Main Subjects = Additive manufacturing
Deposition of Continuous Glass Fibers on a Curved Surface by 3D Printer Based on Fused Filament Fabrication Technology

Articles in Press, Accepted Manuscript, Available Online from 08 January 2024

10.22034/ijme.2024.429126.1885

Behnam Akhoundi; Erfan Khosravian; Vahid Modanloo


Statistical Analysis and Optimization of Friction Stir Additive Manufacturing Process Variables for Aluminum Silicon Carbide Nanocomposite Using the Response Surface Method

Articles in Press, Accepted Manuscript, Available Online from 01 February 2024

10.22034/ijme.2024.431334.1888

Mohammad Sharifizadeh; nasrollah bani mostafa arab; Amir Refahi Oskouei


The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts

Articles in Press, Accepted Manuscript, Available Online from 16 February 2024

10.22034/ijme.2024.434383.1906

Ehsan Amini; Alireza Fathi; Alimohammad Baghestani


Three-Dimensional Geometry Profile Extraction of Deposits Using Linear Laser Scanning in the Directed Energy Deposition Additive Manufacturing Method

Articles in Press, Accepted Manuscript, Available Online from 25 February 2024

10.22034/ijme.2024.435811.1919

Sara Esfandiari Ghollezu; Mohammad Hossein Farshidianfar; Sina Nejati Eghteda


Investigating the influencing parameters on the surface roughness of polymer parts by Fused Deposition Modeling with respect to laser polishing

Articles in Press, Accepted Manuscript, Available Online from 27 February 2024

10.22034/ijme.2024.437063.1921

Seyed Morteza Mousavi Bafrooee; Seyed Morteza Mousavi; Mohammad Reza Movahhedy


Investigation of Mechanical and Thermal Properties of Continuous Metal Wire Reinforced Samples in Fused Deposition Modeling for Shape Memory Stimulus

Articles in Press, Accepted Manuscript, Available Online from 15 March 2024

10.22034/ijme.2024.434021.1898

MASOUMEH GHAEMI SARCHESHMEH; َََAmir Hossein Behravesh; seyyed kaveh hedayati


Effects of adding nano silica on hardness and tensile properties of stereolithography 3d printed parts

Volume 7, Issue 10, December 2020, Pages 1-11

Zahra Shirband; Soheil Dariushi; Morteza Behzadnasab


Influence of infill density and printing pattern on flexural properties of 3D printed short carbon fiber PLA composite

Volume 7, Issue 9, November 2020, Pages 42-51

Seyyed Mohsen Mousavi Kani; Milad Sadegh Yazdi; Mohammad Hadi Hosseinzadeh


Investigation of physical and mechanical properties of 3D printed parts by using of ABS plastic filaments filled by alumina

Volume 7, Issue 4, June 2020, Pages 1-9

Arman Gholizadeh Roshan; Abbas Zolfaghari; Mohsen Shakeri