Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Iranian Journal of Manufacturing Engineering

Journal Archive

Most Visited Articles
Designing and manufacturing a novel polymeric hybrid auxetic structure using 3D printing method by combining arrow-head and missing rib structures
Evaluation of energy absorption performance of 3D printed thin-walled polymer tubes and comparison with metal tubes in safety applications
Experimental investigation of mechanical and microscopic properties of ABS-Ni composite made by Fused Deposition Modeling (FDM) method
Manipulation dynamic modeling for micro/nano-devices manufacturing using the LuGre friction model
Hydro assisted tube pressing as a new severe plastic deformation method for producing high strength tubes
Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings
Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating
Current Issue: Volume 12, Issue 8 - Serial Number 94, October 2025, Pages 1-81 

Keywords Cloud

  • Mechanical properties
  • Surface roughness
  • Additive Manufacturing
  • 3D Printing
  • Microstructure
  • Energy absorption
  • optimization
  • Finite element simulation
  • Finite element method
  • Hardness
  • Residual Stress
  • Nanocomposite
  • Drilling
  • Delamination
  • tensile strength
  • Severe plastic deformation
  • Finite Element
  • Aluminum
  • Simulation
  • corrosion
  • Composite
  • response surface method
  • Sandwich Panel
  • machining
  • image processing
  • Temperature
  • Friction Stir Welding
  • Material removal rate
  • FEM
  • Wear
  • Sensitivity analysis
  • Tool Wear
  • Rotational Speed
  • ultrasonic
  • Taguchi method
  • numerical simulation
  • Genetic Algorithm
  • Spring Back
  • Turning
  • Ultrasonic Vibration
  • fused deposition modeling
  • Incremental Forming
  • Fused deposition modeling (FDM)
  • Bobbin Tool
  • Friction Stir Process
  • Numerical analysis
  • graphene
  • finite element analysis
  • Residual stresses
  • Grinding
  • Milling
  • Compressive strength
  • Surface Quality
  • Machining Parameters
  • fracture
  • Cutting force
  • Grain Size
  • Wear resistance
  • Artificial Neural Network
  • Minimum quantity lubrication (MQL)
  • ABAQUS
  • CK45 steel
  • Hot extrusion
  • Fiber metal laminate
  • Laser Welding
  • Ultrasonic Welding
  • Powder Metallurgy
  • Tensile test
  • Aluminum 7075
  • force
  • Electrical Discharge Machining
  • Finite element method (FEM)
  • microhardness
  • copper
  • Strain Rate
  • Piezoelectric
  • structural health monitoring
  • Sintering
  • Modal Analysis
  • Thermography
  • Porous Structure
  • Topology optimization
  • Friction Stir Processing
  • Artificial intelligence
  • Brazing
  • Surface modification
  • Corrosion Resistance
  • Friction stir spot welding
  • Low velocity impact
  • Aluminum foam
  • Spring-back
  • Dimensional Accuracy
  • Finite element model
  • vibration
  • AA6061-T6
  • Composites
  • Composite Material
  • Digital shearography
  • Strength
  • Fused Filament Fabrication
  • Tool geometry
  • Aluminum Alloy 6061-T6
  • Al-Mg2Si
  • finite element modeling
  • Damage
  • Resistance spot welding
  • Thermoplastic composites
  • specific energy
  • microfluidic
  • Hardness testing
  • Thinning
  • Resistance spot weld
  • Al6061
  • Foam Density
  • surface integrity
  • porosity
  • non-destructive testing
  • Neural Network
  • Austenitic stainless steel
  • Impact resistance
  • Continuous Ultrasonic Welding
  • Fault Diagnosis
  • Basalt fibers
  • Metal Matrix Composites
  • Flexural Strength
  • Thermoplastic Materials
  • Response Surface Methodology
  • Dynamic recrystallization
  • thermal necrosis
  • polypropylene
  • 3D printer
  • FDM
  • Sheet hydroforming
  • bone drilling
  • Experimental test
  • Ultrasonic Cleaning
  • Horn
  • Glass/epoxy composite
  • retained austenite
  • Numerical Solution
  • Polylactic Acid
  • FEM modeling
  • Annealing
  • elastomer
  • impact test
  • Supercapacitor
  • Lost foam casting
  • Fiber metal laminates
  • Delamination factor
  • Drilling parameters
  • Cold roll-forming
  • Electrical Discharge
  • PLA
  • Machine Learning
  • Accumulative Roll Bonding
  • morphology
  • glass fiber
  • Titanium aluminide intermetallic compound
  • AFM
  • Dielectric Constant
  • Reliability
  • surface treatment
  • Structural properties
  • Deep Learning
  • Recycling
  • Cavitation
  • Fatigue life
  • Creep
  • FEM ANALYSIS
  • Damage model
  • Composite sandwich panel
  • Sheet Metal Forming
  • Flexural properties
  • Laser
  • Magnetic field
  • CHIP
  • polyamide 6
  • Ultrasonic waves
  • Taguchi
  • Reshaping
  • Bone
  • Non-destructive test
  • CFRP
  • Polymer
  • Alumina
  • fatigue
  • Shape memory
  • Silicon carbide
  • cooling
  • controller
  • Stability
  • Design of experiment
  • metal powder
  • Response surface methodology (RSM)
  • Injection Molding
  • bending strength
  • Implant
  • Filler Metal
  • Carbon Nanotube
  • Buckling