Three-Dimensional Geometry Profile Extraction of Deposits Using Linear Laser Scanning in the Directed Energy Deposition Additive Manufacturing Method

Articles in Press, Accepted Manuscript, Available Online from 25 February 2024

10.22034/ijme.2024.435811.1919

Sara Esfandiari Ghollezu; Mohammad Hossein Farshidianfar; Sina Nejati Eghteda

• View Article

Investigating the influencing parameters on the surface roughness of polymer parts by Fused Deposition Modeling with respect to laser polishing

Articles in Press, Accepted Manuscript, Available Online from 27 February 2024

10.22034/ijme.2024.437063.1921

Seyed Morteza Mousavi Bafrooee; Seyed Morteza Mousavi; Mohammad Reza Movahhedy

• View Article

Investigation of Mechanical and Thermal Properties of Continuous Metal Wire Reinforced Samples in Fused Deposition Modeling for Shape Memory Stimulus

Articles in Press, Accepted Manuscript, Available Online from 15 March 2024

10.22034/ijme.2024.434021.1898

MASOUMEH GHAEMI SARCHESHMEH; َََAmir Hossein Behravesh; seyyed kaveh hedayati

• View Article

Experimental investigation of the compressive strength of polylactic acid/continuous glass fiber composite material produced with an extrusion-based 3D printer using the simultaneous impregnation system of fibers and polymer

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.442326.1929

Amin Safi Jahanshahi

• View Article

Experimental investigation of mechanical and microscopic properties of ABS-Ni composite made by Fused Deposition Modeling (FDM) method

Volume 9, Issue 9, November 2022, Pages 10-20

10.22034/ijme.2023.371411.1716

Siavash Moayedi Manizani; Jamal Zamani Ashani; Mohammad Salehi

• View Article
• PDF 1.02 M

Investigating and comparing the mechanical properties of ABS/GF continuous fiber composite and ABS polymer produced by fused deposition modeling method

Volume 9, Issue 9, November 2022, Pages 26-34

10.22034/ijme.2023.375334.1722

Amir Mohammad Manouchehri; Mohammad Golzar; Ali Masoudi; Hadi Ghorbani

• View Article
• PDF 711.6 K

Determination of the type of anisotropy and stiffness tensor in additive manufacturing polymer components by using ultrasonic waves

Volume 9, Issue 6, September 2022, Pages 36-48

10.22034/ijme.2022.160940

Alireza Bagheri-Bami; Farhang Honarvar

• View Article
• PDF 659.87 K

Effect of laser power variation in AM-LMD process on Inconel 718 powder deposition profile on Inconel 738

Volume 9, Issue 4, July 2022, Pages 1-11

10.22034/ijme.2022.159957

Rasoull Hedayatnejad; Hamed Sabet; Sadegh Rahmati; Ali Salemi Golezani

• View Article
• PDF 1.34 M

Additive manufacturing of nickel-based superalloy gas turbine components

Volume 9, Issue 3, June 2022, Pages 38-45

10.22034/ijme.2022.157668

Ali Mohammad Kolagar

• View Article
• PDF 1.03 M

Computer-aided Porous Structure Implant Design and Analysis using Triply periodic minimal surface

Volume 8, Issue 1, March 2021, Pages 46-54

Mahdi Sarkari; Sadegh Rahmati; Mohammad Nikkhoo

• View Article
• PDF 1.19 M

Topology Optimization Of Structures With Thermal And Mechanical Loading

Volume 7, Issue 12, February 2021, Pages 54-63

sorush Mojiri; Ali Reza Shafiei

• View Article
• PDF 2.67 M

Optimized thermal gradient by changing temperature parameters for laser-assisted additive manufacturing process based on polyamide-12 powder using numerical model

Volume 5, Issue 4, March and April 2019, Pages 26-36

ahmad manshoori yeganeh; saeed khodaygan; Mohammad Reza Movahhedy

• View Article
• PDF 939.47 K