 3-year-old cow with a cortical bone thickness of 9–11 mm in the diaphysis was used. Based on the findings of this study, it is recommended that a rotational speed of 50 rpm, a feed rate of 50 mm/min, and a tool diameter of 2.5 mm be used during the drilling process to reduce cracking and surface roughness in the drilled area.
Keywords
Surface Quality
Bone Drilling
Profilometer
[1]   Alam K, Al-Ghaithi A, Piya S, Saleem A. In-vitro experimental study of histopathology of bone in vibrational drilling. Medical engineering & physics. 2019 May 1;67:78-87. doi: 10.1016/j.medengphy.2019.03.013
[2]   Torun Y, Öztürk A. A new breakthrough detection method for bone drilling in robotic orthopedic surgery with closed-loop control approach. Annals of Biomedical Engineering. 2020 Apr;48(4):1218-29. doi: 10.1007/s10439-019-02444-5
[3]   Pandey RK, Panda SS. Drilling of bone: A comprehensive review. Journal of clinical orthopaedics and trauma. 2013 Mar 1;4(1):15-30. doi: 10.1016/j.jcot.2013.01.002
[4]   Gupta V, Pandey PM, Mridha AR, Gupta RK. Effect of various parameters on the temperature distribution in conventional and diamond coated hollow tool bone drilling: a comparative study. Procedia engineering. 2017 Jan 1;184:90-8. doi: 10.1016/j.proeng.2017.04.074
[5]   Alam K. Experimental and numerical investigation of cracking behavior of cortical bone in cutting. Technology and Health Care. 2014 Jan 1;22(5):741-50. doi: 10.3233/THC-140848
[6]   Tuijthof GJ, Frühwirt C, Kment C. Influence of tool geometry on drilling performance of cortical and trabecular bone. Medical engineering & physics. 2013 Aug 1;35(8):1165-72. doi: 10.1016/j.medengphy.2012.12.004
[7]   Augustin G, Davila S, Mihoci K, Udiljak T, Vedrina DS, Antabak A. Thermal osteonecrosis and bone drilling parameters revisited. Archives of orthopaedic and trauma surgery. 2008 Jan;128:71-7. doi: 10.1007/s00402-007-0427-3
[8] Jacobs CR, Temiyasathit S, Castillo AB. Osteocyte mechanobiology and pericellular mechanics. Annual review of biomedical engineering. 2010 Aug 15;12(1):369-400. doi: 10.1146/annurev-bioeng-070909-105302
[9]   Fallah MM, Mohamadi M, Sheikhi M, Shakouri E, Panahizadeh V. Analytical investigation of influence of rotational speed and feed rate on temperature elevation in jawbone drilling. Iranian Journal of Manufacturing Engineering. 2022 Mar 21;9(1):54-62. doi: 10.22034/ijme.2022.155986 [In Persian]
[10] Chen JH, Liu C, You L, Simmons CA. Boning up on Wolff's Law: mechanical regulation of the cells that make and maintain bone. Journal of biomechanics. 2010 Jan 5;43(1):108-18. doi: 10.1016/j.jbiomech.2009.09.016
[11] Karaca F, Aksakal B, Kom M. Effects of bone drilling on local temperature and bone regeneration: an in vivo study. Acta Orthopaedica et Traumatologica Turcica. 2014 Jan 1;48(3):326-32.doi: 10.3944/AOTT.2014.3074
[12] Tahmasbi V, Rabiee AH, Qasemi R, Qasemi M. Intelligent modeling of cutting force in bone micromilling process by fuzzy logic. Iranian Journal of Manufacturing Engineering. 2023 Feb 20;9(12):54-62. doi: 10.22034/ijme.2023.407192.1809 [In Persian]
[13] Alam K, Qamar SZ, Iqbal M, Piya S, Al-Kindi M, Qureshi A, Al-Ghaithi A, Al-Sumri B, Silberschmidt VV. Effect of drill quality on biological damage in bone drilling. Scientific Reports. 2023 Apr 17;13(1):6234. doi: 10.1038/s41598-023-33381-y
[14] Rugova S, Abboud M. Standardized Testing for Thermal Evaluation of Bone Drilling: Towards Predictive Assessment of Thermal Trauma. Bioengineering. 2024 Jun 24;11(7):642. doi: 10.3390/bioengineering11070642
[15] Zhai Y, Han G, Gao Q, Zhang W, Bai W. Experimental investigation on longitudinal torsional ultrasonic vibration milling for cortical bone. Journal of Manufacturing Processes. 2024 Jun 30;120:529-41. doi: 10.1016/j.jmapro.2024.04.072
[16] Tahmasbi V, Qasemi M, Ghasemi R, Gholami R. Experimental study and sensitivity analysis of force behavior in cortical bone milling. Medical Engineering & Physics. 2022 Jul 1;105:103821. doi: 10.1016/j.medengphy.2022.103821
[17] Pell DJ, Soshi M. Analysis and optimization of bone machining for robotic orthopedic surgeries. The International Journal of Medical Robotics and Computer Assisted Surgery. 2018 Aug;14(4):e1910. doi: 10.1002/rcs.1910
[18] Ein-Afshar MJ, Shahrezaee M, Shahrezaee MH, Sharifzadeh SR. Biomechanical evaluation of temperature rising and applied force in controlled cortical bone drilling: an animal in vitro study. Archives of Bone and Joint Surgery. 2020 Sep;8(5):605. doi: 10.22038/abjs.2020.45014.2233