@article { author = {Hedayatnejad, Rasoull and Sabet, Hamed and Rahmati, Sadegh and Salemi Golezani, Ali}, title = {Effect of laser power variation in AM-LMD process on Inconel 718 powder deposition profile on Inconel 738}, journal = {Iranian Journal of Manufacturing Engineering}, volume = {9}, number = {4}, pages = {1-11}, year = {2022}, publisher = {}, issn = {2476-504X}, eissn = {}, doi = {10.22034/ijme.2022.159957}, abstract = {The aim of this study was to investigate the effect of laser power variation on joint connection characteristics in the additive manufacturing (AM) process by depositing Inconel 718 powder on an Inconel 738 substrate in order to reconstruct defective gas turbine blades with a circular economy approach. Laser metal deposition (LMD) is a layer-by-layer fabrication technique used to manufacture and reconstruct critical and strategic parts. For this purpose, deposition with different power of 150, 250 and 350 watts was performed on the substrate. Some features such as geometric dimensions, number of pulses per layer and microstructure of the samples were studied. Comparing the results, it was found that with increasing strength, integrity, joint connection thickness and substrate melting depth increase. In contrast, with increasing power, surface porosity, and size deviation from the design dimensions, and the number of pulses to complete each layer decrease. Each deposition layer with power of 150, 250 and 350 watts was completed with 17, 11 and 9 pulses, respectively. By increasing the power from 150 watts to 350 watts, the surface porosity decreased by about 90%.}, keywords = {Additive Manufacturing,Laser Metal Deposition,Power,Superalloy,Inconel}, title_fa = {اثر تغییر توان لیزر در فرایند AM-LMD بر پروفیل رسوب پودر اینکونل 718 بروی اینکونل 738}, abstract_fa = {این تحقیق با هدف بررسی تأثیر تغییر توان لیزر بر مشخصات فصل مشترک در فرایند ساخت افزودنی (AM) با رسوب نشانی پودر اینکونل 718 بر روی زیرلایه از جنس اینکونل 738 به منظور بازسازی پره های معیوب توربین با رویکرد اقتصاد چرخشی انجام شد. رسوب فلز با لیزر (LMD) یک تکنیک ساخت لایه به لایه است که برای ساخت و تعمیر قطعات حیاتی و استراتژیک استفاده می‌­شود. برای این منظور، رسوب نشانی با توان مختلف 150، 250 و 350 وات بر روی زیرلایه، انجام پذیرفت. برخی از ویژگی‌­ها مانند ابعاد هندسی، تعداد پالس­‌ها در هر لایه و ریزساختار نمونه­‌ها مورد مطالعه قرار گرفت. با مقایسه نتایج، مشخص شد که با افزایش توان، یکپارچگی، ضخامت فصل مشترک و عمق ذوب زیرلایه افزایش می‌یابد. در مقابل، با افزایش توان، تخلخل سطحی، انحراف اندازه از ابعاد طراحی و تعداد پالس‌ها برای تکمیل هر لایه کاهش می‌یابد. هر لایه رسوب نشانی با توان 150، 250 و 350 وات به ترتیب با 17، 11 و 9 پالس تکمیل گردید. با افزایش توان از 150 وات به 350 وات، تخلخل سطحی حدود 90% کاهش یافت.}, keywords_fa = {ساخت افزودنی,رسوب نشانی فلز با لیزر,توان,سوپرآلیاژ,اینکونل}, url = {https://www.iranjme.ir/article_159957.html}, eprint = {https://www.iranjme.ir/article_159957_46c8cd9bed20f6c6fac9d684e976a4f6.pdf} }