توسعه آزمون غیر مخرب حرارت نگاری مادون قرمز مدوله شده در عیب یابی مواد مرکب به وسیله فیلتر آشکار ساز لبه و ریخت شناسی توصیفی

نوع مقاله : مقاله پژوهشی

نویسندگان

1 مهندسی مکانیک، دانشگاه تربیت مدرس، تهران

2 مهندسی ساخت و تولید/دانشکده مهندسی مکانیک/دانشگاه تربیت مدرس

3 مکانیک، ساخت و تولید/دانشگاهتربیت مدرس، تهران

4 دانشجوی دکتری، مهندسی برق، دانشگاه تربیت مدرس، تهران

چکیده

در این مقاله به توسعه آزمون غیر مخرب حرارت‌نگاری مادون قرمز مدوله‌شده در عیب‌یابی مواد مرکب به وسیله فیلتر آشکار‌ساز لبه و ریخت‌شناسی توصیفی پرداخته شده -است. در حرارت‌نگاری مادون قرمز مدوله‌شده به منظور تحریک نمونه، شار حرارتی به صورت متناوب به سطح قطعه اعمال شده و پاسخ حرارتی به وسیله تبدیل فوریه پردازش و تصاویر دامنه و فاز استخراج می‌شوند. پس‌زمینه غیر یکنواخت مشاهده شده در تصاویر حاصل، اغلب قدرت تشخیص را پایین آورده و در برخی موارد موجب عدم شناسایی ناحیه معیوب می‌گردد؛ لذا برای بهبود ارزیابی این روش، فیلتر آشکار‌ساز لبه و ریخت شناسی توصیفی بر روی تصاویر اعمال می‌گردد. بررسی عددی در فرکانس‌های مختلف بر روی نمونه ایجاد شده با نقص‌های کنترل شده زیر سطحی در ابعاد و عمق‌های مختلف انجام و تصاویر حاصل پردازش شد. از تحلیل نتایج حاصل از پردازش تصاویر برای تشخیص و تعیین دقیق موقعیت عیوب استفاده و مشاهده شد که روش ارائه شده قابلیت تشخیص نقص را بالا برده و احتمال از دست دادن عیب را در فرکانس‌های مورد بررسی کاهش می‌دهد

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Development & Application of Modulated IR Thermography in Non-destructive Evaluation of Composite Materials by an edge detection filter and a morphological attribute profile

نویسندگان [English]

  • karim jamali 1
  • mohammad golzar 3
  • reza Naeimi Marandi 4
1 Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
3 Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
4 Department of Electrical Engineering, Tarbiat Modares University, Tehran, Iran
چکیده [English]

In this paper, development of modulated IR thermography non-destructive test has been addressed to detect and evaluate artificial subsurface defects in composite materials by an edge detection filter and a morphological attribute profile. At modulated IR thermography, In order to stimulate the test specimen, the heat flux is applied periodically over the surface of the specimen and the thermal response is decomposed by the Fourier transform method to extract its amplitude and phase images. The non-uniform backgrounds in the obtained images often reduce detection ability. In order to improve the evaluation of this method, an edge detection filter and a morphological attribute profile were applied to the images. Finite element analyses were applied for different frequencies on the model that were simulated with common controlled defects in composite materials. The results of image processing were used in order to locate the defects and it was observed that this method increases the defect detection ability and decreases the possibility of losing the defects in these frequencies.

کلیدواژه‌ها [English]

  • Non-destructive test
  • Thermography
  • Modulation
  • Edge detection
  • Morphological attributes