@article { author = {Tahmasbi, Vahid and Pak, Abbas and Zeinolabedin Beygi, Ali and HassanPour, Peyman}, title = {Experimental Analysis and Optimization of Thrust Force in the Orthopedic Drilling Process Using the Tool Coated with Titanium Nitride Nano Coating by the Physical Vapor Deposition Method}, journal = {Iranian Journal of Manufacturing Engineering}, volume = {9}, number = {5}, pages = {49-59}, year = {2022}, publisher = {}, issn = {2476-504X}, eissn = {}, doi = {10.22034/ijme.2022.160059}, abstract = {One of the most significant and applicable machining processes in surgeries and medical engineering is the bone drilling process. In this process, it is intended to minimize the axial force on the bone tissue during surgery. To reduce force, different methods have been considered; including the use of a variety of lubricants, ultrasonic oscillations, material replacement, tool geometry, and also the use of coated tools. The purpose of this paper is to investigate the effect of a specific type of nano coating on steel tool, and to investigate the effect of effective input parameters on force behavior in orthopedic drilling with medical requirements in mind. In this study, the polymeric material of poly-methyl-meta-carylate (PMMA), which has similar properties to the bone, was selected; and by creating titanium nitride nano coating on the tool, the effect of tool rotational speed, feed rate, and the tool diameter on the drilling process force have been extracted using the design of experiment by the response surface method, modeling and second-order linear regression equation governing the model. The optimum values of each input parameter are also presented in order to achieve the minimum and the best amount of force created during orthopedic drilling. The results show that the creation of titanium nitride nano coating reduces the force by 40 percent. Also, the axial force with the maximum cutting speed, the minimum feed rate, and in the tools with smaller diameters has been significantly reduced.}, keywords = {machining,Poly-methyl-meta-carylate drilling,force,response surface method,Medical nano coating}, title_fa = {تحلیل تجربی و بهینه‌سازی نیروی محوری در فرایند سوراخ‌کاری ارتوپدی با استفاده از ابزار پوشش‌دهی شده با نانو پوشش نیترید تیتانیوم به روش رسوب دهی فیزیکی}, abstract_fa = {یکی از حساس‌ترین و پرکاربردترین فرآیندهای ماشین‌کاری در جراحی­‌ها و مهندسی پزشکی، فرآیند سوراخ‌کاری استخوان می‌­باشد. در این فرآیند سعی برآن است تا نیروی محوری وارد بر بافت استخوان حین عمل جراحی کمینه شود. برای کاهش نیرو روش‌­های مختلفی از جمله استفاده از انجتم فرآیند در حالت سرعت بالا، خنک کاری با گاز، نوسانات فراصوتی، تغییر جنس و هندسه ابزار و همچنین استفاده از ابزارهای پوشش‌­دار مورد توجه قرار گرفته است. هدف از این مقاله بررسی اثر یک نوع نانو پوشش بر روی ابزار از جنس تیتانیوم نیتراید و بررسی اثر پارامترهای ورودی موثر بر روی رفتار نیرو در سوراخ‌کاری ارتوپدی با در نظر داشتن الزامات پزشکی می­‌باشد. در این پژوهش ماده پلیمری پلی­‌متیل‌­متاکریلات که خواصی نزدیک به استخوان دارد انتخاب و با ایجاد نانو پوشش از جنس تیتانیم نیترید بر روی ابزار، اثر سرعت دورانی ابزار، نرخ پیشروی و قطر ابزار بر روی نیروی فرایند سوراخ‌کاری با استفاده از طراحی آزمایش به روش سطح پاسخ، مدل‌سازی و معادله رگرسیون خطی مرتبه دوم حاکم بر مدل استخراج شده­ است. همچنین مقادیر بهینه هریک از پارامترهای ورودی به منظور دستیابی به بهترین و کمینه‌­ترین مقدار نیروی ایجاد شده در حین سوراخ‌کاری ارتوپدی ارائه شده است. نتایج نشان داده  است که ایجاد نانوپوشش تیتانیم نیترید باعث کاهش نیرو به مقدار 40 درصد شده است. همچنین نیروی محوری با بیشترین مقدار سرعت برشی و کمترین مقدار سرعت پیشروی و در ابزارهای با قطر کمتر، کاهش قابل ملاحظه‌­ای داشته است.}, keywords_fa = {ماشین‌کاری,سوراخ‌کاری پلی متیل متاکریلات,نیرو,روش سطح پاسخ,نانو پوشش پزشکی}, url = {https://www.iranjme.ir/article_160059.html}, eprint = {https://www.iranjme.ir/article_160059_0449800bfb5093be9eb8ed5b45b17e4a.pdf} }