@article { author = {Askari, Mohammad and Javadi, Mehrdad and Eslami Farsani, Reza and Geranmayeh, Abdolreza}, title = {The assessment of energy absorption capability of aluminum/epoxy-glass fibers laminates after exposer to the thermal cycling}, journal = {Iranian Journal of Manufacturing Engineering}, volume = {9}, number = {2}, pages = {30-40}, year = {2022}, publisher = {}, issn = {2476-504X}, eissn = {}, doi = {10.22034/ijme.2022.157560}, abstract = {In the real conditions, the composite structures set into the various environment conditions like thermal cycling. The aim of this work is to investigate the effect performing the thermal cycling on the absorbed energy capability of fibers metal laminates (FMLs) with aluminum skin and glass fibers/ epoxy composites core with the various stacking sequence of glass fibers. For this reason, in the first step, the FMLs with two unidirectional configurations (0˚/0˚/0˚/0˚، and 90˚/90˚/90˚/90˚) and two bi-directional configurations (+45˚/-45˚/-45˚/+45˚ and 0˚/90˚/90˚/0˚) were fabricated. Then, the samples were aged by 0, 1, 10, 30, 50 and 90 thermal cycles. Each thermal cycle was heating the samples up to 100 ˚C for 15 min, maintaining in this temperature for 5 min, and cooling them down to the ambient temperature for 15 min. After that, measuring the absorbed energy and characterizing the mechanisms were investigated by Charpy impact test, macrostructural method and microscopic analysis. The obtained results showed, up to 10 thermal cycles in the FMLs with unidirectional configurations, the absorbed energy capability has improved. After that, it had the reducing trend. The minimum and maximum sensitivity of absorbed energy capability in the thermal cycling were seen into the samples with the configurations of +45˚/-45˚/-45˚/+45˚ and 0˚/90˚/90˚/0˚, respectively. The macrostructural investigation was showed, the delamination between fibers plies was the main failure mechanism in the FMLs, after performing 90 thermal cycles. By using the microscopic analysis was found that the thermal cycling caused to reduce the adhesion between glass fibers and epoxy matrix into the FML.}, keywords = {Fiber metal laminate,impact test,Thermal cycling,Energy absorption}, title_fa = {ارزیابی قابلیت جذب انرژی چند لایه اپوکسی-الیاف شیشه/آلومینیوم پس از قرارگیری در سیکل‌های گرمایشی}, abstract_fa = {در شرایط واقعی، سازه­های کامپوزیتی تحت شرایط محیطی متفاوت مانند سیکل­های حرارتی قرار می­گیرند. هدف تحقیق حاضر، بررسی تأثیر اعمال سیکل­های حرارتی بر قابلیت جذب انرژی چند لایه الیاف- فلز ساخته شده با پوسته آلومینیومی و هسته کامپوزیتی اپوکسی- الیاف شیشه با چیدمان­های متفاوت الیاف شیشه می­باشد. به همین دلیل در گام نخست، چند لایه الیاف- فلز با دو چیدمان تک جهته 0˚/0˚/0˚/0˚ و 90˚/90˚/90˚/90˚ و دو چیدمان دو جهته +45˚/-45˚/-45˚/+45˚ و 0˚/90˚/90˚/0˚ ساخته شدند. سپس، نمونه­های ساخته شده تحت سیکل­های حرارتی 0، 1، 10، 30، 50 و 90 سیکل قرار گرفتند. هر سیکل حرارتی شامل افزایش دما تا ˚C100 به مدت 15 دقیقه، نگه­داری در این دما به مدت 5 دقیقه و خنک کردن تا دمای محیط به مدت 15 دقیقه بود. پس از آن قابلیت جذب انرژی و شناسایی مکانیزم­ها توسط آزمون ضربه، بررسی ماکروساختاری و بررسی میکروسکوپی بررسی شدند. نتایج بدست آمده نشان داد که تا 10 سیکل حرارت­دهی در چند لایه­های الیاف- فلز با چیدمان تک جهته قابلیت جذب انرژی بهبود یافته است و پس از آن این قابلیت روندی کاهشی داشت. کم­ترین و بیش­ترین حساسیت قابلیت جذب انرژی به سیکل­های حرارتی به ترتیب در نمونه­ها با چیدمان­های +45˚/-45˚/-45˚/+45˚ و 0˚/90˚/90˚/0˚ مشاهده شدند. بررسی ماکروسکوپی نشان داد که پس از اعمال 90 سیکل حرارتی، جدایش بین لایه­های الیاف شیشه مکانیزم اصلی شکست در چندلایه­های الیاف فلز بود. با بررسی میکروسکوپی فهمیده شد که سیکل­های حرارتی بالا باعث کاهش چسبندگی بین الیاف شیشه و زمینه اپوکسی در چند لایه الیاف- فلز شده است.}, keywords_fa = {چند لایه الیاف- فلز,آزمون ضربه,شرایط گرمایشی,جذب انرژی}, url = {https://www.iranjme.ir/article_157560.html}, eprint = {https://www.iranjme.ir/article_157560_e5a6b31d20654c7a47f07c81fb825232.pdf} }