Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Journal Archive

Most Visited Articles
Designing and manufacturing a novel polymeric hybrid auxetic structure using 3D printing method by combining arrow-head and missing rib structures
Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications
Experimental investigation of mechanical and microscopic properties of ABS-Ni composite made by Fused Deposition Modeling (FDM) method
Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model
Hydro assisted tube pressing as a new severe plastic deformation method for producing high strength tubes
Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings
Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating
Current Issue: Volume 12, Issue 7 - Serial Number 93, September 2025, Pages 1-95 

Experimental and numerical study of the effect of tensile speed on the strength of friction stir overlapping welding of polyamide Sheets

Pages 18-30

10.22034/ijme.2025.526860.2090

Hadi Safi Valilu, Moosa Sajed, Mohammad Ali Saeimi Sadigh, Sourosh Soltani Barcheloei, Vahid Tavoosi, Alireza Mohammadi

Keywords Cloud

  • Mechanical properties
  • Surface roughness
  • Additive Manufacturing
  • 3D Printing
  • Microstructure
  • optimization
  • Energy absorption
  • Residual Stress
  • Finite element simulation
  • Finite element method
  • Hardness
  • Nanocomposite
  • Drilling
  • Finite Element
  • Severe plastic deformation
  • Delamination
  • Aluminum
  • Simulation
  • Composite
  • corrosion
  • response surface method
  • tensile strength
  • Sandwich Panel
  • image processing
  • Material removal rate
  • Temperature
  • Friction Stir Welding
  • machining
  • FEM
  • Wear
  • Sensitivity analysis
  • Taguchi method
  • Spring Back
  • Genetic Algorithm
  • Tool Wear
  • numerical simulation
  • fused deposition modeling
  • ultrasonic
  • Ultrasonic Vibration
  • Turning
  • Incremental Forming
  • Bobbin Tool
  • Friction Stir Process
  • Numerical analysis
  • Fused deposition modeling (FDM)
  • Grinding
  • Grain Size
  • Rotational Speed
  • Milling
  • Surface Quality
  • Residual stresses
  • graphene
  • finite element analysis
  • Wear resistance
  • Artificial Neural Network
  • Minimum quantity lubrication (MQL)
  • ABAQUS
  • Laser Welding
  • Hot extrusion
  • CK45 steel
  • Fiber metal laminate
  • vibration
  • Tensile test
  • Ultrasonic Welding
  • Dimensional Accuracy
  • Finite element method (FEM)
  • force
  • Piezoelectric
  • structural health monitoring
  • Porous Structure
  • copper
  • microhardness
  • Composite Material
  • Machining Parameters
  • Modal Analysis
  • Sintering
  • Compressive strength
  • Thermography
  • Topology optimization
  • Friction Stir Processing
  • Strain Rate
  • Electrical Discharge Machining
  • Artificial intelligence
  • Friction stir spot welding
  • Brazing
  • Surface modification
  • fracture
  • Cutting force
  • Powder Metallurgy
  • Spring-back
  • Aluminum foam
  • Finite element model
  • Aluminum 7075
  • AA6061-T6
  • Low velocity impact
  • Corrosion Resistance
  • Digital shearography
  • Strength
  • Composites
  • Fused Filament Fabrication
  • Al-Mg2Si
  • Metal Matrix Composites
  • Aluminum Alloy 6061-T6
  • finite element modeling
  • Resistance spot welding
  • Thermoplastic composites
  • surface integrity
  • specific energy
  • microfluidic
  • Hardness testing
  • Thinning
  • Resistance spot weld
  • Al6061
  • Foam Density
  • Glass/epoxy composite
  • porosity
  • non-destructive testing
  • Neural Network
  • Austenitic stainless steel
  • Damage
  • Impact resistance
  • Fault Diagnosis
  • Continuous Ultrasonic Welding
  • Basalt fibers
  • Flexural Strength
  • Thermoplastic Materials
  • Response Surface Methodology
  • Dynamic recrystallization
  • Aluminum matrix composite
  • thermal necrosis
  • polypropylene
  • 3D printer
  • FDM
  • Sheet hydroforming
  • bone drilling
  • Experimental test
  • Ultrasonic Cleaning
  • Horn
  • Specific energy absorption
  • controller
  • Numerical Solution
  • cooling
  • impact test
  • FEM modeling
  • Silicon carbide
  • Electrical Discharge
  • Fiber metal laminates
  • Supercapacitor
  • Cold roll-forming
  • polyamide 6
  • Drilling parameters
  • Delamination factor
  • elastomer
  • Sheet Metal Forming
  • PLA
  • Machine Learning
  • Titanium aluminide intermetallic compound
  • morphology
  • Creep
  • Accumulative Roll Bonding
  • Recycling
  • Cavitation
  • surface treatment
  • Reliability
  • Dielectric Constant
  • AFM
  • Deep Learning
  • Damage model
  • Fatigue life
  • Structural properties
  • glass fiber
  • Composite sandwich panel
  • Flexural properties
  • Laser
  • CHIP
  • Magnetic field
  • Ultrasonic waves
  • Taguchi
  • Reshaping
  • Lost foam casting
  • Non-destructive test
  • Bone
  • axial force
  • Annealing
  • CFRP
  • Injection Molding
  • Polymer
  • Polylactic Acid
  • Alumina
  • retained austenite
  • Stability
  • fatigue
  • Design of experiment
  • Shape memory
  • bending strength
  • Implant
  • Filler Metal
  • Response surface methodology (RSM)
  • Glass fibers
  • Carbon Nanotube