@article { author = {Marzban, Mohammad Javad and Behgozin, Seyed Ahmad and Janghorban, Maziar and Afsari, Ahmad}, title = {Investigating the Effect of the Number of Passes and Tool Design in the Friction-Stirring Process on the Grain Size, Hardness and Wear Resistance of Ck45 Steel}, journal = {Iranian Journal of Manufacturing Engineering}, volume = {9}, number = {7}, pages = {29-38}, year = {2022}, publisher = {}, issn = {2476-504X}, eissn = {}, doi = {10.22034/ijme.2022.163350}, abstract = {Friction stir processing is widely used for improvement of properties and microstructure of Aluminum, Copper and Magnesium alloys but investigation on steels are limited. Due to the fact that steel alloys, in addition to aluminum, copper and magnesium alloys, have good engineering properties and vast applications in the industry, they need to be processed by friction-stirring process. In this regard, the present research examines the effect of frictional stirring process on grain size, hardness and wear resistance of Ck45 steel due to the number of passes and tool design. In this research, it was shown that the friction-stirring method can be an effective method to increase the hardness and wear resistance of this steel in such a way that increasing the number of passes causes more heat generation per unit length and also affects the grain size, hardness and probably atomic penetration. In general, with the increase in the number of passes, the size of the grains in the stirring area becomes larger, while the final hardness and wear resistance are determined under the joint effects of grain size and hardness. The results indicate that the hardness has increased by 42% and the amount of wear has decreased by 85% compared to the original sample by the frictional stirring process.}, keywords = {Friction-stirring process,CK45 steel,Grain Size,Hardness,Wear resistance}, title_fa = {بررسی اثر تعداد پاس و طراحی ابزار در فرآیند اصطکاکی اغتشاشی بر اندازه دانه، سختی و مقاومت سایشی فولاد Ck45}, abstract_fa = {فرایند اصطکاک-اغتشاشی برای اصلاح ساختار وخواص آلیاژهای آلومینیوم، مس، منیزیم وفولادها بکار گرفته شده است ولی میزان تحقیقات مرتبط با فولاد در این مورد بسیار کمتر است. با توجه به این که فولادها علاوه بر آلیاژهای آلومینیم، مس و منیزیم دارای خواص مهندسی خوب و کاربردهای بسیار فراوان در صنعت هستند، نیاز به بررسی بیشتر انواع فولاد با فرآیند اصطکاکی اغتشاشی احساس می‌شود. در این رابطه، تحقیق حاضر به بررسی تاثیر فرآیند اصطکاکی اغتشاشی بر اندازه دانه، سختی و مقاومت سایشی  فولاد Ck45 در اثر تغییر تعداد پاس و طراحی ابزار می­‌پردازد. در این تحقیق نشان داده شد که روش اصطکاکی اغتشاشی روش مؤثری برای افزایش سختی و مقاومت سایشی در این فولاد می­‌تواند باشد به گونه­‌ای که افزایش تعداد پاس باعث تولید حرارت بیشتر بر واحد طول شده و همچنین باعث تأثیر­گذاری بر اندازه دانه­‌ها، سختی و احتمالاً نفوذ اتمی می­‌گردد. بطور کلی در فرایند اصطکاکی-اغتشاشی با افزایش تعداد پاس، اندازه دانه‌­ها در ناحیه اغتشاشی بزرگتر می­‌شود در حالی‌که سختی نهایی و مقاومت سایشی تحت تأثیرات مشترک اندازه دانه و سختی تعیین می­‌گردد.  نتایج حاکی از آن است که سختی تا 42 درصد افزایش و میزان سایش تا 85 درصد نسبت به نمونه اولیه توسط فرآیند اصطکاکی اغتشاشی کاهش یافته است.}, keywords_fa = {فرآیند اصطکاکی-اغتشاشی,فولاد Ck45,اندازه دانه,سختی,مقاومت سایشی}, url = {https://www.iranjme.ir/article_163350.html}, eprint = {https://www.iranjme.ir/article_163350_0300f35c307043c74a78e04167d6c5e0.pdf} }